Adobe Media Encoder

ma vidéo after effects n'apparait pas dans media encoder, ça fait 4 heures que j'essai. Des idées ?

I recently changed my GPU (from 1650S to 3070) and now Media Encoder does not export any video. I have cleared the caches for both Media Encoder and PPro, and I have reinstalled both apps.I am using the standard H264 option but keep getting this error. I am on all latest drivers (and did a clean install of the studio Nvidia drivers). When I try to export the sequence through PPro, it works properly but with Media Encoder it stops and errors out at the exact same time. My video has an intro + main video content + outro. The error happens right at the beginning of the main video content. I have tried exporting the intro and main video content separately, and those were exported without any error; it is only when I export the combined sequence that Media Encoder simply does not work. Everything worked fine with the old card. Here's the error: Export ErrorError compiling movie. Render Error Render returned error. Writing with exporter: H.264Writing to fil

Hello, I'm looking for a way to compress 1000's of video files in the .mp4 format, which is simple enough in a straight forward drag and drop. However, as these files are all part of premiere projects, I need the folder structures and names of the files to stay the same. All I want is for the file to be compressed and written over in the same location, with no addition to the filename, no new folder, just a simple compress and replace.  I've tried to do this in Adobe Media Encoder - is this possible? I know I have done it in the past, but it now seems impossible. Any help and direction are gratefully received.  Thank you

Hello everyone! The Problem: I updated to the latest versions of Adobe CC products yesterday, only to find that I cannot render from After Effects as I normally did – when I go to "File > Export > Add to Adobe Media Encoder Queue" absolutely nothing happens. When I drag a comp from AE to AME, AME gets stuck on "Connecting to Dynamic Link Server..." and won't proceed.Does anyone have any suggestions as to what may have happened during the update to break AME's connection to the Dynamic Link Server? My system: 27-inch, Mid 2011 iMac2.7 GHz Intel Core i516GB RAMSierra 10.12.4Software:After Effects 2017.2 Release, Version 14.2.0.198Adobe Media Encoder 2017.1 Release, Build 11.1.0.170 Troubleshooting Steps Taken:1. As I mentioned, both After Effects and AME are the latest updates, I've checked several times. It's bothersome to me that I have the 2017.2 version of AE and the 2017.1 version of AME, but that appears to be the latest versions of both. 2. I uninstalled AME, manually moved

Hello, I am using Adobe Animate 2022When exporting a video, choose               The clarity of the images and the design are weak when issuedBut the quality appears poorplease help (^_^)I want the video in mp4 version 

I use After effects 2022, and Media encoder 2022,but when i try to add my video to media encoder queue,it doesent show up in media encoder,and when it does show up,its stuck at connecting to project or connecting to dynamic link server or something. and if i try rendering my video inside after effects it crashes my after effects,what should i do?

Hola.Tengo la suscripcion total y cuando termino de ditar un video en after effects y lo pongo a la cola de media encoder no ocurre nada. No llega a conectarse con dynamic link. En internet no encuentro soluciones gracias.

I was asked to convert a 10 second ad to Jodel, which requires less than 5 mb file size for the ads. I tried with ME, but even though I finally lowered bitrate to 0,5 Mbps (mp4, H.264, AAC 96kHz) I could not get smaller file size than about 20 mb. Then I took Handbrake, which made 5 mb file with about 5 Mbps bitrate. What settings did I miss in ME, how can I get smaller file size with it?

Bonjour, Où peut-on télécharger la mise à jour 22.6 ? Merci

le logiciel d'authoring ENCORE peut il maintenant enregistrer un blueray en 1080p ?

Soy usuario de la licencia recientemente, luego de instalarlosal abrir cualquiera de los proyectos, realizo previsualización y comienzan a aparecer errores que antes no había, paso a exportar en AME, configuro en H.264 (mov) y cuando doy aceptar la exportación tiene muchas fallas.Comencé a exportarlos en cola de procesamiento y también aparecieron fallas en las exportaciones.Funcionaba bien con la versión 2019. Al bajar la versión de prueba AE 2022 tuve que actualizar el plugin Element a la versión 2.2.2 ya que mis proyectos tienen elementos en 3D. Logrado ese paso comenzaron a aparecer fallas en todos los proyectos al exportarlos. 

Bonjour, Je rencontre des difficultés au niveau de mes exports sur Adode Media Encoder. Voici mon setup : - Dell XPS 15 9520- Windows 11 Famille- Intel Core i7-12700H 2300MHz 14 coeurs 12ème génération- NVIDIA GeForce RTX 3050 Ti Laptop GPU- 32GB RAM DDR5 4800 MHz- SSD NVMe 1To Versions :- Media Encoder 15.4.5 Paramètres export :- Accélération rendu GPU CUDA- H264- 1080x720 ou 852x480- Encodage matériel Lorsque je lance un export d'une vidéo d'1min30 (250mb), celui-ci dure entre 1h30 et 5h. Le CPU ne tourne pas au delà de 30%. Le même export sur un HP Omen avec 32GB RAM DDR4 2666MHz, i5-8300H 8ème génération 8 coeurs et une NVIDIA Geforce GTX 1060 met entre 30 minutes et 1h et le CPU tourne en moyenne à 90% lors de celui-ci. Auriez-vous une piste pour résoudre ce problème ? Merci d'avance !

Hi, I converted a DNxHR 444 12 bits to a DNxHR HQX. Same resolution, same fps. It tooks 7 minutes with a 3080Ti (cuda enabled). Then I tried to encode from the same file to the same location with DaVinci Resolve Studio and it tooks less than 2 minutes. It seems DNxHR is the only codec where DaVinci Studio is really faster than Premiere Pro / Media Encoder. Is there a reason ? Am I missing something ? Thank you

Good day! I am using Media Encoder to pull framegrabs from a .MOV file. How is it pulling/exporting the framegrabs, one per second? How do I change that? Is it going by the frame rate or something else? How do I set it so that Media Encoder pulls/exports a frame every 5 or 10 seconds instead? Great tool but it's giving me tens of thousands of images... Any advice would be appreciated! Thank you and have a great day!  

Olá, tenho um AMD FX-8320 e uma GPU Nvidia GTX 960 2GB Ao tentar renderizar os videos através do Adobe Media Encoder, quando clico no start simplesmente não acontece nada, como está no print em anexo, quando eu mando exportar diretamente pelo Premiere, funciona normalmente, usando aceleração por hardware (CUDA), no Encoder independente de selecionar aceleração por hardware ou software, o processo fica parado.

Hi all. Question: Can any Adobe app extract sections of video at the file level rather than by decoding and re-encoding? Details: When preparing video for a project, I like to extract clips from much larger video files so that they don't take up much space. (It's not always possible to link to files so I need separate copies.) Currently, I can do this using FFMPEG, but, being a command-line program, it's not very convenient. Having said that, it works by simply copying the required data blocks into a new container file, so it's lightning-fast and it preserves the exact original quality (obviously). I'm wondering, therefore, if the same is possible in an Adobe app. Thanks in advance.

I just updated Media Encoder to v22.5 from v22.x(sorry, I forgot), and now, after importing the footage I will create proxies for them (Prores Low/Medium Proxy). Proxy creation took too long and Media Encoder after creating a file in the Queue tab, will "not responding" for about 10-20 seconds to create another proxy file. Because I have a lot of footage, this takes me a lot of time compared to creating proxies in previous projects in previous versions. 😫So I tried downgrading Media Encoder and Premiere Pro to v22.2 and boom, it created proxies like a breeze. 😆I've been reading discussions about v22.5 and have seen quite a few other silly bugs, so I hope Adobe takes care of its products. Thanks. 😎

Hello,  I recently shot a short on the Sony FX6. I shot 4k DCI with s-log 3 and the s.gamut3.cine color and ei profiles. When I convert the mxf files to prores 422 for the editing process the saturation and contrast blow up. I have read that the 2022 versions of Me and Pr have this issue of reating s-log as an HDR file, is there a fix to this in Me?

Es imposible exportar una composicion de After effects a AME , he desinstalado e instalado tanto after como ame varias veces, he probado versiones anteriores, 2 o 3 videos que he visto por internet pero nada...   veo que hay mas gente con el problema a raiz de la actualizacion de 2022. si intento importar desde AME un proyecto de After  me dice que no puede conectar con el proyecto