After Effects

Bonjour à tous ! Je suis actuellement en train de travailler sur une animation after affect, mais je rencontre un problème.Lors de l'importation de mes fichiers Illustrator, un me complique la tâche.Pour les importer je fais Fichiers > Importer > Fichiers > Je selectionne mon fichier > Avant le cliquer sur importer je change "Importer sous" en mettant "Compositions - Garder la taille des calque" et aussi "créer une compositions".Pour tous mes fichiers illustrator ça fonctionne nickel, sauf pour un "enfant 6". La composition fais environ 0.10s, quand j'entre dans la composition impossible de changer la taille du calque car en fait ce n'est pas un calque mais on dirait des icônes de JPG mais indiqué en .ai Je comprend rien, aidez moi svp !Merci d'avance !

I've got a comp that is 23.976. I'm trying to slip my "Work" comp one frame from frame 1000 to 1001. I make a "set attribute>start time" block set to The problem is that I get nothing. The frame seems to be just a fraction beyond frame 1001. When I click the In Frame of my Work Comp and hit Ok with 1001. I get exactly the expected result. I'm guessing that this is a conversion between time and frames. I really wish I could "Set Time In" as frames rather than time, but I seem unable to do so. Any input would be appreciated. Thank you as always.

Bonjour,Existe-t-il un moyen (avec ou sans pluggin) de réaliser un nuage de phrases dans After Effects ? J'ai testé plusieurs solutions (y compris gratuites en ligne) qui permettent de réaliser des nuages de mots mais jamais de phrases.Merci d'avance si vous pouvez m'aider...!

Cant seem to get the audio to go past the blue line? How can I resize the boundaries, without resizing or messing with the audio spectrum circle?

I've created a perfect cube using 6 3D solid layers in After Effects. Everything looks fine when using the 'Cinema 4D' and 'Advanced 3D' renderers, but when I switch to the 'Classic 3D' renderer, I start seeing artifacts around the edges of the cube. (See attached images: first two are fine, last one shows the artifacts).Has anyone encountered this issue before? Any tips on how to fix the artifacts in 'Classic 3D'? Thanks in advance.

 When I bought a CC off youtube, i tried to drag it into my adjustment layer and it says this. Can anyone help ?

The Burst Pop effect isn't animating for me and it's driving me crazy. I know I can recreate the effect by hand, but it would save me a bunch of time if I could just use the effect. When I drop the effect into an empty composition, keyframes appear under the new shape layer and the "Burst Animate" values change when I move the playhead over them, but the actual shape stays the same. I'm stuck with a static burst. In addition, when I make adjustments to the value or add keyframes to the "Burst Animate" effect control, nothing happens.All other effect controls (that don't affect the animation) seem to be working as intended, except for "Burst Stroke Width" randomly, which also does nothing.I went into all of the expressions under the different effect controls and noticed a couple errors. Specifically, error icons appear next to "Burst Stroke", "Trim Burst" start & end, and "Transform: Shape Pop Burst" - however I'm not familiar enough with expressions to understand what the prob

I'm working on rotoscoping a 6-second 1080p video. To optimize performance and avoid triggering propagation at the start of the clip when making adjustments, I’ve been splitting the video into 37-frame sections.However, I’m running into a couple of issues with this workflow: 1. Roto Brush Misalignment Between Sections: Since each section has its own Roto Brush calculation, the brushes don’t align seamlessly between sections, causing a noticeable jump when playing through the clip 2. Propagation Issues in Split Sections: After rotobrushing the first section and splitting the video (Shift + Ctrl + D), the last frame’s Roto Brush from the first section appears in the second section. However, propagation still starts from frame 0 in the new section. If I delete the strokes in the second section to stop propagation, it also removes the necessary Roto Brush data, making it impossible to align the two sections properly. Has anyone encountered this problem, and if so, do you kno

After applying the effect to a text layer and removing the animation slider keyframes, the blinking effect stops disappears. The workaround would be to leave a single keyframe at 100. Reason I want to remove the keyframes is to add an opacity fade on as opposed to typed on and keeping the blinking cursor. Is this a glitch or intended?

I have a general question about optimizing expressions using posterizeTime(0) & valueAtTime(0). While I use valueAtTime(0) often, I recently learned about the posterizeTime(0) update in AFX 16.0 (https://helpx.adobe.com/after-effects/using/legacy-and-extend-script-engine.html#freezing-property-values). At first glance, posterizeTime(0) seems like it could be a game-changer for speeding up complex expressions that only need to be computed once in the comp / project. I'd love to hear from others about their experience using posterizeTime(0) and how it has / hasn't helped improve workflow. Also, how does using valueAtTime(0) with posterizeTime(0) work together?For example:Comp_1 has a complex expression that uses posterizeTime(0)Comp_2 references the Comp_1 expressionIn Comp_2, will using valueAtTime(0) when referencing the Comp_1 expression help / hurt / make no difference for performance?Thanks all.

I can't seem to find this answer anywhere so it may not be possible but I'm wondering if you can change the ruler measurement setting to percentage in After Effects? I'm not talking about the timeline ruler, which is what comes up the most on a search.

¿Como se accede al historial en After Effects?   Title edited by Mod.

Por algum motivo, o after effects após a última atualização não aceita mais/não reproduz nenhum tipo de animação de arquivos GLB já animados, na versão anterior isso continua funcionando normalmente, mas hoje, após atualizar, o after simplesmente se nega a abrir a janela de opções de animações de qualquer arquivo glb animado.Eu testei não só com um arquivo, mas com 49 arquivos glb, apenas para ter certeza que isso é de fato um problema do software e não dos arquivos utilizados, em contra partida, desatualizei o software para a versão anterior e as animações podem ser selecionadas tranquilamente... Eu não sei se isso é um problema apenas meu, mas preciso que isso seja solucionado o quanto antes, é impossível fazer trabalhos com glb animados SE não é possível justamente selecionar a opção de ANIMAÇÃO glb... Aguardo ansiosamente uma solução para este problema que sinceramente parece algo ridiculamente simples de se resolver.

This has been hit and miss. I am now consistenly getting a dynamic link server connection trying to use Track camera in After Effects.64GB RANWindows 7 proffesional i7 processorNVIDIA GEFORCE TITAN I have enabled all the recommended programs through my firewall. I see the dynamiclink server is running in my task manager, I have closed all other programs, no antivirus, I have restarted my computer, no luck with this.Also to add additional information: It seems that when I try to do replace with After Effects composition in Premiere Pro I am getting error: The importer reported a generic error and also when I first launch After effects I am getting a failure to load a few plugins from CineForm including importer

how to creates this video effectsI've been searching for 3 days and I can't find any tutorials Anyone can tell me how to make this. Anyone with a tutorial video address is goodplease help 

Is anybody know how to resolve this problem?

Hello,We're trying to make After Effect detect the config.ocio file associated with a given project by setting the OCIO environment variable. We can't make it work however.We are using  version 24.0.3 on Windows 10 Enterprise and we've tried setting OCIO both in the user and in the machine scope (cf. screenshot below). Can After Effects detect the config.ocio file via the OCIO environment variable?If yes, do you have any clue about what we are doing wrong?Thanks for your help,Rodrigo 

my composition screen is black and does not open the discarded file in any way what can I do please help   Title edited by Mod.

   Hi everyone,I’m working on a personal project and importing my Illustrator file to AE.As you can see, I am trying to merge all the groups from group 1 to group 13 using the MERGE PATH tool in the content add property However, after I added the merge path, all my shapes blended into one block of shape instead of the original design. I’m not sure if this has to do with the order of the group or something else. Appreciate anybody’s help on this in advance!

Hi!I'm very new to trapcode particular, so this might be an easy fix, or impossible! I'm trying to animate some light streaks in a wavy shape. I want the ends of the wave to be thicker, and the middle to taper down, as if it's a light trail that rotates. The problem that I keep having is that whenever I either change the size of the particle (streaklet), or if I use a custom made sprite shape and rotate it, the lines become choppy. I've increased the particles/sec, and it was smooth before I tampered with the size or rotation. I've chosen a point light as emitter type. Is there any way to fix this? Getting desperate, and I would be eternally grateful for any help! 

Tody, out of nothing, AE showed 3 kinds kinds of errors. layer doen not have a source (26 :: 335)unknown exeption on frame 0 on Warp stabalizer (1) (25 :: 16)Ae warning: Get Dimensions: Layer Source is Null forcing dimensions to 1,1 (26::0) I can't open the project anymore.. I can import it, and i see allthe stuff inside but when i click on a picture file it shows a black image and when i load a project it gets one of the messages. I think it has something to do with broken paths, but i can't reconnect the files as wel. And i can't safe it t a new place or collect files to a new place.... It's probably somthing in the metadata... Anyone?? 

Hi, I'll try my best to explain myself here.I currently have an animation of a Shape Layer using two keyframes controlling the width of the the shape from 0 px to 100 px.Now what I want to do is to have the second keyframe value be controlled by an expression (so I can link it & make it "dynamic") WHILE retaining the animation curves (velocity) from my predefined keyframes. Is this at all possible? In my mind it seems pretty basic as I just want to change the value of a specific keyframe while retaining the timing and speed of the predefined keyframes.All I've seen are solutions where they replace the whole animation with some default ease or linear curve. It's crucial for me here to retain the predefined animation.I'm thinking a solution would be as simple as this in the expression window:key(2).value = [x, y]; //where I then would be able to set x to sourceRectAtTime().width of a specific objectThanks in advance!

I have updated to the latest AE version 24.3.0. Worked on blender to create 3D objects and import to AE. I save them in .glb format, and when I drag it to the timeline the object does not appear, it is just black on the screen. Although the controllers appear but the object seems invisible. I have tried everything, I don't have the trapcode plug-in and I don't have any others. I don't know if I'm doing something wrong or it's a bug, does anyone have a solution?

I selected "quicktime" as format for exporting my prpject, but after rendering I cannot see any image. Can anyone help me on the rendering process?Thanks.

It looks like a simple line that is twisted and then wrapped aound a sphere. But I have no idea wherer to start  – should I start with a circle and twist that? Or start with a simple line, twist that and then wrap around a sphere? https://uk.pinterest.com/pin/746753181962983180/ Twisting circle