Audition

Hello everybody,I need help: I can't select "sound remove", why? Above you can see a screenshot, I hope you see the necessary information what I do wrong.Thanks and kind regards!

Hello Guys!!! It's my first time using audition and I'm having some technical problems. For some reason, I'm not able to increase/decrease the volume of the audio. The pan thing is not working as well. 

Hi everybody. Using Diagnosis it's possible to find silence of a certain duration and reduce it or delete it. I need the opposite: to find a short silence and increaae the duration, for example from 80ms to 200ms. The global duration is 3 hours, so I can't to do this manually for thousands times. Any of you can suggest me something? Maybe a plugin? Thank you.Stefano

I am using an Alesis Multimix4USBFX mixer as an interface.  I am not having a problem hearing audio, or recording audio.  The issue is that when I load a track to record over, it is automatically being recorded into a new track.  How do get Audition to play a pre-existing track, without having it automatically record into a new track meant for something else?

Hi There,   I edited a file on Audition, saved it many times. Then I closed Audition. And when I opened up the file again, every thing was gone. The file looks like empty. Unfortunately i didnt export any mp3 or wav file; how can I recover this. I also checked all the backup file, didnt find it.    Is there any chance i can recover the file? I can send the audition file for analysis.  Please help me with that

I uninstalled audition, and creative cloud reopens itself every 5 minutes asking me to cancel, remove, or keep Audition preferences, and regardless of which I click, it opens back up again. I've restarted, and done everything, and I don't want to uninstall creative cloud because I would have to reinstall all of my adobe applications as well.

I am at a loss as I have installed multiple times the Benztown Plugin for production work and it just will not show up in Audition CC. Does anyone have any ideas? or has anyone run into this before?I unpack the zip, install the exe file and it installs where it is supposed to be and I scan the folder but no vst shows up. Bizzar!  ThanksScotty T.

If I select a small area, it can detect silence correctly, if I extend the area selection (including the small area) and try again, the detection will be ridicolously inaccurate INCLUDING the small area. Any ideas why this is happening? If my settings proved to be working on the small area before, shouldn't the results at the very least be partially correct rather than getting ALL completely wrong? The file is 10 hours long, I attached a recording of this behavior.

I can't get the recording light (red button) to come on when trying to create and record a basic audio file.    I am using Audition CC version 6 Build 732 (64 bit) and using an Samson C01U microphone via a desktop computer. I keep getting the error message "The sample rates of the audio input and output devices do not match etc. etc."  A copy of the error message is attached.  I have followed the instructions regarding  Preferences and Audio Hardware/Mapping several times, and the sample rates are identical. Any thoughts? Cheers.

I have a karaoke version of a song and a normal version. The karaoke version has no lyrics. I was wondering if there was a way for Audition to detect what frequencies or something that isn't in the karaoke version and just keep that? 

I read a few tutorials that recommended the podcast multitrack template, but I edit my vocal track and bring it into the podcast template and breaths that I have reduced to almost nothing in original file are now deafening. Is the podcast template just awful? Or am I doing something stupid? The latter is entirely possible, I am new to audition! Thanks for any tips...

I am doing the following to edit my audiosSelect the entire recording > Favorites > Normalize to -0.1 dBEffects > Noise Reduction / Restoration > Adaptive Noise ReductionEffects > Reverb > Studio Reverb > Drum Plet LargeWhat else are the recommendation to make my voice sound even better?

I'm editing an audio interview and have been working with stereo files with interviewer on right track, subject on left track. At this stage, the edit is nearly complete, and am looking to split those pairings into mono tracks without going through manually to each of the 500-600 snippets and making them unique and extracting them, or other insanity. I need to deliver clean mono tracks to the mix. I tried creating mono tracks and seeing if I can drag a grouping to them with a modifier key to split them the way you can extract to mono when importing from the Files list, but either I'm doing it wrong, or there is no way to do that? I ... am really trying to deliver this today, so looking for wisdom from the Audition gurus for how I can leave all edits in place but have two nice separate mono edits! I don't have an option to bust back to clean tracks and re-edit as that could take several days! Thanks for any and all advice!

Hey! Its not that big of a problem, but when I export my songs, theyre half as loud as normal songs from other artists. I cant figure out why. I always turn the master to the maximum. Any ideas?

Hello, I am working on a horror video project while I am confined at home and I wanted to recreate or at least get a similar voice sound effect like the one you can hear from the Alien talking to Dr. Abigail in the movie The Fourth Kind (It's a youtube link and you can skip to seconds 0:44 to hear it) also (could be disturbing to some) Anyway I never really worked on audio for my videos apart for manipulating pitch or adding reverb using Premier Pro,  I've searched online but so far I did not manage to find something specific, if some of you could give me some advices it will be really appreciated thanks. Jivan

I am trying to create a template for the effects I have loaded on a specific track. Basically I am working on services that have the same lay out. I have the same intro and altro every time and I am only changinging the music and preaching, but the formatting remains the same. Beacsue of this I want to be able to load a template where the the name of the invidual tracks cary over, as well as any effects that may have been applies on the previous session. Do you have any thoughts on how i can do this? I thought about working off the previous file, but the problem with that is I am exporting from and back to Premier for the video portion. Let me know if anyone has any solutions. Thanks!! 

I've been working in a multi-track session. I used the de-clipper to work on one of the tracks and after I used it all tracks became "greyed" out. It seems like I can still do the work on them but not sure what this means or if it limits me later on. Attaching a screenshot.Thanks!   

Adobe audition has a place to download effects and more these come in .RAR format with folders How do I install them?

Hi folks,    I am at my wit's end here. I've never had this problem before. I'm trying to record, but for some reason the recordings are crackling and have a tin blip happening. It is occurring no matter what I use to record, from my Blue Yeti mic to my iMac built-in microphone. I can see a second line, below the main waveform, that seems to be picking up this problematic level.  I've tried playing with settings, doing a system restart, and uninstalling and reinstalling and it is still happening.  See attached example: (attachments corrupt, please re-attach. -Mod)

Ive lost my defualt stereo input option to select my inputs (Tascam 16-08) - Any help on how to get this back would be amazing!  

When I first launched Audition, there was a nice tutorial that opened on first launch with an audio file with a child singing Mary had a little lamb. It was easy to follow and I was reviewing the basic steps and thought I had minimized the tutorial. But for the life of me I have no idea where the tutorial went. Can anyone steer me into how to get it back up? (13.0.5.36)

Hello, I am using aodbe Audition to edit some voice files. All the tracks were recorded in my Iphone. For some reason when I import them some files apppear as stereo but mostly all as mono. I would like to convert them or have them all in STEREO. Anyone knows how to do this or why is this happening? Thanks!

Hello all.  Pardon my ignorance on this issue, but I just can't seem to figure this out on the new Audition. I really loved the old Audition, and I've been working on a pre-2010 version up until this year, when I decided to update to the new version. There are a lot of things that are different that I'm getting used to. The most glaring bit that I cannot figure out is: in older version of Audition, when working on the multitrack system, if I was recording something on a track that I was not satisfied with and wanted to re-record, I could go back and record over it without Audition creating a whole new file for it. And now, if I do 10 takes on the same track, I have 10 different files for the track and they're layered on top of each other. So when I save the session, I have dozens and dozens of files of takes that I don't want or need. How can I just... go back to recording over the same track and not have Audition creating new files for each take? Thanks for the adv

I recorded into Multitrack and all went well.  As I was working on my project (about 30 minutes after recording), my system crashed and restarted on its on. I'm on a Macbook Pro.  When I reopened the Audition file, my audio was gone, as if it was never recorded at all.  I can't find it in any folder nor on Creative Cloud. Is there any way I can locate this file? Thanx,David O.

I'm trying to apply doppler effect on the selected section. However instead of one specific section of a track, Audition applies the effect to all sections in all tracks. I've also tried keyframe but didn't help much. Thank you!