Adobe Media Encoder

When I send projects from After Effects into Media Encoder they usually render quite quickly, in a few hours at most.For some reason, videos over 20 minutes are taking over 40 hours to render. This didn't used to happen.Why is this happening?

Hello! I am trying to combine two Zoom meeting recording clips together.Clip 1 is about 40MB (1280x742, 25fps, 312kbps bitrate, 12min42sec) h.264 / mp4Clip 2 is about 150 MB (1440x812, 25fps, 546kbps bitrate, 30min10sec) h.264 / mp4I am having trouble when I create a sequence in Premiere with the same settings as the first file that is just a combination of both clips. When I render out the final file is a huge 950MB. Final Clip: is about 950MB (1280x742, 25fpx, 2797kbps bitrate, 42min26sec) I am trying to encode the clip with the same settings but at 500 kbps bitrate, but for whatever reason media encoder seems to be ignoring me and going with 2797kbps bitrate.  Do you know what the best settings are to encode this video so it is a more reasonable size?Why do you think it would be basically ignore my wish to do a 1 pass encode at 500 kbps?Is there a bitrate lower limit for the profile and level or resolution?What are better settings to use?Most of the foo

Hello,In anticipation of difficulties in supplying companies with electricity during the winter in France, I would like to program Adobe Media Encoder so that exports are activated at night. Thus the power consumption will be lower.In the preferences, I'm stuck at 120 minutes. It's too short compared to my working hours. I would have liked 360 minutes to be sure it was at least 10 p.m. I can't place my orders at 8 p.m.So I'm looking for a trick, a script or a Windows command that would automate the automatic start of the queue at a specific time.I think this option could interest many people because when the media is not urgent, it is absurd to encode at the same time as one works on other projects and thus use the resources (and the electrical consumption) whereas the encodings can be spread over time over a calmer period (at night).Thank you for your help,Nina, video editor for television.

Since updateng from 2020 to 2021 our h264 exports have had audio issues in the quicktime player. It will play in the beginning but will go out of sync over time. Skipping forward in a video either stops the audio or throws it completely out of sync. We have tried a whole range of export settings for both the audio and video, turned off hardware accelaration, exported directly from premiere but nothing seems to effect the issue. Videos play fine in other players and videos we exported prior to updating play fine in quicktime. 

Help!! All ouputted files from AME, Premiere and After Effects freeze for the final 3-4 seconds. To be clear, they render fine but the outputed file is the problem. I've updated to the most recent updates for all apps but it's still not working. Any help would be appriecated

in workspace, instead of changing the export preset for each file one by one manually, how do I change it once across all files or apply a default to all files? I want to use a custom preset I saved on all files that I drag in to export

Desde que atualizei o Media Encoder para a versão 22.0, não consigo renderizar mais nada. Fica nessa tela ai e não sai disso! Alguém com o mesmo problema?

I have a lot of sequences, some 1x1, some 4x5 and some 9x16.For some reason, when queueing all of them to media encoder by selecting the sequences in the project panel and going export media it looks like it doesn't export it properly.Step 1:Step 2, clicking "match source":Previews are fine:(4x5)(1x1)I suspect there's something wrong with metadata.. because the files don't show a thumbnail on macos.And using Switch to view these files metadata:1x1 reads as 9x16, which was the last one that I was able to export succesfully after closing media encoder and premiereThe 4x5 does the same.There's something going on, because after a Media Encoder restart I can export fine one non 16x9 aspect ratio. Then the other queued exports get the same resolution as the one that was first exported successfully.Premiere v 22.6.2 build 2Media encoder 22.6 build 65Mac Air M1 OSX 12.5

Hi I've been having this problems since both apps have updated recently I can't seem to render my After Effect project on Media encoder, when I try to Export-Add to Adobe Media Encoder the App will open but not queue... As there is no way to export a low res version directly on AE how I can I fix this bug?

Hey i have a problem with exportation ME with code erreur  -1609629695How i can fixe that please  Thanks

Hi, We've developed the AME panel take the encoding job from our desktop app(Mac/Windows) and process it as @Bruce Bullis advised last year.It's really helpful.We would like to thank Dan too. Unfortunately, Our panel has two problems sometimes(one is major, and another is minor).Firstly, under the situation like below output's audio mapping doesn't work correctly. Let me explain the situation the problem occurs. versions:# AME 15.4.1(build 5) inputs: #video1 (XD4C.MXF)XDCAM HD422 MXF, 4 x mono audio #video2 (XD8C.MXF)XDCAM HD422 MXF, 8 x mono audio presets(The forum can't accept .epr files, so they're attacted as .docx):#preset1 (Apple ProRes 422 LT_4CH.epr)for 4 x mono audio input(#video1)#preset2 (Apple ProRes 422 LT_8CH.epr)for 8 x mono audio input(#video2) the situation :1. Our desktop app sends #video1/#preset1 info to the panel  and the panel runs the code below    csLib.evalScript(`app.getFrontend().addFileToB

Has anyone seen a bad white balance on export in Media Encoder when Premiere Pro exports colors just fine? I've looked at all export settings and I can't figure it out.

I'm using a 16-inch 2019 Macbook Pro on its highest specs, running on Catalina and I have just updated AE and ME to the 2022 version. However, ever since I updated, Media Encoder just does NOT want to work. I have a project due TODAY and every time I try to render it gets stuck on "Connecting to Project":  This has been going on for 30 minutes. Every time I try to close the app and reopen it again, the project won't export, then I try to do the queue in AME from AE, but it gets stuck again. WHAT is going on? My career literally depends on this and now its stuck and I have no workaround. GET. IT. FIXED. ADOBE. Your software are incredibly NOT inexpensive so this SHOULD NOT have been a problem. Smh.

So  I tried to export something using RG Trapcode. I wanted to render it in AME, but when it's finished rendering, what's in the video is just saying my RGT is unlicensed. So then, i checked the plug-in in MAXON App. and  it is licensed properly and such. So i tried to just render it straight in AE, and it worked just fine. But it took much more time to render. what's going on?

I have stopped using Media Encoder because of audio issues (among other things). Even after I realized the LUT problem -- when you add LUTs or any effects to premiere or AE: if you don't add them to media encoder, they will not show up in ME unless you add them to those folders, too -- I ALSO had audio issues. The worst offenses were CLIENTS saying the sound wasn't right.For instance, a recent build (recent meaning 2020?) resulted in audio mixes with odd results in ME as opposed to a PREMIERE encode -- audio keyframes and transitions aren't registering. A build directly from Premiere sounds better than a build from ME. I don't know who's in charge of making sure Premiere and Media Encoder want to pork each other like a couple of randy teens, but you better figure out who let themselves go, because this sucks. 

When transcoding from 3840 x 2160 to 3840 x 3840 i get this error.  It won't fill the 1:1 frame but instead it takes the 16:9 format and shrinks it into a 1:1 frame.  I am also seeing this error coming from other companies that submit animation to my team.  So I know this is an issue that multiple teams and people are dealing with. 

I can't seem to select anything other than MXF as container type. I don't want this, I want to create MOV files. Can I do this, and if so, how? Thanks!

My AME is not taking up for rendering when triggered from After Effects. Please help. Using MacOs

Every time I try sending the project to Medica Encoder from the Premiere export menu it will not do anything and go back to the project timeline. How can I solve the issue?

I understand scripting for Adobe Media Encoder is not supported and/but I still try to find a way to boost my workflow and output. With my script (CEP) I add an After Effects comp (Dynamic Link) to the AME Queue. I can start the Queue, and I can get track of the progress of the item. So far everything goes smooth. // works function addToQueue(myProject, myFormat, myPreset, myGUID, myDestination){ queueItem = app.getFrontend().addDLToBatch(myProject, myFormat, myPreset, myGUID, myDestination); queueItem.onEncodeProgress = function(progress){ // keeps track of progress 0 to 100 } } If I run this function multiple times, multiple items are added to the Queue. When I start the Queue I would wish to see the progress per item. But I only get track of the last item. All the previous ones render normally but give 0 as progress, finally the last item gives 0 to 100. When I try this, it adds both items, but only tracks the last added item.queueItem = app.getFrontend().addD

Hi Everyone,I have a MacPro (trashcan model), and when I render to h264 using premiere or media-encoder it cuts off the final second or so of footage. No errors. Just a file which is missing the final second or 2. If I use my PC on the same file, it renders perfectly well. any help appreciated.  

Hi,Since this latest update I'm experiencing incredibly slow rendering times. I've never experienced this before since I've been using this program. I have just aborted a 1 minute AE sequence that said (attached screenshot) 18 hours, I've let it render for over 9 hours now and it still displayed a further 12 hours to go. The animation was not that heavy and the only third party plug-in I used was Video Co-Pilot 'Twitch'. However, when I used an older version of AME 14.9, it rendered out the sequence within a few hours, but would not include the 'Twitch' effect on certain layers, and overlay graphics. This is really frustrating now. I have two systems, both running Windows 10 (Up to date). A Predator Helious 300 32Gb Memory, and my other main system, specs:-Windows 10 Processor Intel(R) Core(TM) i7-10875H CPU @ 2.30GHz 2.30 GHz Installed RAM 32.0 GB (31.8 GB usable) NVIDA Geforce RTX 2070 Wondering if anyone else is experiencing this and if there is a problem? Suggestions?&nbs

Bonjour,J'aimerais savoir pourquoi sur des projets sensiblement les même (sur Première Pro) encoder peux mettre parfois quelques minutes pour faire la conversion d'un projet en vidéo et sur un autre projet sensiblement le même (à 2/3 images près et 2/3 effets près) ça peut durer plusieurs dizaines de minutes.Hier tous les projets sortaient en 5 minutes et ce matin ça dure super longtemps. Entre temps j'ai bien sûr éteint le pc hier soir et je l'ai rallumé ce matin Merci d'avance

Bonjour, Media Ecoder me dit une erreur s'est produite et doit fermer -  le code de référence 205quoi faire ? merci la communauté 

Hello ! J'ai un petit problème sur media encoder. Lorsque que je fais sur after effect composition / ajouter à la file d'attente de media encoderMedia encoder s'ouvre mais le fichier n'apparaît pas sur media encoder . J'ai fait les MAJ, j'ai éteind mon ordi et je l'ai rallumer mais rien n'y fait je n'ai pas de fichier qui apparaît dans le logiciel 😕😕 J'espère que quelqu'un pourra m'aider ! 😇 Je vous remercie d'avance, Amel merzouk