Audition

Hello people As the title says: I've got a Roland Cakewalk UA25-EX soundcard that has ASIO drivers, but when i choose ASIO in Audition it shows the card as "not working". Using Windows 10 latest version. I'd appreciate any clues as to what could be wrong. Thanks in advance for any help. RegardsD.

Hello,  I'm currently working on editing an interview between a guest and a host. I have the files on two separate tracks because one guest's mic was picking up echo and was really bad, so I couldn't just use the synced session file (ugh.)  ANYWAYS, I was working on cutting some tape down, and went into Waveform to cut it because I find it way easier to cut audio in Waveform than Multitrack. BUT when I came out of cutting, the Multitrack was now entirely out of sync—huge portions had gone missing in the guest track, and they had all become out of time within the host track.  I tried to restore to a backup, but even older backups are now completely lost because they're still trying to pull their files from the now edited waveform. Is there any way I can undo what I've done so I can get everything back in line? I really don't want to go through and chop it all up again!

Experienced with audition, but haven't used it to record for a long time.I just got an AKG P420, which is plugged into a Mackie 2x2 audio interface. I'm using the ASIO drivers and I've tried enabling forced settings. I've made sure all the levels are 100% in the settings panel for the interface, as well as windows device settings.When I record audio the track has no treble. This is visible in the waveform - bass and low-mid frequencies seem unaffected.Aside from the USB cable connected to the PC, the audio interface has both a headphone jack output and a line output. I've monitored both of these whilst recording and the signal comes through perfectly clear from both outputs - so either the PC/Audition is interfering, or there is something broken in the audio interface itself, after the signal is processed but before it is sent back through the USB cable.I haven't been able to find any similar issue in the forums, to know if there is any Audition setting which commonly affects this

A few years ago I bought a third party plug-in, I can't find the plug-in in any of my emails, and I couldn't do the data transfer from the old computer to the new one. Is there a way to locate the file inside the Audition folder so I can copy it and paste it on the new computer?

Hi all. I use templates for the daily podcast I produce. My workflow is, I open the template, add one of the new files from the new episode, and Save As to save the session under a different name. Sometimes, when I click on Ok, a prompt asking if I want to create a new folder under the same name I'm saving the session. However, I create that folder before I even open the template as to organize my stuff and have it all in the correct place. If I click ok, a new folder with the same name is created and the session is saved within that folder. My solution to this is to close everything, transfer the new saved session to the folder I've created and then reopen Audition. The issue goes away.However, how do I avoid that "create new folder" prompt in the first place? This has happened with all the versions of Adobe Audition I've had. My macOS is also up to date.

Ya actualicé el programa y pude cambiarlo a español, pero me siguen apareciendo algunas palabras en otro idioma.

I just got a new computer and am having an issue with recording in audition. I have tried all the audio hardware settings posts I could find, but can't figure it out. The only way I can get audition to record is to turn on "listen to this device" on the windows record settings. I don't have to do this for windows voice record, just Audition. I appreciate your help.

Hi All,Posted this in Premier Forum but suggested I also post here for insight from the Audio guys. 🙂--------Looking for an external control console for audio control in Premier. I purchased a Presonus Fader Port 8, they say its compatable.  Got the faders to respond and sync with premier, recording level keyframes and such - though it seems I have to reset the control console prefernences evertime in Premier, also the "Bank" feature to get to tracks beyond the 8th doesn't seem to work.  I've seen videos of people doing it and I think I got everthing set, what am I missing?  Presonus tech support no help. Any suggestions for a solution that does work with Premiere.  Don't need anything fancy, really just fader control (I like physical control panels over having to use a mouse when mixing multiple tracks. 🙂   adusenb@kdsproductions.com   -- Thanks Adam

Every time I close and reopen a multitrack file the auto-ducking gets all messed up. Most of the time it won't show the auto-ducking line at all and nothing I do in terms of clearing or resetting the audio type will change it. But sometimes its even weirder, showing visually that it's ducking but the sound not actually fading or other strange combinations like you can see in the video. 

Adobe Audition CS6 will randomly need to be signed back in with the account associated with the license. This product is not a subscription based product and was a one-time license purchase. There should be no reason to be forced to sign in when the product is licensed with a key. Also upon signing in, it will ask for 2FA to allow the log in. The account does NOT have 2FA turned on and should not be asking for such. 

Hola a quien corresponda tengo en uso el adobe Audition 3.0 y no sé cómo agrgar o buscar informacion del archivo de audio, de antemano gracias equipo

Hi there, I am a new(ish) content creator, and purchased the Rode Nt1 and AI1 as a recommendation from another creator and close family member. Today is my first day getting set up. I am running the newest version of Audition, Windows 11, and I have a Samsung Galaxy Book 2 Pro, as my setup. I am a techie, and I know my computer should be able to handle what I am going to throw at it. I had it working perfectly, after being on the phone with tech support for Rode for about an hour. I needed an update of some kind, and it threw my settings out of whack and I have *zero* idea what got changed and what didn't change. The system including my interface, mic and headphones work perfectly, and everything, but the computer will not recognize my mic, in order to get my levels tested, so I can record. Any help would be greatly appreciated, and tips and tricks are also welcome.Thanks! capsgirl90

I am using Audition 14.4.3.4 on my Mac Mini 2018 running Mac OS Mojave, and I am not getting any audio output from my MOTU M4. Audio outputs from Audition tot he computer's on-board audio just fine, and other apps on this system output audio on the M4 without issue. Where do I start in troubleshooting this? Thank you.

Hello - I am audio mixing / mastering my piece in 5.1.  I have a single project with multiple sequences representing different scenes.  I am now at the stage of combining those sequences into a master sequence. For each sequence I optimized the audio using a combination of clip and track effect/treatments along with defining the surround sound stage for that sequence. I obviously prefer track treatments since they are more uniform and faster to apply and there's no other way to apply 5.1 sound stage effects other than on the track. However, when I pull the sequence into the new "master" sequence (like literally click and drag sequence to the timeline) I lose all the track-level audio treatments.  I am missing a step, I am sure.  How do I combine all the sweet audio goodness from each seqence so it is retained when placed in the master sequence?  I have been searching for some sort of 'mix down' feature in Premeire but can't find it. &nb

Hello - I wish to mix the audio of my Premiere Sequence in Audition. I choose Edit -> Edit in Adobe Audition ->Sequence. I select the following parameters in the screenshot below:When it transfers to Audition it does seem to take a while for a sequence which is about 3:30 and then I am greeted with this message: However, if I choose a clip from this same sequence and edit it in Audition everything works quickly and properly. I have get this same warning/error with the other seqences in the project.It does seem to be isolated to this PROJECT, however.  I don't get the error on sequences in OTHER projects.   

I have a timelin with a lot of clips. To adjust the volume I have used the mixer and I see the resulting level adjustments on the "show envelope" feature. When I move the clips to the right, the adjustments does not follow the clips, making alle the adjustments wrong. How can I solve this problem?URGENT best wisheskll

It is a stupid question, but anyhow:I used to have tools like zoom in the timelin at the bootom of my timeline screen. Now they are gone, how dot I get them back? Thanks in advancekll

Hello, I am facing an export issue in audition and would need more clarification into if it is actually normal or if I need to change something. THE PROBLEMI just finished work on Foley for a movie project and am trying to export the individual tracks to send to the Sound Mixer. The exported files, however, are pretty large and are all the same size even though some tracks have less recorded audio and little to no processing. STEPS TAKEN SO FARI have tried using multiple options such as:  Time selection to export Selecting clips on each track to export To test, I tried exporting the entire session (as a single file) and it was 2.28 GB in size. Exactly the same size as each individual track. FYI  Little to no effects were applied on audio files. Processing like Pitch shifting, EQ and automation was done sparingly Stock Sound Library audio files were used on occasion MOVIE AND SETTINGS INFORMATION 1. The running time o

Please help! When mapping inputs for my interface, I only see the option for 2 inputs, when there are 4 available on the interface....two mono instrument, and two line inputs. BUT no matter what inputs I select I cannot get any audio to come out in my session. Anyone else have this difficulty? What am I missing.

Hi,When i export my sequence from Premiere to Audition (latest versions of both) each clip in the time line as the effect "amplify" added with +9db, and each clips volume is raised to +9db.  Anyone knows what is going on?  Drives me nuts to change it back everytime. Is there also any way to reset every clip and not have to go in to each individual?

I used to be able to extract audio from *.wtv files using Audition 1.5, but, following a computer crash and reinstallation of both win OS and Audition 1.5, can no longer do so. What am I missing? I've installed DirectX. Is there a codec I need to install? All assistance welcome!

Please note: I apologize for any misuse of terminology, I'm very new to this. Hi all, So, outside of recording a few voiceovers, and guitar tracks for things; Audition is fairly new software to me, so I have a question about/could use some advice on what I'm trying to do here.Background: I built a 16-channel mobile recording rig that I could easily carry around to rehearsal and live sessions for the purpose of demoing songs, and live video with better sound. This is the aforementioned beast: The extent to which we've used it so far has been two overhead drum mics, a single guitar mic, and a single room mic with a separate mixer feeding the guitar into our IEMs. I realized that we should (theoretically) be able to use the Audition mixer to live monitor everything we're recording when we're finally mic'd up and live demoing, so I embarked on the journey of figuring that out and this is as far as I got using the Audition resources Adobe has on it's site. I wa

Hello All, I seem to have lost access to the "Audio Gain" knob in the Edit View in Audobe Aution 3.  We have several versions of AA3 at our radio group, and this functionality is available in the other versions of the software.  We are currently running identical versions in each of our production rooms, but I don't have the "Audio Gain" functionality in one of our rooms.  I seem to remember running into this years ago, and it's a setting/checkbox to add it.  Please help!  It is so much easier than "normalizing" each of rogue transients!Thank You!Gainless in Alabama,

I'm using Audition 2023In multitrack, when I try to insert a file, Audition says that the 'the sample rate of the inserted file does not match the sample rate of the session'.As far as I can tell, the sample rate is the same as the multitrack session.So why am I being forced to save a copy of a file to the same sample rate as the original???

Hello Forum! I would like to know if it is possible to export sample data from Adobe Audition to a spreadsheet (Excel). For example, take a few cycles from a sine wave and export the corresponding sample data to Excel in order to graph the sine wave there. Any help is much appreciated. Thanks!