Audition

I recorded some "On-Hold" messages for our phone system which I produced the finals in Audition CC.  Unfortunately it ends up that the phone system (Avaya) requires a specific recording type and I'm not figuring out an export scheme to match what it requires.CCITT u-Law 8.000 kHz, 8 Bit, MonoWill someone knowledgeable on audio formats and the ability of Audition to export to this format let me know the settings or if it's even possible?Thanks,Dave

Please how can I use Adobe Audion CC to Stream live? I  want speak into audition via Scarlett and path the mixed voice live to my streaming software (Obs). I hope this question is understandable. Is it possible to directly speaknlive using audition?

Why is Audition recording room atmosphere and voiceover too loudly? Wavelengths of quiet room atmosphere (white noise) are HUGE and voiceover volume is recording so high it is off the charts and so loud it sounds like speakers turned up full blast. My settings in both software and hardware have not changed since my last recording session about a week ago when everything acted normally. There appears to be no solution for this. Does anyone have an idea of what could be going wrong? 

When storing audio files on my PC I always downsample 192/24 audio files to 96/24 files using Adobe Auditon CS6. Yesterday, when playing back one such file, I was surprised to discover a single loud pop/click/skip in one downsampled track when listening to it using JRiver Media Center 34. On opening up the offending audio file in Adobe Audition CS6, I was puzzled to find that CS6 played it back without any problem. Visually, there appeared to be nothing much wrong with the waveform where the pop occurred, as can be seen here:  However I then opened the same file at the same point in iZotope RX5 and got a bit of a shock because this is what it showed: So I have two questions. First, how can Adobe Audtion CS6 and iZotope RX5 give such remarkably different renderings of the same part of the same audio file? And second, if the iZotope RX5 rendering is accurate (as suggested by the pop/click/skip), how could a high quaity and trusted piece of software like CS6 introduce

Hi,I'm building a file that contains a sequence of multiple 1-second audio files (e.g., sweeps, harmonics, noise bursts). In the Multitrack editor, I’ve aligned them side by side, with Snap to Clip Edges enabled and no intentional overlap or crossfade between them.However, every time I try to combine them—whether by:Bounce to New Track > Selected Clips,Export Mixdown, orusing Merge Clips…the resulting file shows visible and audible overlap between signals, especially at the transitions (see spectrogram). All files were generated with “Effect > Generate > Tones”, duration 1 second. I’ve:Disabled global clip stretchingDisabled all fades and crossfadesDisabled smoothing of edit boundaries in PreferencesTried adding a 5ms gap between all files in my track before bouncingTried adding 1ms fade-in fade-out in my clipsDespite this, there is still consistent spectral and temporal overlap in the output file. For my use case, I need the signals to remain perfectly adjacent, sample-a

Hello, Last week I edited some videos with the same configuration with no issue. Today, my eardrums get blown out by my video's audio being 100x the volume it's supposed to be, I've been scouring the internet for a few hours and the only solution that has worked for me was to revert to an older 2024 version of the software. Will there be a better solution to this moving forward?  2024 Audition vs latest version Audition Waiting impatiently to hear something back. With tinnitus,Martin

I've been using Audition since before Adobe bought it, and it's always been the best audio editing program. But the last few years it has suffered an incredible amount of crashing. Today it crashes at least three times a week and causes me to spend from one to three hours making something, which disappeared when Audition crashed. I am madly frustrated that Audition has become directly counterproductive. When the program crashes, you can download a version that it thinks is the last saved version, I tried that once and it was a disaster. For some mysterious reason it never fetches the last saved version. When I tried, it downloaded a much, much older version than the ones I could load myself. Again directly counterproductive. I've been thinking about writing for a few years, but dropped the idea as I'm sure it won't lead to anything. But now I'm so frustrated that I have to spend so much extra work just because the Audition keeps crashing, so now I'm trying. Does anyone know what this i

Adobe audition - sesx files to resell with filters, is it possible? I would like to create a presets and sell them to and eshop.Thanks you guys for clarify.

Hi everyone... I am looking to finally transition to Adobe Audition after using Cool Edit for decades. I tried playing around with a bit of mastering today, but found that my exported tracks seemed to have compressed the waveform a little.  Sorry if my explanations are poor, but hopefully this pic will demonstrate what I'm talking about. You can see the original version of the left, and then my two Audition exports on the right, which look considerably 'smaller' in its waveform range. Is there a default setting or something that would force this? Thanks in advance for any and all assistance!- Ryan.

Hi, I need to keyframe the Parametric Equalizer - LowPass frequency, but I donť see an option in the envelopes drop down menu, see image, or maybe I'm just blind.

I got a new HP laptop (running Windows 11) and installed the latest version of Audition. I opened an old project and it plays back just fine BUT when I plug in my headphones it continues to play through the computer speakers. I tried this with other audio programs and when I plug in my headphones the audio switches to headphones, just not with Audition.Has anyone experienced anything like this before? I haven't.

As ths subject, does any ways complete this requirement?

I'm using a PC running Windows 10 Pro (will be updating to 11 at some point soon). Using Audition version 25.3.0.71 (a fresh update).When I load up a session file, or open a new session file, playback (either via spacebar or mouseclick on "play" button) will not play. It responds my un-highlighting the tracks - indicating that the input has been received - but I cannot figure out why the multitrack is not playing back.

All versions of Audition, Except for wav files, all other 24 bit audio files are incorrectly displayed as 32 bit.  Please see screenshot.  I use a 24 bit flac file for demonstration.  Has anyone reported this issue?  Hope it can be fixed, thanks.

I'm experimenting with Audition for the first time. How do I import an AAF file?

Hello!  I am still learning how to use Adobe Audition so forgive me if this seems like a ridiculous question.  I am using Audition 24.2.  I have one multitrack session where I am recording VO for an animated short film I am working on. In one of the tracks, I have recorded all of the VO for one character. Each of the lines is separated from all of the others in the track. I am now trying to export each individual line as its own .wav file.  Is there a way to do this? I tried "edit -> Convert to unique copy", I've tried "Right click -> Export audio of selected range markers" and lastly I've tried scouring the internet for answers or shortcuts on how to do this and there is not a straight forward answer except for exporting this as one big audio file and cutting it into individual clips in adobe premiere/after effects which I don't want to do at this point because I am kind of on a time crunch. Please tell me there is an easier way to do this

...suddenly popping after system update last night. I have checked settings, everything appears normal, but showing 'not working' for no apparent reason. Everything has been re-set, re-booted, etc, so now what for a "non techy" gal!!!??? Any very specific guidance will be greatly appreciated!! Alas, no phone support for Audition...REALLY?? Wow! Thanks guys/gals!!  05/24/18Kelli

I just upgraded to Audition 25 but there are only 2 languages available for the text to speech function - English US & English UK. No gender or voice styles except one. I know this is a very popular issue, so why is it so difficult to get a voice pack added / plugged in? Ive looked all over online and adding the voice pack via MS dosent work.I only really upgraded so I could use the TTS feature, but it seems I've wasted my time and money. Does anybody have a solution? Im only interested in english UK genders and voices. Thanks 

Hello,I just began using a new Surface Pro 11 with an ARM Snapdragon processor, and see that several Adobe apps are not yet compatible. I downloaded the Beta version of InDesign, but I do not see any information about Audition. Will Audition be compatible sometime soon?I use Audition frequently and cannot access it on my new Surface Pro 11. This is very frustrating.

Hi everybody.  I've been a mobile DJ since 1984, radio DJ and producer since 1987 and I'm currently volunteering at a local radio station in western Massachusetts.  I've been doing voiceovers for the station but just can't seem to get that perfect set of effects with Audition 3 to really get the "WOW" effect for everything I produce.  I tried the drop below 250hz thing, but I have a deep bass voice so that kinda defeats the purpose. Anyone have any ideas on which effects I should use? I attached a Legal ID that I will be adding a music bed behind. Thanks!

I don't know how to put it better, but in essence I'm automating an effect (a frequency shifter) in a multitrack project. It starts neutral and slides down in the middle of a clip. Simple as that.When I hit play, I can hear it correctly, but if I play it again, Audition doesn't recognize the automation is back in neutral position, so it plays from lower than neutral and slowly "adjusts" itself when the automation slides down. Even if I add a bunch of keyframes before the sound plays to try to jolt it into place. It ONLY works when I have the effect open for editing, so I can see the parameter changing with the automation. As soon as I close it, it goes back to being "lazy". Oh and it also affects the result when exporting. Anything in settings I can change even if it consumes more resources? This is pretty annoying.

Hello Adobe Community,    We are so excited to share that we have a new home and, it is better than ever! You can find the new homepage at community.adobe.com or adobe.com/community.      The Adobe Community is more than just product forums—it’s a place to connect, get inspired, and grow as a creator. Our new Community homepage brings it all together in one central place, giving you a clearer view of everything available to you. Whether you’re here to learn, contribute, or just explore, this community is for you — a place where ideas grow, connections form, and your voice helps shape the future of our products. This is your Community.   So, what’s new: A streamlined homepage where you can explore product forums, browse creative inspiration galleries, and discover upcoming events—all in one place. A new Creator Spotlight section featuring community members like you and highlighting your work and giving you quick access to starter