Adobe Media Encoder

I'm having a real doozy of a problem, and of course it's happening a couple of days before I have to send in a bunch of deliverables... On my current project, whenever I try to output anything, Media Encoder quickly uses up all my dedicated GPU memory, at which point it basically stops rendering. If I'm sending out multiple smaller outputs, each one eats up a chunk of GPU memory, and then the next one eats up another chunk - i.e. the usage increases step by step, instead of going up for one output, then down when that's finished, and up again for the next. The only way I can clear the GPU memory back to zero is to quit Media Encoder (and After Effects), so I pretty much can't queue up more than one output at a time - overnight batch renders are definitely out. Any thoughts? It's driving me a little crazy at this point. Switching to software-only in Media Encoder doesn't seem to help. One possibility: I'm working with ArriRaw footage - any bugs around that? We're in finis

I've created a lower third template on After Effects to use it on premiere pro, so I can change the name, etc. But when I send it to Media Econder, the effects that I put on the lower third (a neon effect) does not render on the video, just the forms of the lower third. But when I export on premiere pro the video come out just fine.

Hey everybody, I've been exporting video's in H.264 with NVENC Hardware Encoding for a couple years now, and it always has been working fine. But since today it suddenly doesn't work anymore. I've tried anything, I've updated my Nvidia-drivers to both the Game Ready and Studio Drivers, I've installed an earlier version of Premiere Pro and Media Encoder etc. etc. but nothing works. My hardware is:AMD Ryzen 9 5900XNvidia GeForce RTX 2080 Super32GB DDR4 RAMSamsung 990 Pro SSD And my encoder settings are:H.2643840x2160p 25fpsProgressiveVBR 1-Pass (35 Mbps target with 45Mbps max) Look, It's never been asn issue, and now when I wanna export a video with the exact same settings it suddenly doesn't work anymore, and I've also tried on other videos which I previously rendered. Now they suddenly don't. Even more curiously. For some reason, when I wanna export an After Effects-project with those settings in After Effects it does work, but than when I wanna use Media Encod

Adobe Animate/Adobe Media Encoder Headache :   So on a Mac running Monterey, Media Encoder 25 is incompatible. There are no older versions listed for download.   On a Mac running Sequoia Adobe Animate (Formally Flash) is also incompatible, even if Media Encoder works...THEY NEED TO WORK TOGETHER.  Animate/Flash is not even listed as a compatible programe "with bugs" as some others are, that's how unuseable it is on Sequoia.  So Adobe, we're paying for this legacy laggard .  Would you like to give me back access to a compatible version of Media encoder, since, you know. We're paying for it?

I am having a problem with Media Encoder 2025. I tried to redering my video and it gave me the following error I tried a second time and the same thing happened. Export ErrorError compiling movie. Accelerated Renderer Error Unable to produce frame. Writing with exporter: H.264Writing to file: D:\ΒΙΝΤΕΟ SONY CANON\My child.mp4Writing file type: H264Around timecode: 00:00:00:09Rendering at offset: 0,000 secondsComponent: H.264 of type ExporterSelector: 9Error code: -1609629695

IssueWhen exporting a 59.49 timeline to 29,97 the  source range indicator wrongly suggests i have only part of my timeline selected. See attached screenshot.Adobe Media Encoder version number: 251 (Build 65)Operating system: Windows 11 v.10.0.26100.1Steps to reproduceExport a 59.49 timeline to 29,97 have no in and outputs in the timeline.Perhaps add a second outputExpected result Source range indicator indicates complete timeline is selected for exportActual resultSource range indicator indicates part of the timeline is selected for export

Media encoder is not installed on my device and even upon reinstalling and uninstalling this popup will still appear at random even if Creative Cloud is completely closed and it is not in use at all. I have tried signing out, repairing creative cloud and installing the version it seems to be stuck on (v.26.4.4) but this issue persists even after completely restarting my computer. No matter which option i press it continues to reappear and open the entirety of Creative Clourd Desktop at random.   

After updating my Premiere and Media Encoder, now when I send to Media Encoder to export, the captions disappear in Media Encoder.  I have "Burn Captions" checked and everything and it still doesn't work.

I keep getting this error message (amecommand Initilization error 1), when I try to render a video in Photoshop & Photoshop Beta, both the newest versions.I uninstalled and reinstalled Photoshop, Bridge & Media Encoder, but still doing the same thing. I restarted laptop (macbook pro), restarted the apps, uninistalled the apps then did a laptop restart before reinstalling, and still.. no luck.   I tried to open Bridge to render through there, but Bridge keeps force quitting before it even fully loads the app, so that's of no use. Older versions of Photoshop and Bridge did not work either and produced the same out come (photoshop still gives error message when renderinig video and Bridge force quits when app is is loading up)An Adobe employee responded with this since I originally posted in the Photoshop forum: "When you work in Photoshop, it is just sending the file over the Media Encoder. The error you are seeing is telling us that Media Encoder is no respon

Últimamente Media Encoder no hace más que causarme problemas, pareciera que de forma aleatoria decide renderizar con la CPU en lugar de la GPU. Si renderizo dentro de Premiere, veo en el administrador de tareas que se usa en su mayoria la GPU y el renderizado es rápido. Si renderizo EXACTAMENTE EL MISMO PROYECTO dentro de Media Encoder la mayoría de las veces renderiza usando 100% del CPU y tarda mucho, pero mucho más tiempo. Entonces esa respuesta que leo en todos lados de que "ciertos efectos usan gpu y otros no" no tiene nada que ver. El mismo proyecto pasa de durar 1 hora de renderizado en Premiere a durar casi 6 horas dentro de Media Encoder.

Hi there, Here's what I'm doing:  I have a 4k video of someone talking to camera, so to add variation, I zoom in and out to different fixed positions. (I.e. scale to 100%, to 120% and 140%).  To make things easier for me, I set up different adjustment layers with a transform effect on them (on source) and scale to taste so I can then drop them on the timeline whenever I need to. I name them accordingly, "camera 1", "camera 2", etc... When I render via Premiere, things look all right:  But when I render using Media Encoder, the issue appears:  Media Encoder seems to be scaling from the upper corner of the videos instead of from the center of the videos... So I don't know if it's a bug nor what might be causing the issue. Do any of you have an idea why this might be happening? I'm using Windows 10, the version of Me is 25.1 (Build 65) and Pr is 25.1.0 (Build 73) Best,Mauro.

I do not often use Me and I had no idea this software is so ridiculously slow. Now that I'm looking at the elapsed and estimated times this gives me the impression that Media Encoder does not ustilize CUDA or uses the e-cores of my Intel CPU alone. This is my 48 minutes long project and after I started rendering the video, shows there's 10 (TEN!) hours left to finish. What is wrong with this software? The CUDA is activated, I tried making Me window active - the estimated time does not change at all. My CPU is 50% loaded, my graphics card is barely loaded though I'm rendering out into HEVC-h265.In comparison Premiere Pro rendered the same project out in ONE HOUR yesterday, though it's window was not active - I was watching Youtube during the whole rendering process.   I think there's a bug in it... Adobe, please see to it.Win10 updated, RTX 4080 with 551.61 and an NVIDIA fix driver, i7 13700 KF, 64 Gb, SSD.Premiere Pro 24.2.1, Media Encoder 24.2.1

Hi. I am using AE 2025 and ME 2025 on Windows 10. I was noticing some drops in image quality when rendering in After Effects so I decided to attempt using Media Encoder instead. At first my video seemed pristine once it finished rendering, but upon taking a closer listen, I notice that around the midpoint there is some clicking and popping at certain instances, like you might hear from a dirty or worn vinyl record, or from audio that seeps too much "into the red," aka clipping. As the video goes on this seems to be more frequent of an issue. (Note, these sounds are perhaps not easily noticeable to the average listener, but at louder volumes or perhaps on a second listen it is probably noticeable. Given that the audio for this project is music, this is rather unoptimal. More or less rubbish even still.) This is very upsetting, after waiting a fair amount of time for the video to finally render, after having to restart to fix some issues on my end. However, I am fully confident

i have ame 25.0 installed but the creative cloud not showing the update to 25.1 . i go online and the update says my computer is not compatabile

Every time I'm sending a .aep to a render queue, and then hit play button in AME, I have an issue - 'File doesn't match the source'. Though it cannot apply to the real situation, as all my files is located in one folder and the path in AME definitely matches the real source file path.I use Adobe Media Encoder Version 23.2.1. Build 2.After Effects 23.1.0, Build 83.MacOS BigSur.Please, consider the issue. 

I discovered that my conflict between Premiere Pro and Media Encoder was due to versions. When I updated Premiere Pro to 25, it exported to Media Encoder 25 with no problems. Hmm. Sometimes the simple answers are the right ones.  Go figure. 

Use the template below to provide us with information: Issue - Media Encoder no longer encodes audio in the preset for Youtube 4K videos. Audio is checked in the project, but no sound comes out.Adobe Media Encoder version number - 24.5Operating system - Windows 11Steps to reproduce - A media project that plays fine in the latest version of Premiere along with audio does not encode audio with the video in the final render. Expected result - Audio should be rendered with videoActual result -  Video renders but no audio on output. No warnings shown during render. FIX: Revert to Media Encoder v 24.4.1 Build 2 and same project encodes both audio and video fine. Optional but useful: upload media and/or project files, screenshots or screen recordings that demonstrate the issue.  - No relevant screen shots as this fails silently (no pun intended), and project files are too big to share. Also to note - this is the second bug I have 'obtaine

Issue - A sequence that plays properly in Adobe Premiere Pro does not render properly in Media Encoder. It will not render audio when rendering video to H264 using any of the rendering methods or audio settings. It will, however, render the audio if the sequence is rendered to audio only, for example to MP3 or AAC audio. Adobe Media Encoder version number - 25.0, however this has also been the case with previous Adobe Media Encoder versions since about last May. I had a separate bug report for previous versions but it was never repaired. I continued to use the older version. With the 25.0 upgrade to Premiere, and the lack of backwards support to previous Premiere versions of Premiere files, and this still being a problem, I was forced to figure out what the issue was with many trial and error attempts or completely re-edit my video. Operating system - Windows 11 Pro. System is dual processor Intel Xeon Gold 6184 @ 2.4 GHz, 128 GB of RAM. Rendering is on a quad SSD d

Adobe Media Encoder ( Version 25.0 Build 54) appears to be writing exclusively to RAM rather than to any of my drives.With 128 GB of RAM, I encounter crashes during the export of large projects as Media Encoder fills the RAM to capacity. Monitoring drive activity reveals high levels of read activity but no corresponding write activity. Towards the end of some of the exports that are being rendered , I noticed very high write speeds from Media Ecoder on any of the SSDs I try to write to but the ram values don't go down and the containers are never closed.  My SSDs are more than capable at writing at speeds much faster than the program can render at.  Why can’t Adobe's software just work?    Windows 10 Pro 64bit - 22H2  OS Build 19045.5198AMD 2950x 128GB Ram at 2667mhz3x 2TB Samsung 970 NVMe , Scratch, Cache, OS 2x Nvidia 2080 SuperNvidia Studio Driver Version 566.14   

 

I'm trying to export a bunch of sequences in premiere through Media Encoder. The videos are the result of digitalizing UMATIC & BETA tapes so they have some frames that are potentially corrupted. When exporting, the queue shows a lot of videos marked as 'Error'. The message I get is something like:- Archivo de origen: /var/folders/f7/49nn33vn3y5gbn0l9jwgrtkw0000gn/T/11-14 copia_1_88.prproj- Archivo de salida: /Volumes/E 2TB 002/Exports/Bons/FU–66152.mp4- Ajuste preestablecido utilizado:- Vídeo: 768x576 (1,0), 18 fps, Progresivo, 100 (63% HLG, 51% PQ), Codificación de hardware, 00:00:49:03- Audio: AAC, 320 Kbps, 48 kHz, Estéreo- Velocidad de bits: VBR, pase 1, Destino 2.12 Mbps- Tiempo de codificación: 00:00:1512/03/2024 12:04:53 AM : Error de codificación------------------------------------------------------------Se ha producido un error al recuperar el fotograma 148 (00:00:07:08) del archivo /Volumes/E 2TB 002/11-14/FU–66152.mp4. Se va a sustituir el fotograma 147. For all th

Media encoder is importing .jpg image sequences as a single frame even when "import image sequence" is toggled on in the import dialog box. This works fine with in Media Encoder Beta, but the official build is broken. In the official build, the only workaround is to manually select all the files in the folder (rather than just the first file of the sequence which normally works). This is tedious as the "cmd-a" command doesn't work in the dialog box to allow selecting all files... The problem exists with .jpg sequences... .png appear to work. I didn't try other formats.

 I need to export all the clips in a sequence seaparatley. I can't use project manager because it doesn't apply certain effects to the clips.  I've opted to create a bin with all the clips from my sequence. From there i export them to the media encoder. The problem is by default media encoder sets the suorce range to "Entire Clip" and I have to manually change each export to "Clip In/Out". It won't let me bulk change this export setting and it's not possible through a preset.  This has been posted about many times, is there any workaround, if not can Adobe please provide a better way to export all the clips on your timeline individually. Media Encoder Version 25.0

The latest versions of PPro and AME just constantly show as needing to be updated. Then it takes a full audio plugin scan when opening and then Creative Cloud shows that they need to be updated, again and again and again and again and again and again ...

Hallo ich habe ein Problem.Die UI den Media Encoders v25.0 zerlegt sich von alleine, ausgehend vom Font der UI selbst.OS: Win10 Pro 22H2 19045.5131Media Encoder Version 25.0Die UI beginnt sich zu zerlegen sobald ich den Render Button drücke.Ich habe verschiedene Versionen getestet.Das Produkt kompeltt deinstalliert und neu aufgesetzt.Kein Erfolg.