Adobe Acrobat Sign

When some of my colleagues send out documents to sign the window below doesn’t show up and we need to painfully delegate each document: Could please someone help us with this?BestDavid

I am sending documents for signature but do not want the receiver to sign until the next day (or contract will be void). Is there a way to add a condition in the document which they can only read the contents, but not sign? 

Acrobat Pro DC is stuck when uploading documents at 72% after clicking "Specify where to sign" in the office for all laptops. There are lots of people encountering the same issue and regarding to one of the posts - https://community.adobe.com/t5/adobe-sign-discussions/quot-specify-where-to-sign-quot-gets-to-72-then-fails/m-p/12324444#M16915) - which mentioned about licence issue. But it cannot apply to my case as I am able to use the online version (https://documentcloud.adobe.com/) as a workaround. Is it possible that it is related to network issues? Because there are quite a lot of restriction in my company environment.  Any suggestions are highly appreciated.  Thanks. 

There are 4 ways to sign a document, can I turn off the "type" option?

Hi,I dont have the option to change the language of the email that I sent to the signer in adobe sign.I dont have it in the account options and where I fill to send the document.Can you help me? 

Hi, ich habe bei der Erstellung eines Workflows das Problem, dass der Name der Gruppe manuell eingegeben werden muss. Ist es möglich dies schon irgendwo im Workflow vorzugeben? Der Workflow sieht bisher so aus:Unter E-Mail sind alle Empfänger der Gruppe hintereinander aufgeführt. Das ist also nicht das Problem. Ich hätte einfach gern, dass der bereits vorgegebene Gruppenname automatisch in dem Feld landet, welches im ersten Screenshot die Fehlermeldung auswirft.Ist das irgendwie möglich?Danke für die Hilfe vorab.

I am new to adobe sign and this has been quite more difficult than I would have liked or was expecting.  I'm sending bulk messages using a CSV upload.  I've already read through the tutorials on everything and have even spoken to/ had someone virtually man my pc to figure out this error.  It does not occur all of the time, but at least half the time I have an error message saying that my "bulk send messges require an email recipient".  My field to pull this data is accurate and I also have emails listed as per the sample CSV file.  Messing with it today I was able to save a file and upload.  When I added more data (did not delete a single thing) it gave me this error message.  I was also able to upload a file but after I resized the rows (not changing an data at all) it gave me this error message.  This has happened (seemingly at random and far too often) throughout the past couple of weeks of trying to get this set up as needed.  Any help i

Has the AdobeSign specification changed? Is it needed to install AdobeAcobat Pro to use?User who has AdobeSign lisence suddunnly had not been able to use AdobeSign on AcrobatReader.After innstalled AcrobatPro, AdobeSign woked.But another user still can use it on AcrobatReader.Does anyone know about this?

I need to send an application to 50 people. In each application the name and address needs to be prefilled for each specific person.So each prefilled name and address is different and specific to the individual signing. I have figured out how to send a prefilled document to one person and how to send it to multiple people in bulk, but I'm only able to prefill the document once - meaning the fields can't be specific/unique to the signer. I've been trying to figure out how to do this for hours and I've found a few support articles like this, but my Adobe sign doesn't look like this or give me the option to import recipients and merge fields from file. Do I not have the correct type of account for this? Or what amn I missing?

cześćUtworzyłęm szablon wielokrotnego użytku , gdy wchodzę do zakłądki Zarządzaj i Szablony, mój szablon jest dostępny, jednak gdy chcę wysłać dokument do podpisania pojawia się problem:1. wprowadzam dane uczestników 2. załaczam dokument (pdf)3. uruchamiam "Dalej", pojawia się przetwarzanie4. pojawia się mój dokument w którym chce wykorzystać pola z własnego szablonu5. własny szablon próbuje zaimpletentować z "szablony pola" jednak nie jest on tam widocznyco jest tego przyczyną ? Czy musze go gdzieś najpierw opublikować ? Status szablony jest "aktywny"   

So I have created a fillable form that I am hoping to send out to my clients to fill out and sign via the fill and sign piece. I have been testing it out myself before I launch it to my clients. When I open the form that is sent through the fill and sign app, when I type in the fields on my mobile phone, the words show up too large for the fields when trying to fill it out. However, once I complete the form and it is returned back with a signature, everything looks fine when I receive it back. My problem is when you are filling it out on your mobile phone, you can't really read what you have typed in some fields because they appear really large, and too big for the fields. However, when I fill it out on a computer it is fine. The settings for these fields that i set when i built the fillable form were set to modest font sizes that would accomodate the fields. I need this to be a seamless, simple process for my clients who are not overly tech savvy. Most will complete this for

HI, is it possible to send multiple pdfs to the same people for signing, without them merging into one pdf?  I need to keep them separate while still being able to send them all at once, not one by one. 

Good Morning! I sent out a document for signatures, I need them including time stamp. Three of the four signatures were as expected underlined and with a date and time below. One signature was without time stamp. How can I get a correct signature from this user instead of the date-less one? It must be something, he needs to set up or cancel. Help would be very welcome.

It has been a while since I have made a template but in the past, i was able to link fields so that certain fields were only available if a checkbox was checked. I was also able to have tow checkboxes and link so that one of the two needed to be checked any idea where those options are now

If I set a document up for sequential and sent it out for signatures but now need parallel, can I change it after the fact? If not, my option seems to delete and add a new document.ThanksDerek

Cuando envío a firma un documento, se le envía una copia, y quisiera saber si existe una opcion para no enviar copi de documentos firmado. Saludos,

Hey Guys, Im a Allround IT worker in a school with in total 9000 students and 700 teachers. I want Adobe sign to send from a specefic shared email, and also recieved in the mailbox of the shared-email. but im logged in with my personal account.  IS this possible?

I'm getting this error message after I add a recipients email address to a document to sign.  I click the button to proceed and this error message pops up. I am not a developer, and not trying to do anything other than request a signature. Any assistance would be appreciated.

I've just set up Adobe Sign solutions for enterprise for our business. I'm now starting to add users. The problem is that a number of our directors and managers already have an Adobe account. So when I add them as a user in Adobe Sign they end up with two different accounts. This creates a lot of confusion! Is there any way of adding a user's exisiting Adobe account to our Adobe Sign? Or is there a handy user guide for switching between accounts? Thanks!

I have groups set up in Adobe Sign. I need group admins to be able to see all documents sent using those templates by group members. I thought I saw how to do this at one time but cannot find this now. Can someone help me out?

Hello Adobe,I can no longer delete draft forms from the "shared for signature" management console page. When I select a draft form the only option I have now is "hide." The forms that end up in the draft section (for me anyways) are forms that I've processed incorrectly. I'd really rather have the option to delete them if possible. Why "hide" them if they serve no purpose to me? Please put the delete option back. Thank you.

I have a number of, multiple-page documents. Each document requires that all pages are initialed.I do not wish to have to go to each page to initial. That is hours of time required to complete this task.I see that Adobe sign sets up the INITIAL fields.But it does not support initialing once and that being carried into the later pages.If correct, this means that the Adobe Sign function is of little assistance, for this circumstance. Please confirm that Adobe Sign does not support the 'flow down' initialing of multiple-page documents. Is there some tool that assists this workflow?

Can anyone tell me how to access the 'Reports Experience" feature outlined in the following article? https://helpx.adobe.com/au/sign/using/adobesign-advanced-reporting.html?jarvisData=%7B%22versionPath%22%3A%222.55.13%22%2C%22cookieGuid%22%3A%22NA%22%2C%22customData%22%3A%7B%22cookiesEnabled%22%3Atrue%2C%22analyticsServerEnv%22%3A%22%22%7D%7D#

Hi,  I am new to Acrobat (obviously) and I sent a document out for signatures, it needed 8 signatures which I got and the document was finally returned to me but now its encrypted and I can't get back into it, it says it password protected (I didn't set up) but does not give me an option to enter a password nor will it allow me to change the password settings.  I am using the same pc / software the document was created on so not sure why it won't let me access it as I am the author.  I went thru other forum questions but couldn't find any answers.  Help anyone???

Hello, Adobe Sign is integrated in dynamics 365, a document template has been built in dynamics 365 and works perfectly fine pulling data from different parts of the system.  I can't figure out how to use this template in the Adobe Sign integration and add this in the agreement template.  The only workaround I can think of is saving the merged document on a desktop and then adding it back in again when ready to send for signature but that seems to be a long way round.  I'd welcome any suggestions? Thank you!