Audition

Hey everyone!  I just bought a mixer/USB interface and two XLR mics (Rode Procasters, specifically) to start a podcast. However, even after assigning the Audio Channels to the proper Tracks (1>1 and 2>2, respectively), and hit record, the Audio from each mic is being recorded simultaneously into both tracks.  In other words, we can't record my voice into one track and my co-hosts voice into a separate track; we're both in the same track. Screenshots below. Can anyone help? Best,Zach

Hello there, I have beem working in multiple sequences so I could test out new versions, but during the day something happened and my audiotracks started getting locked on to wrong time lines without being then able to be moved around. Basically, when I try to copy and paste a clip from an older version of a sequence to a new one, but it will not paste the way it was copied (even though the track set up is exactly the same). Instead the sound clips scatters all over. I have recordings with three sources of audio per clip and now they dont sit together one beneath the other, aslo I am adding things from movies which have different formats but it was not a problem before. I'm not sure if it all started happening after I started exporting/opening recorded voice from audition directly into premiere,,? I have tried deleting and adding new tracks to see if that would help but nothing. Also I have gone back to older sequences which worked fine before to see if I could work in them intead, but

I bought a Rofeer mic recently. My problem is the input sample rate only gives me one setting... 192000. The pull-down box to change the setting will not "pull-down" and it says "Default." I cannot record right now because I get the sample rate error. I've looked everywhere on YouTube for an answer to this but found nothing. How do you change the sample rate?

Okay, I have been bothered by this issue all day....I have always used Adobe Audition's built in plug in for pitch correction but today purchased Waves Tune Live. I watched a youtube tutorial on how to hear myself "autotuned" while I am recording. I am using a Audiobox for an interface. I clicked on the "I" to monitor myself and instantly heard my autotuned voice! The only issue was I could also hear my dry vocal with no autotune on it. I turned down the wet "Mix:" under the mastering rack and could hear my regular vocal with no autotune on it which is fine but when I put the mix back to 100% wet I could still hear both vocals (the wet and the dry). Is there a way to mute the dry vocal and still be able to hear my wet vocal? I have observed other Adobe users do this but am having a serious issue here. Help, anyone, please (:

In Adobe's never ending quest to make the simplest things frustrating and difficult, I have a simple question: I am recording a track. I want to just record myself talking using the built in mic. After a long stint on the forums and internet trying to figure out why the R button was greyed out, I finally found the answer.... apparently the default for a recording app is that you do not actually record. SOOOOO, I turned on mic input. So now I can click the lovely R and get a nice green bar indicating the recording levels, fantastic. But how to I actually RECORD! Where is the start button?

Vorgeschichte:Hey, ich nutze für meine Projekte sehr oft im Fenster "Diagnose" den Effekt "Audio markieren", jedoch würde ich mir dafür mehr Einstellungsmöglichkeiten wünschen, um selbst nicht mehr so viel nacharbeiten zu müssen.Man kann die Mindestlänge von Audio und Pausen definieren, was schon sehr hilfreich ist, ich hätte jedoch gerne eine Einstellung, um die erkannte Audio grundsätzlich noch nach hinten zu verlängern.Beispiel:Der Audio Start liegt bei 0:00.500 und die Dauer bei 6:06.00.Auf diese Dauer würde ich gerne automatisch zum Beispiel 300ms addieren lassen können. (Vorraussetzung, die Mindestdauer von Pausen liegt höher)Momentan müsste ich die erkannte Audio in Marker umwandeln und dann die Dauer jedes einzelnen Markers verlängern, was noch zeitaufwändiger wäre, als von Anfang an alles selbst zu markieren.Frage:Da es so eine Einstelllungsoption noch nicht gibt, würde ich gerne wissen, ob ihr andere Wege kennt, zumindest die Länge aller Marker auf einmal anzupassen? 

I can't believe the JKL keys don't work in Audition as they do in Premiere Pro.  Why is there no useful and easy way to do it?  Using clip stretching or modifying the JKL keys at 1.4x is not acceptable.  I have seen posts asking for this fuction going back to 2012, almost 10 years and no fix?   Seriously, how does anyone put up with Audition when it's missing this type of basic editing?   Moved from Using the Community (which is about the forums) to the correct forum... ModTo ask in the forum for your program please start at https://community.adobe.com/

I have a small company for which i would like to record voices for IVR like Welcome to XXX . I have the script . I would like to know in how many languages Adobe Audition can help me record the script

Please, can anyone here please guide me on how to make this audio recording clear? I tried a lot of effects already and nothing seemed to work. I wanted to remove the clicking sound that covers the hidden dialogs behind it. This is really important for me. Please.

I want to delete the marked portion of the track (PFA) without deleting the whole track. I have used heal option, but it didn't work, it only lower the sound in that part. So i think it's better to delete that part, but i don't know how to delete that. Pls anyone help me 

I have this problem where a clicking or pop noise appear when i pause or start the sound in adove audition. The sound is smooth all the way till the end, but when it loops or when you pause the sound, it makes a clicking sound or pop noise that's very annoying. I wonder if there's a way to remove it or reduce it, i tried the noise reduction setting but that didn't help at all.

I have a track with hundreds of clips referencing the same file. I re-linked the source file to one which is longer. However, the clips now appear to be 0:45.130 out of sync with the original edits. I was thinking I could just slip edit them, but it seems like that can only be done one clip at a time. Is that right? Is there a way to relink a track to media that is a different length while keeping the cuts from the first part of the file? It would be great to be able to slip edit multiple clips at the same time.

Any ideas on how I can process my singing in audition to make it sound more clear and reduce background noise as well? 

I'm editing a Sequence in Premier Pro that contains a multi-camera sequence with two cameras and a seperate audio channel. I do this quite often. I like to edit my audio as the final step in Audition. I selected "Edit in Adobe Audition>Sequence..." but when Audition opens I get this error message Error: File not supported by any currently registered plug-ins. I don't understand what "currently registered plug-ins" are, so I don't even know where to start troubleshooting this! I'm editing on a Mac running OS Big Sur 11.2, files are on an external SSD.All Adobe CC applications up to date. I've searched a number of old threads and tried their solutions but nothing is working. A couple of things I've tried: 1. Right clicking on all multicam clips and selecting Multicam>Flatten 2. Right clicking on all audio clips and selecting Render and Replace3. I've granted Audition with "Full Disk Access" in System Preferences>Security & Privacy Please le

So, this has started for no reason over the past two weeks and it's getting worse.  I start a recording and the waveforms are showing as you would expect, then after no particular time, Audition fades out the audio I'm trying to record but continues to record nothing (if that makes sense). What should be a 6 minute process, ends up at 20 or more as I have to stop, start another file and find out where it stopped recording. total rubbish

I use Audition every day and yesterday it will not open from creative cloud. Please help.

I'm running Audition through a RODE Caster Pro (RCP) when recording I get distortion. It sound like I'm talking thru a electric fan... I've tried everything I can think of to correct the problem, with zero luck.I also use Audacity and have no probelms recording in that with the way the system is currently set-up.

こんにちは。YAMAHAの電子ピアノCLP-645をMacBook Pro2019年モデルに接続して、Auditionで録音しようとしたところ、エディターの波形は出るのですが、右側にあるレベルの波形がでなくなりました。録音する音量が決められないため困っています。 どなたか解決方法を教えて頂けないでしょうか？宜しくおねがいします。

I renamed obm.db. but i didn't solve the problem. Anyone can solve it?

I've got a smartphone video of people taking turns speaking from a lecturn in a large, reverb-rich indoor space. The spoken words are barely intelligible, and I'm hoping to improve the quality. I'm hearing two severe issues throughout:- Booming reverb/echoes- A warbly flange/under water effect; I'm thinking is a compression artifactPer helpful tutorials I've found online, I've played with Audition's DeReverb and tried minimizing echo by tweaking frequencies via Audition's parametric EQ, but the results are only marginally better.I'm especially wondering if there's a tool that might help remediate the warbly flange effect?Any suggestions for an amateur? Thanks.   

Hi there, I have a 20 second .wav file that I drop directly into Audition. When I right-click it in the Files window and select "New Multitrack Session," it places this clip at the end of a 25 hour session. This makes it impossible to zoom and fine-tune the clip in the multitrack session.  This is what it looks like when first creating it:And this is the most it can zoom in: 

hi, im looking for an effect, that makes a mono channel to stereo: autamticall rotate to L and then to R, maybe i can set the "rhythm" of it... thankx

10 years ago...A proud Adobe Audition user by the name of _lauri_ asked a simple question."Is there a way to adjust horizontal scrolling speed (shift+scrollwheel)? In default settings I find it unusable slow."- 6th June 2011To celebrate this milestone of insufficient customer support/user experience, I thought I'd go ahead and make this post. As it stands today on the 1st of July 2021, there have been almost thirty thousand(!) paying customers of the Adobe Suite that have not had their need met.As a podcast editor by trade, it is obnoxiously inefficient to have a horizontal scrolling feature as slow as it is currently. Trying to edit sometimes 2 hour long podcast without an easy way to scrub through the timeline (or source file) is infuriating.Scrolling through the 10 year old thread with only 1 comment from an employee in that time was quite disheartening and highlights the lack of awareness Adobe has towards it's customers that use this software.So please Adobe... Celebrate this 10 y

Silly question, but in older versions one could serch for ma music library right in Audition.Now there is a link to download, but I only see SFX...no music.

I'm having this issue with recording audio in 32-bit where the peaks of the signal that exceeded 0dB are still being cut off when I reduce the gain after recording. I'm not being able to get the headroom that is expected when recording in 32-bit. The reason why I'm having high +0dB peaks is because I'm transferring audio from a Tascam 388 and some of that audio on the reels was recorded a bit in the red. I'm running from the Tape Outs on the 388 and have the input gain at minimum level on the interface that I'm using for transfer (Tascam 16x08) so I can't reduce the signal input volume any further. I'm recording the digital audio into Audition in 32-bit at 48kHz and again, when I try to recover the peaked audio I just get flat, cut off waveforms. Thanks in advance for any replies!