Audition

Greetings!  I have used Audition 1.5 for over 15 years without a problem -- until now. I can record with no issues. But when I play a file, it only plays for about two seconds and then stops. I have closed and re-launched the program. I have re-booted my computer. Nothing has fixed the problem. Help!

I cannot access audio OneDrive Professional files on my hard drive. They are not shown! Why is this? I can see them in Windows Explorer but since I cannot access them, then I can't work wirh them of course. Also, when started twice, Audition says that it cannot load my default input/output devices and that my microphone and speaker are disabled but they work fine. After loading the devices or whatever it's called, fianlly the message no longer ocurrs. I am using version 13.0.12.45.

Hello, I'm embarrased to say how long I have been trying to isolate and remove the sound of a Windows notification from a clip. I can't see anything distinguishable in the waveform, so I'm not able to successfully capture any noise print, or apply the Sound Remover. If anyone could give me some guidance I would be grateful. Eric

Is there anything that can be done for a corrupted file that has a large file size but when it opens in Audition it won't play and has no waveform? Usually it happens when I created the file in Audition as a multitrack mixdown recording but when I go to reopen the session file it can't locate the track file or the track file opens but there is nothing to play. I'm using a Macbook Pro 2020 and latest Audition version. What confuses me is that the file size of the file I'm trying to open is quite large and/or exactly the correct size it should be but it seems as if Audition still doesn't think there's any usable audio there. Is there anything that can be done to fix this or prevent it from happening? It usually happens when Audition crashes or my laptop battery dies but its hard to avoid those things from time to time. 

When adjusting track EQ, is there a way to reset all the parameters? For example, after I tweak a bunch of parameters, how do I get it back to the way I started.  I have a similar question in the convolution reverb effect settings. After I tweak settings, how do I reset it? Also, If I add a bunch of keyframes on my clip to adjust the volume, how do I reset the clip's keyframes and reset the clip back to normal volume? On a normal knob or slider you can alt + click to reset it. What is the reset button for EQ, track keyframes, or effect settings (like convolution reverb)? I want to get the first picture (changed settings) to look like the second picture (original settings).  

For long voice recordings, I would like to use keyboard shortcuts to quickly finish my edits. However, after I set my in and out points, I cannot use the shortcut for Ripple Delete (alt + backspace) until I click on the area between the in and out points with my mouse to select it. Is there anyway to select the area between the in and out points without clicking on it with my mouse? I tried searching for this shortcut and also looking into the Keyboard Shortcuts but cannot seem to figure it out. If anyone knows I would appreciate learning this feature. Thank you!

So, I'm using a Virtual Audio Cable so that I could record my microphone in Audition and send all of the input towards that Virtual Cable. Using this method I can enhance my voice live. But unfortunately, when I try to test it while recording myself on the webcam, I can see that my lips and voice coming out of them are out of sync. I tried deselecting Smart Monitoring, but I still can hear and see the delay.I have the latency set to 100 and when I put it to 50, there is a small difference, but still enough to notice that the input and output are out of sync. I want to make sure that there is literally 0 latency/delay between them!Does anyone know how I can make it so, as it really bothers me?!Thanks for the help in advance!

hello there... I am new to the community and haveing problems with my adobe audition 3... it is not letting me access my projects anymore, says there is an error in the required application  library, please reinstall the  application, ,... I see from other post that are old 2016-18  etc about Looking to activate Creative Suite 2, Acrobat 7, or Macromedia products? but cannot seem to get anything but the  instruction downloads pdf files... is it true now that adobe audition is just dead now ??? my old system  will never work again ??? I have win 7 and reciently cloned my HD to a new one, but I dont thnk AU was working before that, last time I used it was about 5 months ago... I am an older user and cannot figure out WHAT is going on, or how to get my system up and running again... some how I need a step by step way to resolve this issue... thanks in advance, gittargary@gmail.com 

There is a circle with line through it...will not let me download.  I purchased from Adobe online and should be able to download onto new mac.  Anyone have suggestions?  Thanks

Please help as this was a very time-sensitive project due yesterday... I used to be able to easily tighten up my audios by deleting all the silent pauses and dropouts, but now the Delete All button doesn't work after I did the update.  What is going on?  The Scan worked for the long silent pauses- just the Delete button doesn't work (it just does nothing when I click Delete), and now even when I scan for short digital dropouts, nothing comes up there either when usually I would see multiple. What can I do??  

why can't I organize files into folders in Adobe Audition? I think it would be a great option.

I have created a keyboard shortcuts for 'fade in normal' & 'fade out normal' and linked them to the 3rd and 4th buttons on my trackball. (Would be great if I could map both to one button click. Is there a way to do this with some kind of action or macro?) The fades by default are set to cover the full length of the clip. How do I adjust their default length to something like 5ms to apply to clip edits?

Hello,I am wondering if there is a way to delete specific pithces from my audio in audition. For example, in the spectral display is it possible to select sounds at certain points in time that were a "C" note/pitch or a "B-flat" note/pitch and delete them so that they don't show up.To give an illustrative example, let's say I played guitar but accidentally hit the C note as part of a chord that I played (therefore all notes of the chord would be present, CGE for example), would it possible to delete that C pitch while allowing the other pitches GE to not be deleted (i.e. without deleting that whole portion of the audio altogether)?I thought there was a way to erase certain pitches, but I am unsure.If you guys know, that would be really cool to know as I've searched very hard for an answer but cannot find one.Thanks!

We have had issues where we could not have Adobe Audition 3.0 open while OMT software is open (broadcasting software).  After resetting drivers, Adobe now asks to save the session but then permanently removes the files so they are lost and not retrievable.  Is there way to get live suppport?

So have no problems setting key frames on a clip.  However, when I play it back in multitrack mode, the path has zero effect on the stereo imaging.   Have tried stereo clip in stereo channel, mono clip in mono channel.  Setting up the spline path no problem...but it has zero effect on playback.  Have only the one track active using  Have one hint: when in Clip Editor mode, the panning works fine.   What am I doing wrong?  Attached screen capture to show the clip and settings.  Note I removed other channel so is only left side.  Yet...it still plays to both sides in multitrack.  I don't get it.  Am new to Audition but not audio editing.   Sure is something easy...do wish Audition had more "tool tips" when hover.   Thanks in advance for info, Richard

Hello! I've been in hell for months and can't figure this out. I'm hoping someone can please help me. I will gladly PayPal someone a thank you if you have a solution that actually works. 🙂 The players:Me singing live into Audition. XLR mic via Focusrite Scarlett 2i2A backing trackWindows 10 gaming laptop (I'm not on Mac)VB Audio virtual cable to send Audition's master out to vMix streaming software (though it might not matter which streaming software I use since that doesn't seem to be where my problem is) The problem:For Audition to send the tracks through the virtual audio, I have to have my own voice on or previewed (press I next to the R for record).There is a delay between when I sing and hearing my own voice. I usually never monitor myself when singing because of the delay. I want to hear the backing track and not myself.I can't find a way to NOT hear myself in Audition, but still send my vocals (over the backing track) out the virtual cable. I know I'm not

The BBPlugin had to have an offset put it the sync as Audition was one beat out, not sure why it had to be different from all other DAWs ?Not sure why it don't have a tempo map like all other DAWs ? I was trying on 6 not sure if the issues have been fixed in a newer version ?The lasted build seems to work good in Audition, though a few things still need doing like local playback.You need to add a blank wav on the track or turn the clip level right down to get it to send sync.The BBPlugin can be set to sync start on any bar, so you can have multiple Plugins starting on different bars,This can be used for any number of things like a completly different style of music for different sections.

I was using this funcion a lot.But I can't found what I am looking for in AA 2020.I used to bounce my clips in selected  to new MONO track.I can't find that option any more so I bounc to the stereo and then convert it to mono 😞New version was supposed to save my time. I am probably missing something  #export

Alright, I have done my research on this, and tried the normal fixes from other people, and nothing works. Okay, I am taking WAV files, and saving id3 tags (yes, id3 with WAV files). It works! However, when I export the completed WAV files to a MP3, the id3 tags do not transfer over. I close out all imported files, and open the MP3, and add them manually again, and save the MP3 as a MP3, nothing saves. I try making the MP3 lower quality (it was at 320 kbps), it still doesn't save/export. Then I try updating Audition, same issue. I try uninstalling and reinstalling Audition, and nothing new happens. Don't get me started on how hard it is to add albumart to the MP3. id3 is supposed to be for MP3, so I am frustrated, and at a loss. Oh, and I have fooled around with the settings, and I have found no apparent fix. Gatene

How to apply favourite action on a selection    Yes, we can record an action and use it as a favourite, but how do I apply it to a selection? It only allows relative or aboslutie select.  

Hi all,I got the following setup :Mic => audition (effects etc) => virtual cable (VAC) => Xsplit (streaming software).Now I currently use MME with latency 200ms. Anything below that is causing stuttering. VAC creator advised to use WASAPI but I am at a loss how to make it work. In MME you can select A mic as input and VAC as output, simple. I then grab the VAC's output and set it as my mic in Xsplit.In WASAPI mode you can only select one device (see screenshot). What am I doing wrong?Could anyone guide me please as I'm quite new to audio stuff and only recently started using audition.VAC link:https://vac.muzychenko.net/en/ 200ms is not awful but I'd prefer to have a lower latency if possible. Mic is USB Razer Seiren.PC specs: i9-7940X 3.10 GHzX299 prime deluxe 2 motherboard (integrated 5.1 soundboard).64gb of ram.

I am not sure I'm using the right words, there's a lotta lingo, but the issue I've been having is if I select a small section of the spectral waveform with the marquee or lasso tool and attempt to change the volume with the HUD display, it makes the 3 seconds that are selected in the marquee tool as well as everything underneath/below silent. It's super weird, I tried selecting like the smallest area and making the smallest volume adjustment and I have the same effect- just a random silent blip in my track. Please help, trying to get rid of mouth sounds. 😞

Hi, I have a question: I record a dialogue mixed with male and female voices on one track. It there a quick way to identify and split into two tracks? Thank you! C

I'm using Adobe Audition version 13.0.12 on a windows 10 machine. I've installed additional voices on my computer following the directions as stated on Microsoft's website. When I open up Audition only a few of them appear and only the female voices can be selected. I've tested all the the voices out in the speech settings on my computer and they are all there and functional. How do I get all these voice to appear in Audition?

I need to know how to be able to add a live voice track to an already recorded music track and be able to hear boith tracks through my heaedphones for at this moment I can only get music through the headphones and the michrophone is muted yet is recording the new track.. I am somewhat a novice yet understand the basics. Please reply to me as if I were in the 2nd grade. Driving me batty. The answer will determine whether to buy a subscription as I am using the free trial at present. Thank you in advance. Regards, JT /  San Clemente, CA.