Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Exit
djmattyz
Enthusiast
djmattyz
Enthusiast
Activity
‎Aug 11, 2019
04:10 PM
i am creating visual loops for display on very large LED panels on stage for a tv show they are repetetive loops (10, 12, 15, 20 seconds long) we have noticed skipped frames and stuff whenever using footage of differing frame rates in the past, and when it is baked into some footage it can be very frustrating. so we opted to conform all of the frame rates to the ideal frame rate that the screens seem to want to work at from the get-go , just for peace of mind. interestingly our cameras work at 25fps, but the screens go at 30fps, but, for some reason unknown to me, this isnt a problem for banding etc... yes ,i do understand that the keyframes etc will not move in this situation, but im really working on a template here that will be a blank palette to work with. i want all of this to be uniform, which is one reason i need all of the footage to be uniform too
... View more
‎Aug 11, 2019
02:43 PM
hi rick thanks for that i need to conform all of the footage in the project to 30fps, so as not to have any blended, or skipped frames. that is actually the reason for it. i am setting each piece of footage to conform to 30fps as i import it, but i just want to be sure that the comps are 30fps all the way up the tree so as to avoid any possible artifacts. although with that said, it appears as though as long as the export comp matches the footage it seems to play back fine, but there are times when i need to loop the lower comps so i need them to match the frame rate of the footage for that.
... View more
‎Aug 11, 2019
12:18 PM
im working on a project which has 250 comps in it they were all created at 25fps but i have recently realised that the output needs to be 30fps is there any way to get it all to 30fps without having to individually go into each comp?
... View more
‎Aug 11, 2019
05:07 AM
is there a way to coform the footage to a given frame rate? as in, when you have 23.97 fps footage in a 25 fps sequence i want to make the 23.97 fps footage play at 25 fps, i understand it will play a little faster reason being i am noticing slight stutter in the footage, and i dont want that, i want it to look smooth thanks
... View more
‎Aug 08, 2019
05:52 AM
https://forums.adobe.com/people/Rick+Gerard wrote You can always just split the layer. Do your time manipulation on the second copy. will try this, rick, thankyou
... View more
‎Aug 08, 2019
05:45 AM
https://forums.adobe.com/people/Roei+Tzoref wrote if you change the frame rate of the original footage you will in fact either remove frames or duplicate frames so that's the same thing as skipped frames. to get a smooth playback you have to make sure you are working in a comp that's the same as your original frame rate. it's either that or use a tool to smartly convert to a master frame rate to use. if you have footage elements from different frame rate, the standard practice is that unless you have a specific frame rate in mind, work in the most common of all footage's frame rate. this way the least of them will be with skipped or duplicated frames. im looking to conform the footage to the comp. im working with 1000s of graphics clips, some are 30fps, some 29.97, some 24, but all of them have to conform to 25fps for the display screens. i dont mind if it plays 20% slower or faster as long as it is 1 frame per frame. the objective is not to lose any frames at all. i know this is possible by selecting "interpret footage" on each clip, then choosing to conform the frame rate to my choosen frame rate.. but i dont know if its possible to make this happen as a rule for all footage in a project, it would save me a lot of time.
... View more
‎Aug 08, 2019
04:33 AM
https://forums.adobe.com/people/Dave+LaRonde wrote When you timewarp a clip, it becomes shorter or longer. It only makes sense that the clip will be off... and you just have move it where you want along the timeline. yes, but it would be nice if it started only from the section of the clip that you are using otherwise, if you are only using a 10 second segment out of a ten minute long footage. your 10 seconds will get lost as soon as timewarp applies. you will now be looking at a completely different 10 seconds, and have to search to find the 10 seconds you previously had,which can be very difficult to find in a long clip, especially since you are now scrubbing through a clip that has timewarp applied, so it will be laggy on a lot of computer setups. timestretch doesnt behave this way as far as im aware, but timewarp does.
... View more
‎Aug 08, 2019
03:45 AM
can anyone tell me what these lines mean? i can reveal the clip in the project , so i do have it. but i cannot see the clips here in the project monitor when i play the sequence
... View more
‎Aug 08, 2019
02:48 AM
is there a way to force all footage to conform to 25fps without having to tell each clip individually? im working with a lot of different clips with different frame rates, so i need them all to conform so i get smooth playback, no skipped frames etc.
... View more
‎Aug 07, 2019
10:03 AM
1 Upvote
i saved a preset for exporting videos it has a lot of items checked so i dont want to have to do it every time. there is no 'load' preset button in the export menu, only 'save' preset and 'import' preset when i choose import preset it brings me to a general folder , not the folder where my presets are stored, premiere doesnt tell me where it was stored! searching the net has brought up a lot of old results from 2012 which may not be relevant anymore any ideas?
... View more
‎Aug 07, 2019
09:46 AM
when i add time warp to a clip i lose my position and find it very hard to find it again. the reason is because it timewarps the whole clip, so now the portion of the clip i am using has moved this creates a big problem as i try to search and find the part of the clip i want is there any way i can apply this effect without losing my position? i tried pre-comping but doesnt work
... View more
‎Aug 06, 2019
08:38 AM
thankyou guys, im editing from a list of instructions. the notes im given are assuming the clips start at 0 so this is the reason i need it to be 0 thanks for the quick replies
... View more
‎Aug 06, 2019
06:46 AM
as seen in the picture why does the time not say 00:00:00 when i am at the start of the clip in the source window?
... View more
‎Jul 31, 2019
08:52 AM
Thanking you kindly Señor
... View more
‎Jul 31, 2019
08:21 AM
hi this is a very difficult question to articulate but here goes. i would like to be able to duplicate a group or "tree" of different comps i dont want the comps to relate back to the same original comp, i want that comp to also be duplicated. i attached a little diagram of what i want to make it easier to understand the top layer is what i dont want. the bottom layer is what i want. any ideas how i can do that?
... View more
‎Jul 30, 2019
09:20 AM
as the description says, every time i try to click to change the name and destination of the media im exporting it opens the window but freezes happens on a variety of premire pro projects old and new also when i export my short film from media encoder its taking 8 hours, whereas it used to take 20 minutes in premiere. no idea why windows 10 home NVIDIA Geforce 1060 6gb gpu ram 32gb ram intel i7-7820HK 2.90GHz
... View more
‎Jul 19, 2019
03:17 AM
where is Lab?
... View more
‎Jul 18, 2019
09:30 AM
ok, but we have temperature adjustment in adobe premiere and after effects and we can use it on a JPG in the camera raw plugin in photoshop it doesnt have to be in kelvin as long as it achieves the desired effect.
... View more
‎Jul 18, 2019
09:05 AM
for some reason i do not find the feature request option very easily at this link it brings me to a community forum i dont see any feature request option
... View more
‎Jul 18, 2019
08:22 AM
i really think this is a missing feature in PS i know you can get one burried away in the camera raw plugin, but that takes you away from the composition into another window which is impractical. the photo filter plugin, kinda does it, but not in a very direct way either. why not just a temperature slide. so easy...
... View more
‎Jul 10, 2019
07:28 AM
the project file would be created on my computer, but i would be just reading the footage from the mac drive. its all about speed because we are shooting something that needs to be veyr quickly edited and uploaded, there is no time to copy across the data onto a windows drive. (@100GB this takes too long to transfer) i know there are some softwares that claim to allow you to read a mac drive, but i dont know if i can actually edit using premiere in this way.
... View more
‎Jul 10, 2019
06:52 AM
is it possible to edit a mac formatted hard drive on a PC using premiere?
... View more
‎Jul 06, 2019
02:51 AM
Im on update number 1803
... View more
‎Jul 05, 2019
03:01 PM
adobe fonts
... View more
‎Jul 05, 2019
02:23 PM
i have activated some fonts online but they dont show up in my software any ideas? im using windows 10
... View more
‎Jul 05, 2019
08:50 AM
thanks the only problem i have now is that illustrator thinks that the holes in the letters are white shapes *like the hole in the letter A or D do you know how to prevent that?
... View more
‎Jul 05, 2019
08:25 AM
can you suggest a simple way to extrude a PNG logo with text in it? im trying but it seems very complicated, After effects can only extrude shapes and text, but doesnt give me the option with PNGs i autraced it, but got stuck once i had the masks crated, didnt know where to go from there i also image traced it in illustrator, but when i being it into after effects, still no option to extrude im using cinema4d renderer
... View more
‎Jun 04, 2019
04:38 AM
thanks, that worked a treat
... View more
‎Jun 03, 2019
02:09 PM
Adobe Photoshop Version: 20.0.4 windows 10 im hesitant to reset things just yet, because i made some setup changes a while back to improve performance for art and i cant remember what they were, i dont think these settings would have caused this problem though
... View more
‎Jun 03, 2019
01:44 PM
when drawing with a hard brush, the edges appear soft when i use the bucket fill tool i can see a 'halo' around the edges where it meets the soft line. any ideas? is this normal?
... View more
Copyright © 2025 Adobe. All rights reserved.
AdChoices