Audition

I have somehow lost the sound on Audition CS6 and the more I fiddled the worse it became. My set up is 2 hi-fi speakers linked up to a Sound Blaster Z sound card. Please find 2 screenshots and see if you can help me with this dilemma. Many thanks in advance.

I all. I've been working with Audition for about a year now. A new challenge that I've run into is trying to use the "Bars and Beats" time display for a piece where the time signature changes from 4:4 to 3:4 and then back to 4:4 again. Is it even possible to define the different time signatures in Audition, or do I need to mark up the PDF of the sheet music to help me keep the beat count correct when I'm trying to line up different parts of the singing? I hope this makes sense. If there isn't a way to handle this in Audition, what work process have you used? Thanks in advance for your help.

I can't figure out what I am doing wrong. I have changed the settings for the sterio input. It is set for the mic. The same for Master. I also clicked the R button as well. I have default input, output, and Master Clock set to my microphone. I can hear myself in the mic through my headphones but the track input level meter does not budge. It doesn't pick up any audio. What am I doing wrong?   -Greg   Moved from Using the Community (which is about the forums) to the correct forum... ModTo find a forum for your program please start at https://community.adobe.com/

I have been using the spectral view to great advantage lately....erasing out clicks in the middle of words, etc.  Usually, when you move your cursor to the spectral view area, it turns into the circle that is your 'eraser'.  Suddenly, this afternoon - it no longer appears when my cursor is in that area....  Anyone have an ideas of what changed or how I can get it back?Much appreciated!! 

I loaded up Audition today and all of a sudden there are these 2 rounded square icons over each button in Audition, one is a Microphone icon and the other is a Refresh icon but the Refresh also changes to a Pause button sometimes? I have provided screenshots below   I imagine I accidentally hit a hot key for accessibility settings or something but I can't find the setting.

I'm at a loss about this and so is my very competent IT department. I'm a radio reporter, often working on deadline, and cannot afford to have this keep happening.  I get the spinning wheel of death while working in Audition, and the only solutions are to quit the program and re-open it, or at times, when Audition refuses to shut down, I've had to re-boot the computer. The only saving grace is that when I then reopen Audition, I usually am able to return to session I had been working in. It's annoying, and a huge time suck. Our IT department looked for a solution, but nothing worked...including a total wipe of the computer and reinstallation. When that failed to resolve this problem, they swapped me out for a new laptop. Yep, it's still happening. On both computers, I'm running an up to date version of Windows 10. The only idea I can think of that we haven't tried would be to replace Audition with an older version in the belief that there's an as-yet undiscover

Just picked up a Focusrite Scarlett 2i2 interface for use with my MacBook. I set it up as the input and output device, patched track 1 in the session to be input 1, and when I hit the R button to arm the track, I don't get anything in my headphones, but do get an audio level in Audition. It records and plays back audio just fine, but I have no ability to monitor live. I'm not sure if it's a setting I have improperly configured, or whether I have a faulty unit. Please help!Thanks,Justyn C

I was interviewed on the radio and recorded it via the speaker on my computer. Obviously, the quality is hollow and not at all crisp. I have Audition and want to correct this so that the recording has a sharper sound. Admittedly, I only have very rudimentary skills on Audition. Until I learn how to do this myself, can someone please provide me with a step-by-step solution? Secondly, so that I can improve, what's the best available video tutorial? Thanks. --Mike

https://community.adobe.com/t5/audition/why-are-parameter-values-initialized-when-using-automation/m-p/11228494  Still having this difficulties.

Perhaps I just don't know what terms to search and would have already found the answer to my question within this forum by now, but... I want to be able to make markers in multitrack view and have them exported easily to the individual files. As a recording engineer, I often sit with artists in order to markup the recorded multitrack for what is or is not liked, but then find myself having to transfer these markers / notes to the individual files one by one, and often more than once depending on how many files are simultaneously recorded. Moreover, if the timing of my markers must be very precise, I have to spend time recreating markers with the same precision which is very time consuming. MOREOVER, if my multitrack contains any starts and stops (and subsequently more than one recorded clip per channel, the time in the multitrack editor does not correspond to the time in the individual wafevorm, making this process extraordinarily tedious. If there is a better way, I would love to

Hi. I recorded a podcast directly into my Audition multitrack session and everything seemed to be going fine, but suddenly everything disappeard and it says that the audio I recorded in Audition is offline and it's just a flat line. What happened? How can I get it back? This isn't a file saved offline somewhere else. Thanks for your help

I have several short vocal (spoken voice) recordings and I want to work out what the average frequency is for each. The recordings are open in the main screen and I have the Frequency Analysis window open and scale is 'Logarithmic'. 'Hold' - I clicked on some of these - how do I cancel this? Thanks for any help!

I have a collection of saved Audition audio files saved and when I try to go back and edit them the files only show as multiform, not waves, and have no audio or accesible traits. I have no clue what's going on, but I have edited these files before, so I believe they were recorded correctly. 

Any Progress?   

Planning a road trip away from my studio and considering deactivating Audition on my studio PC and activating on my Microsoft Surface Pro.  Has anyone done this?  If so, what are the potential pitfalls here??

Hello! Last week, I had the loops and beds page up and downloaded one set of loops. When getting on the next day to continue downloading, I refreshed the page and it automatically redirected to: https://www.adobe.com/products/audition/offers/audition_dlc.html which only contains the link to download sound fx. Can anyone direct me to the loops and beds downloads, or did those get shut down for some reason? Thanks! 

MS Teams has become part of the lives of many of us and it would be really beneficial to be able to record Teams audio with AuditionHas anyone successfully managed this and if aso could you please share your secret?ThanksScott

Hello, I'm having a recording issue that makes no sense to me and need to reach out. I've looked for related issues on various boards but haven't come up with anything. I'm doing voice over work, and when I record into ProTools recordings sound clear, as would be expected. However, when I record into Audition recordings sound very muddy with lots of low end echo. This is using the same hardware, same sound card, same mic, same cables...etc. It face it's testing one recording right after the other. I've tried EQ settings, to no help, which does make sense because why would it sound ok in one, but not the other? Does Audition have an EQ that the other app isn't using??? Setup - MXL 990 mic, Mackie 1402VLZ mixer, Dell XPS 8930 PC, Realtek Audio soundcard, 6.0.1.8248 driver version. Audtion build 13.0.13.46. Any help is MUCH appreciated!!!

Please can anyone advise if these bangs can be removed with the spectral waveform tool? I am having trouble isolating them to removed them from under the interviewee's speech. I'm not experienced enough with this tool to know whether to keep trying or accept when I'm beat! Thanks in advance.  

Hi.I'm using the newest CC version. When I try to put a video in the preview window, it shows a green screen only (audio works correctly).Yesterday I was doing pretty much the same and everything worked.Do you have any idea what is wrong?I tried to reinstall Audition, it didn't help. I'm in the middle of downloading GPU drivers and QuickTime, but it is a blind guess.Please help, it is a crucial functionality in my day to day work.Thank you

Hello, I am having trouble getting accurate audio exports from audition. Export>Multitrack Mixdown>Entire Session. Edited audio doesn't render correctly in the bounced file. This is not an effects problem. I have uploaded a short clip file that is correct and then another file that is a bit longer which shows the problem. The place at issue is renderred correctly at 00:33 seconds on the "correct" version. And incorectly at 1:43 on the "problem" version. Tracks are rendered pre bounce. The edited audio that is giving the problem is on Track 2 in the screenshot.  Any assistance would be very much appreciated.    Moved from Using the Community (which is about the forums) to the correct forum... ModTo find a forum for your program please start at https://community.adobe.com/

I have been trying to get consistent audio levels. I am referring to music (only) and not videos or podcasts just music ripped from audio CDs. I have tried all the difference settings in 'Match Volume' and although most of the volume levels are quite consistent you still get the quiet or loud songs between the good ones. What I'm doing now is normalizing all the songs down to -3db in Waveform and before burning them to CD I listen to them in CD Layout and use my ears to work out if the volumes are similar and if not I go to Effects>Amplitude and Compression>Amplilfy and start with adding +1db to the quiet songs and -1db to the louder songs until they are relatively the same playback volume. Is there another way to go about this or is this as good as it gets? Thanks in advance for any helpful suggestions and information.

I realized that my Scarlet Solo was set at 48k, but I must've saved the file in 44.1k.Around 55 minutes were recorded as 17... The playback is bad even when I stretch it. Is there a fix to this? First time I've ever made that mistake and I'm totally lost.  Thank you!

Around the time I installed the latest update to Audition (currently running 13.0.13.46), it started a really bizarre behavior. Now every time I move between audio files, Audition transfers the selection (as shown in the Selection panel) from the file that was active, to the file I make active. It's most annoying, as it means that when I record a pickup on the "pickups" file, then go back to the main file, i.e., the one I am editing, I have to locate that section in that file all over again.Is this some kind of Preference setting, or is it, as I suspect, a really annoying bug that was introduced in this update? It wastes a lot of my time; I have to remember to set a marker in the main file every time I want to record a pickup, or else go searching for where I was when I left that main file.Help!!

With all due respect.. as the title says. I just lost an hour of recording after crash and for whatever reason when the file was recovered, HALF the waveform was visable, but corrupt/mute. Not sure why this is a feature for only multitrack.I understand the crash is not Adobe's fault - but I've lost time and money (not to mention by voice is fried from the previous two hours of recording) because of this feature that could've been implemented over half of a decade ago.