Adobe Media Encoder

Most recent Media Encoder AI will not load. Sometimes it takes 5 or 6 tries before it will load. Each time I receive "The program is not responding". I have uninstalled and reinstalled and still, the problem exists. I have uninstalled ME AI and reverted to the non-AI version and still, "The program is not responding". Watching it load it stops on various commands so I can not pinpoint the specific instruction. When I can get it to run the Dynamic Link function seems to take forever and sometimes the program will freeze.   I have the latest Windows 10 update (12/12/2023). I am running 32GB RAM on a 1TB M.2 drive. Intel Core i9-9900K CPU @ 3.60GHz. Internet connection CAT6 1GB fiber Internet. My graphics card is an MSI RTX 3060 Ventus 3X 12GB OC. This has been happening fairly regularly since Windows 10 update in late November or early December 2023. Is anyone else experiencing this challenge? Premier, Audition, & Photoshop (all AI versions) run without a problem.

I was rendering Animated Gifs without any issues, and then all of a sudden they are rendering twice when using Media Encoder. I was first redering from Premiere and my first version of the gif came out fine. I made some small edits on the timeline and then rendered again. Now for some reason when it renders, the Gif has the video twice. I checked the timeline and the output settings in Media Encoder, but I can't see any settings i may have accidently changed. As a test, I went to After Effects and created a simple 10 second comp with text moving around. When I rendered to an Animated Gif again, I still get the same issue. So this tells me that it is somthing to do with Media Encoder. All of my Adobe Apps are updated to 2023 latests. Are there any settings i am missing that is causing this? The attached files were my work-in-progress renders I made:Ships v01.gif: Is the first WIP test I did and rendered fineShips v02.gif: Is what is happening now (I edited the video a bit

Media Encoder hangs when encoding ProRes LT that has been sent to it from Premiere. I've never had a problem before I got the Studio Ultra. My previous system was a 2017 iMac. It'll encode for a few minutes then stop and the "remaining time" indicator ticks up into the hours. ME doesn't freeze, it just hangs up. Mac StudioM2 Ultra64GB 

Hi guys, I am currently trying to write a script in vscode using the ExtendScript extension. I have successfully connected to AME, confirmed by sending through an alert. Every time I try to run the sample code from this guide: https://ame-scripting.docsforadobe.dev/guide/index.html I am getting an error in my code , see the picture attached. I am posting here hoping someone can push me in the right direction.AME Version 22.1.1 (Build 25)Windows 11 22H2 

Whenever I batch  export sequences from Premiere through Media Encoder, the defeault source range is always "custom". It doesn't matter how many times I manually change it to "entire sequence".  There are no selections on my timeline, nothing is highlighted, I have zero in/out points.  Is there a way to set the default source  range to "entire sequence" or am I going to be stuck doing this manually forever? 

Hi, I experience a slow exporting or rendering in Adobe Media Encoder after i update it to 2023.when i render the After effects project to Media Encoder it takes hours or more to be done,but when i render it in After effects it only takes minutes.I didn't experience this kind of issue in version 2021 of Adobe Media Encoder.

Over 5min in to rendering a 11min clip in 1080 and not even 10% of the way through... EXTREMELY slow renderring. Both AME & in Premiere using the latest versions.... (unable to share files unfortunately)

    You have access to exclusive discounts with your Creative Cloud membership Discover a wide range of unique member-only discounts, offers, and experiences handpicked to help streamline your creative workflow.   Starting this week, you’ll find a wide range of exclusive third-party discounts, offers, and experiences from brands like HP, Dropbox, Skillshare and more—all included in your Creative Cloud membership. This allows you to learn a new skill, upgrade your hardware, boost your productivity, get inspiration, or reset your mind to be more creative.   Learn more  

Hi guys, i use after effects cc 2021 but recently i accidentally unstalled my media encoder cc 2021. So i tried to look up on my creative cloud the same version and i couldn't find it, now i cant render my videos with media encoder because the (2023,2022) versions don't work How can i solve this? Thanks.

Another problem in this long list of Media Encoder Issues.I have been trying for hours to render a Premiere Pro project which has multiple After FX dynamic links (intro, lower thirds, outtro etc.). I'm on Windows 11, Dell XPS 8940, Intel i9-10900 3.70 GHz, latest version of all apps, NVidia GForce RTX 2060 graphics, fast SSD drives and 32 Gb of RAM.The sequence won't render from AME (or direct from PP for that matter) and stops on the first frame (as far as I can tell) after the openning After FX intro.I tried everything - Playback engine settings in all types, replacing video files, updating drivers, uninstalling and reinstalling the software, clearinbg caches, swapping drives, removing effects, rendering to a different drives, disabling parallel encoding and I even sang a Christmas song to Adobe Premiere in 5 different languages.All to no avail UNTIL...I pre-rendered the After FX intro to a QuickTime file (it has to have an alpha channel at the end) and boom, it worked.So on the hand

All apps are all updated 2020 versions.All apps are installed in the same folder.Premiere Pro CC 2020 will not queue media to AME through File -> Export -> Media -> QueueAfter Effects CC 2020 will not connect with AME when rendering through AMEPP and AE also cannot communicate when I replace media with AE composition.  Possible cause of problem:Deleted creative cloud apps folders from C drive then moved default installation to my other drive. All apps installed fine and are all working except for dynamic link. I have tried the following:Uninstalled all apps again - Did not workUninstalled AME then reinstalled - Did not work Temporary workaround:In AME I did:File -> Add Premiere Pro Sequence/AE Composition and AME successfully added them to the queue. Thoughts? Should I do a clean installation of the entire creative cloud app? How do I do that?    

My System:Windows 11i9 13900K (24 core)128 Gigs of RAM (4000+ hz)EVGA FTW 3090 (24 Gig VRAM)M.2 across the board (working/rendering on separate drives)My Issue:I'm rendering a high-settings video (60 VRB, 2 pass at 4K). Yes, this is a lot, but my machine should handle it. Yet, while rendering on software only, my machine is using only 15 to 20 percent CPU and no GPU. When I switch to GPU acceleration, I'm still using roughly 15 eprcent CPU, but only 10 to 15 percent GPU.What's wrong here, and how do I fix it?Thank you so much. 

I would like to Save/Export my Media Encoder custom workspace to an external file so that in the case of a catastrophic crash, I can restore/import the custom workspace and be back up and running faster.Is this possible?

I have the latest version of Adobe media encoder installed and have had the same problem for over a year now.  I do a lot of computer screen recordings that do not have a video camera feed and or just presentation based.  No matter what CBR settings I I try in Adobe media encoder, the final export always seems to be variable and significantly lower than the chosen data rate. If I use CBR for a video camera recording, the output is still variable according to media info but the data rate is a lot closer to what I choose in Adobe media encoder.  I feel like I Adobe media encoder is still doing some variable bit rate analysis to screen based only recordings for some reason. Any thoughts or suggestions would be greatly appreciated.

When exporting from Premiere (23.4.0) to Encoder (23.5) the exported files don't use each sequence name but keep on using the same name of an old sequence (that was exported in the past). Any idea why this happens (it happens in -at least- a couple of projects), am I missing something?.

I am rendering a GIF out of After Effects, it hangs when it gets to the very end. Weirdly it still plays the file even if I stopped it in the encoder. But I feel like this would somehow corrupt the file. (I'm not super technical I'm more of an artworker, so may be wrong). FYI MP4 worked, it was the Animated GIF that caused an issue. Can anyone suggest a solution please? 

Hi,Since updating to Media Encoder 23.5 I'm having trouble connecting to Dynamic Link server.I tried everything I could find in this community but nothing seems to solve the issue.Uninstalling and downgrading ME and AE, resetting and deleting cache and preference files, checking and unchecking different settings in AE... I'm running ME 23.6 right now on an Apple iMac running macOS Venturea 13.5.1I also have to manually drop my comps into ME for them to show up in the list.Using 'File > Export > Export To Media Encoder Queue' doesn't do anything. Same for the workaround by adding the composition to AE Render Queue and clicking 'Queue in AME'.I didn't have these issues before 23.5 but downgrading to 23.4 doesn't help either.Hope someone has a solution here...

I have 1000s of video files with stereo-audio.Now I need to merge each of these files with a new wav-file with 5.1 surround-audio track. These files have same name as the original file with an extension.Output should be the original video file with stereo-audio (audio channel 1-2) + 5.1 surround (audio channel 3-8).Is it possible to batch this workflow in Adobe Media Encoder? As an alternative, I will need to transcode the original files with stereo-audio to files with 8 channel audio where the original stereo-audio will be mapped to audio channel 1-2. The empty channels 3-8 will be filled out by the software which create the new 5.1 surround mix.

Hello, Premiere ExtendScript API has an API to use AME to render a sequence from a project - app.encoder.encodeFile(filePath, outputPath, presetPath, workArea, removeUponCompletion).As its fourth parameter, it takes a "workArea" which can be ENCODE_IN_TO_OUT, meaning the AME should render the part that is between the in and out points set on the sequence in the Premiere project. This in and out point of the sequence is also automatically honoured when dropping the prproj file to a watch folder that AME is configured to watch. Now I am looking for a similar option in the AME ExtendScript API - app.getExporter().exportItem(source, destination, preset).But I could not find it. As a result, the sequence in my prproj file is being rendered in full instead of only the part between in and out points.I noticed a different method (exportSequence) which accepts leadingFramesToTrim/trailingFramesToTrim but it does not look like there is any easy way to get those frame numbers from

Hello!I am having an issue with one of my videos not rendering correctly. For instance in Preimer Pro it looks fine:Then when it starts to render and completes:I am not sure what is going on. The original recorded video is just fine from what I can tell. Same scene from the unedited video. Any help would be greatly appreciated as I have no clue how to fix this. Further more the clips I add for the opening and closing render just fine, so its narrowed down to just the edited video part...I hope I am making sense. Anyways thanks for the help in advance. 

I cannot export my AE composition straight to AME; AME will open but my comp won't be there. I can, however, add my comp to the AE render queue and then send it to the AME render queue from there, and it shows up, but when I try to render it in AME or adjust render settings it pops up as a Dynamic Link Server Connection failure and then it tells me "Could not read from source. Please check the settings and try again."  I have the 2020 AE and AME; and funnily enough what does work is rendering it in AE into a .mov, then uploading that .mov into the AME queue from AME, then it'll render and go into an .mp4. However, making it a .mov takes away some quality and so I'd like to avoid that if possible! Any help would be appreciated; I've already tried the instructions from most tutorial posts on here and they don't work! 😞

Adobe Media encoder plugin is missing in After Effects. How do you install the plugin?

Hi!In third-party application's documentation i found next sentences :"Starting with AME 11.1.2.35, the Adobe Media Encoder can be installed as a Windows Service. This service should be running at all times on the central AME machine. See Adobe documentation on how to install Adobe Media Encoder as a Windows service."But i couldn't find any information about it.How i can do it ?

When encoding, my Media Encoder 2024.0.3 regularly gets stuck between 90-100% when rendering - just never continues or closes off the file. I have experienced the same problem with earlier versions of ME as well.If I press "Stop Queue", right-click the job and select "Reset Status", it usually renders the file completely. It just seems totally arbitrary and a bit annoying, specially when rendering an entire list of compositions and it get stuck on one of the first. Anyone with the same problems? System: Intel i9 13900, 64 GB memory, nVidia Quadro A2000, fully updated Windows 11, display drivers and Adobe-programs and 500 GB free SDD-space at primary drive and 800 on my project drive.

My question is, does Media Encoder not support expresion controls>point control for MOGRT (created with aftereffects)? Or is it a bug? MOGRT created in aftereffects 2024 and used in Premiere Pro 2024.It resets when rendering with Media Encoder. [Information to be reset]Position information linked to point control No problem when rendering in Premiere Pro.