Audition

I'm using a Neumann TLM 102 microphone with a Zoom H4N connected via USB to my iMac running the latest version of Adobe Audition (CC 2021). Even though my Limiter is checked for Vocals in my Zoom H4n (which should prevent my audio from clipping) my audio is in fact clipping when I record it directly into Audition. The recording level on my H4N is set to 75. Could it be that when recording directly into Audition, the Limiter on my Zoom H4N is being bypassed? Just trying to figure out what I'm doing wrong or what I'm missing. In terms of my speaking style, I'm speaking close to the TLM102 (about 1 inch away) to get that proximity effect. But it shouldn't be causing any distortion/clipping if the Limiter on my H4N is on. Thanks in advance for any help or feedback with this.  

When recording multichannel via Mac, I see several options (shown below). In Windows, I'm only seeing 01M and 02M. Has anyone seen this problem? How can I restore the multichannel options on Windows? Thanks in advance for your help.

Hello all,There used to be two buttons for waveform and multi-track view button in the upper-left hand corner of my edit window, above the files bucket (see attached). Now they've gone and I can't seem to get them back. I've also lost the little icons for trim, razor, etc. It seems to be some kind of view setting that has changed, but nothing that I've done in view seems to bring themm back. Can anyone assist? Many thanks!-Adam 

I'm very new to this program, so it's possible I'm missing something obvious, but I followed all of the steps needed to make this work but nothing's happening on any of my recording software. I created a multitrack, added effects to a specific track, set it to my audio input and output devices, and primed it for recording, but nothing's working. All of the guides, including the official one, says it should work by then but I'm still stuck. Thanks for the help. Edit: I tried mapping a Virtual audio cable to the output, no change.

Wenn ich das Metronom verwende, wie verhindere ich das es auf die Aufnahme kommt?

remove dialogue from audio?

I'm hoping someone at Adobe will see this. I'm curious about some added functionality to Adobe Audition. I work in radio and was happy to see that Adobe Audition had functionality for Wide Orbit Radio Automation Metadata. By this I mean, Artist, Title, Intro and EOM information could be saved in the wav form and then read by Wide Orbit automation - thereby saving millions of radio people the extra step of having to enter this information manually in Wide Orbit's file system.I'm not working for Humana as their Senior Radio Station Consultant. Yes, we have a radio station! We use APEX and DIGILINK by Arrakis Systems and I'm curious if it would be possible to include the same metadata functionality Wide Orbit has in Adobe Audition, but for APEX/DIGILINK as well?

Hi, I'm running the latest Pr 22.0.0. and Audition 22.0.0.96 on a PC, AMD Ryzen 7 2700X Eight-Core Processor 3.70 GHz, 32GB RAM, NVIDIA GEForce RTX 2070 with the latest graphic drivers. Since doing the latest update to 2022 I am getting random general errors when right-clicking a clip in Premiere and selecting 'Edit clip in Adobe Audition'. This first started happening with GoPro footage so I thought this was specific to those clips, but it turns out it is happening completely randomly on my GH5 and Sony A7C footage as well. When I say 'random', I just managed to edited my first clip without issue, moved onto the next clip and this error occurs.  I have never seen this before and have never had problems with any of my footage from any of my cameras before. The files are not corrupt as they open and play OK within Premiere and other apps. I have already re-installed Audition but since there is no error code to look into, I am at a loss as to what to do next. Any tips

Hello,I've just finished editing an interview in Audition (see attached clip). Just straight cuts and some gain adjustments. I want to distribute it on CD but I'm not sure what should be done to improve it or to raise the volume to a good even level. Should I first apply a hard limiter and then normalise the sound? If so, what settings to use? What are the standard settings for a CD containing speech? How loud should it be? Any other suggestions would be gratefully accepted. Thank you.

Hi, I have recorded some mono audio (voice) but somehow merging does not work. I have succesfully used merging earlier, but now when I have two clips (adjacent and on the same track) and Merge them the merged track is empty / no audio anymore. Does anyone know how I can solve this and make Merge work again?

HelloHad a power outage and when I opened Audition to record I am all of a sudden getting these 1 second interval Track markers that is causing an overall lag in recording between Track 1 and Track 2. I have a attached an image of the problem. Thanks

I download MPEG-4 audio only files from Zoom recordings, the only format available. Unfortunately my job's approved audio editing software cannot import MPEG-4, only WAV and AIFF. MPEG-4 is not listed as a supported file format: Find supported import formats for Adobe Audition CC It's not on thye list but IT wanted me to check to see if there is a workaround for MP4 as it is an encapsulation format. (IT strongly prefers I use Audition over rival software.) I did not find any posts in this community that specifically answesred this query. Any help or assistance you can provide would be greatly appreciated. 

I have a PC running Windows 10, 8 gigs of ram, Adobe CC.  I have a Rode NT-1 Microphone and an AI-1 interface. I'm using WASAPI.  I have updated the firmware and downloaded the most current drivers from Rode. In the waveform editor, when I press record the transport moves but no sound is being recorded and there is no wave form. The microphone is working and I hear my voice through my headphones.  Playback works on already recorded audio.I'm a total beginner at home recording. However, I got lucky and everything was working when I first set it up. Then I tried to change the interface to ASIO which didn't work.  Any help would be much appreciated.

Is it possible to make the above clip a bit transparent in clip overlay so I can see trough. This has been possible in Soundtrack Pro. This feature makes it very easy to ajust beats of two clips exactly.

My multitrack recording stops recording after about 30 min but the crezy thing is that the playhead keeps going. I looks like it is still recording but it is not leaving a waveform. The record button is still pressed and if I stop the recording it processng the tracks and makes it look as if I stopped the recording.  

プレミアプロとAuditionそれぞれ2022を使用しています。Auditionでノイズリダクションしたあと、Auditionを保存すると、ローカルに保存されたものと元の動画のオーディオとありますが、元の動画のオーディオもAuditionののリダクションは反映されてるんでしょうか？リダクションが弱くてわかりづらくて…。初歩的な質問で申し訳ございませんが、よろしくお願いします。

We want to create music all styles but especially EDM, so i'm wondering if AUdition was a good choice for music editing?

Presently running CS6 on OS X El Capitan 10.11.6. An OS upgrade is required as this is an older MacBook Pro.Will CS6 run on a newer Mac OS? Thank you

I can not find a way to put text annotations in a track or clip in Audition. I would find it handy to have a way to put a large text anotation, fixed to a point in the recording, in either a clip or a track. Ideally, the notation would be fixed such that it would move with the indicated point if the clip is stretched, etc. See attached .jpg image for a mockup of what I hve in mind.

Hello,I just install a new version of my adobe audition. Unfortunately, all the workstation is black , like a night mode. I've found the place to change the colors of the waves but not the menu. Is it possible to do this please? If it is, how can I do please?It was possible before so I hope...

Hi, I have recorded my wifes podcast using two usb mics (rhode ntusb and t-bone sc 420). I'm using ASIO4ALL driver to enable two usb mic recording. I told her I could produce her first show, watched lots of youtube videos and did testing and everything went fine and smooth. Now the recording is done and the interviewee's recording is really distorted at times (see attached file or here is a snippet: https://vocaroo.com/1gilmAYhZmPD). it starts with a clicking noise and then gets really distortet/delayed. at some point the distortion stops and the interviewee sounds fine again. but the distortion comes back. it's pretty embarrasing and I feel kinda stupid. - What would cause such a problem?- Is there a way to fix the audio somehow? thanks!

HiCan Audition CC loopback recording like audacity or Goldwave ?I'm running under windows mostly , seldom under macsearched around net and youtube , haven't found a good solutionthanks

From my research it does not seem like this is possible.  But is it possible to have 2 or more multitracks open at the same time?  Similar to the way you can have multiple sequences open in Premiere Pro open at the same time.

Can someone kindly help me I work in multitrack sessions and want to see the main editing screen ALONG WITH the mixing window at the same time, not have to toggle. I know I'm missing something I have tried articles and support etc.  And as a follow up I have a meterr at the bottom that says "Levels" I assume those are input?  Thanks community I recently switched from Logic and like audition!

Usually it just has the waveform on top (which is shown in the picture and isnormal) but there are multiple spectral displays when there's usually just one. How can I fix this?