Audition

Every time I open Audition, I have to re-configure this crappy setting to something that is actually a fair quality output. I have looked at the various articles here on this topic, and read all of Mr. SteveG's annoyingly rude responses---that nothing can be done to set Save defaults. Yes, there CAN be. The question, is WILL there EVER be?  Sure, the user may create a custom setting in this area to use, WHILE THE APP IS OPEN. But upon closing then reopening the next work day, sur-frickin-prise, there's that lovely MP3 at 24000 stupid hertz setting ready to screw up my audio again!! I only have to choose the custom setting again, says Mr. SteveG. Dude? I may as well recreate the stupid custom setting again while I'm at it.   I have a million steps to deal with in my work already. Why do I need this one?? PLEASE create a fix to allow one to save a default Save output setting--THAT ACTUALLY REMAINS AFTER THE APP IS CLOSED AND REOPENED. It's possible. But you

I've just had a huge upgrade to my PC rig, partly because I process large files using the effects rack in Adobe Audition. But upon processing my first files with this incredibly fast processor, I find that it is no faster than my old laptop, takking about the same amount of time.Looking up the resource monitor, Audition is not utilizing any of the available resources to speed this up! No cores are maxed, the GPU is at 0%, plenty of available resources... Why is it still so slow? Where is the bottleneck? Is it in the software architectre, or built-in throttle? Picture to illustrate: My system is top of the line, brand new, assembled last week, and the Adobe CC install is fresh yesterday. Any insight would be welocme...

Hey,I keep getting Error 205 when I open Audition.I'm on Windows 10 20H2. Any other Adobe program just works fine.I tried reinstalling it but it didn't help.  

Yesterday I used Audition for the first time to take away some background noise for a panel discussion I filmed. I used the Noise Reduction process. I saved the audio as a new file. But now I see it applied the effect even to my orginal audio meaning I dont have the unedited raw audio anymore. I need it now since an audicen member asked a question in the discussion without a microphone and I want to see if it was picked up at all since it's completley gone with the noise reduction effect. I opened up the audition file and now I can't see where I can remove the effect.  It's not under the Effects Rack. I don't understand how it saved this effect to my orginal audio as well and now I can't figure out how to take this effect out. Any suggestions please?

Audition isn't recording audio from the internet and I haven't changed the settings on my Focusrite interface.  It was recording audio from my studio mic and from the internet last week when I was working.  I have reinstalled Focusrite interface, checked my settings and both input and output are set to the focusrite and I updated Windows.  Audition shows to be up to date.  And it's blurring out the stop button when I'm recording which prevents me from stopping it. 

Trying to use  BCF2000 with Audition. What are the steps to get it running?

HiI recorded six mics into Audition via a Behringer XR18 onto an external SSD the other day and had these strange regular dropouts occur all the way through.They don't look like normal dropouts to me, more like very short delays.I haven't been able to reproduce the effect since.Anybody got any ideas?

I've used Audition for 20 years and must have had a stroke or something because I cannot remember how to mute/turn off the left track when I'm in waveform view. My recollection is that there is a single click some place that allows me to turn off one of the tracks when not in multitrack mode, but I cannot find that button. Please remind me where it is before I pull out my hair. Thanks.  Here is what I can see (below).

This is a feature request seen every year dating back to 2009.  Audition team...WE NEED, WANT, WOULD LOVE TO HAVE, organizational bins added to Audition so we can keep our projects organized.  I use Audition to edit a podcast and with hours of audio, interviews, sound effects, and music a bin system like you see in Adobe Premiere, and After Effects is a must.  This could be the year.  Please get on it!

Hi, I am new to Auditioning but not new to editing.  I have several clips on one track that are vocal.  I have two music clips on a second track.  I am trying to set the volume for each clip.  For instance, the first clip in the vocal track is a male and needs the volume to be set lower.  However, my voice is over a music track in which the music needs to be lower and my voice higher.  I can adjust the volumes in the mixer but it does not stay set for each clip.  The adjustment is for the entire track.  Is there a way to set the volume for each clip?  or is there another feature or setting.  Tia. 

Hi there,  For the longest time I've been having an issue with editing my podcast in Adobe Audition 2022, whereas when I'm say adding a noise reduction filter on the effects rack, it does not show in real time what changes are being made, only after I apply the effects rack. Is there any sort of setting I can change to allow this to be the case? The only workaround I see is selecting "preview editor" but that takes about 30 seconds-a minute just to show one change and obviously takes too long. Any solutions? Thanks - Matt 

Adobe Audition 2022 build 22.2.0.61 multitrack session was fine until i upgraded to Monterey OS.I use a Focusrite Scarlett 18i8 2nd generation interface.Latency issue when overdubbing a track. I sound in time with click track, but playback reveals I am way ahead or behind click. Changing Sample Rates and Buffer Size makes playback behind or ahead. Help, please?

Hi there. I recently updated to the latest version of audition. Now, whenever I convert a WAV file from stereo to mono, the tracks gray out and are uneditable. Please see screenshot. (I have it set to 16 bit.) Any idea what I'm doing wrong? Or should I uninstall the update? Thanks very much for your help! ... View more

Ok what is happening here. Anytime i use the pre render its muting all other tracks after two seconds of play or 2 sec of recording. This is incredibly frustrating. Anyone have any suggestions or remedies. I have heard some say updating system BIOS has worked but I really dont want to have to go throught the hassle and dont think its necessary. Please help. This is so lame....

Imagine you start up your favourite Adobe application, and find that with the latest updates there are some changes in the default behaviour of some features that ruin your work, so you want to set them back to how they were.      And also imagine that amongst these changes all the user interface fonts are now low contrast,   - like grey on  a grey background and in 4pt font..   So you can't read them.    You also cant find how to change the default settings back to how they were.   Now every time you do anything with this application you have to blindly click away at things until you find one that sets your work back to how you need it. So you write to Adobe asking if there's a way you can get to the defaults for the user interface.   You are ignored by Adobe, and out of the THOUSANDS of people using Adobe products only a single user offers a helping hand.   Not help, because there isnt any  &nbs

Hi all. I am looking to create youtube tutorials with my online alter ego, RowdyRobot. I want to try to use Character Animator to animate a synced avatar, shown above, to my voice. He would be explaining what is happening in the tutorial.My question here is how to use Audition to synthesize my voice into a more robotic sound.Can anyone suggest how I might go about doing that? Any filters, youtube tutorials, etc? It would be greatly appreciated.

Hi, using the latest version of Audition in the latest Mac OS Catalina 10.15.4.I used Audition fine yesterday, but today the toolbar is greyed out from the waveform/multitrack options, past the arrows, razor etc, to the brush and marquee selection tool.I can get them back again if I switch default workspaces from the arrows to the right of the screen, but as soon as I edit a single track (by double clicking the track in multitrack mode) and go back, the tools have disappeared again, and I have to do a temporary Default/preset workspace switch to get them back.Any thoughts? Thanks.

Hello,Currently, I have a song inside 2 different tracks inside a Multitrack Session. Track 1 is the full song while track 2 is just the instrumental version. I needed the song to be shorter to meet the required length of the final product. Thus, I used the remix feature to shorten track 1. I also need to shorten track 2 the same way track one was shortened. Is there a way to copy remix's properties from one track to another?Thank you so much!Ryan

I'm recording a long voiceover. I"m do it in multitrack mode. If I start recording, read some phrase, then press stop positions stopping right in that time, where I stop it. And if I press the record button again, the recording continues from this position. It is ok. But if I manually return to some previous point, for example, to reread one unsuccessful phrase, when after recording press stop, time position jumps to start of all track, to 0:00:00! So, to continue recording, I need first manually set the position to the last track in the timeline, and only after it I can continue my recording! It's horrible! How can I force the position indicator ALWAYS stay where I stop my recording so it doesn't jump to the beginning of the track every time?

Working with Permiere CEP + ExtendScript, my go-to reference was the the Premiere Pro Scripting Guide. I couldn't find anything similar for Audition, except for some examples in the Adobe CEP repository on GitHub (in the Audition folder).  Where can I find an API reference for Adobe Audition's ExtendScript?

It goes without saying this is beyond overdue. The uservoice thread to this hasn't been updated in a year. Has this extremely basic feature that's available is all other Adobe software been abandoned?

I'm editing long form audio files on multitrack, sometimes I speed it up (modified my settings so that JKL shuttle is half speed) and my levels are randomly either too low or too high, not the actual levels at normal playback speed.  Am I alone in this? It's making it hard for me to monitor levels when at 1.5 or 2x playback speed. Thanks.

Pretty new to audition. I was working on a podcast. Multitrack. I "Save As" the file, then closed.Now I come back to audition. I open the .sesx file "Post--EP3.sesx" and there is nothing there, as per screen shot. It's not in the multitrack format, none of the .wav files.... nothing. Just like a new file. What??? I do not get it....... how do you save and open projects in Audition? 

I need help how to fix this. Has anyone encounter the same issue?Please see the error message on the image I attached.

Hello,I would like to share a file created with Audition.I would like to share this music by sending by email a link to specific people, and when these people click on the link it opens the browser where they can play the audio file.But, I am looking for a service completely 100% all private (like adobe creative cloud), not something like soundcloud by example. The problem is that creative cloud does not give me the possibility to play the audio file in the browser. So, have you another solution ?