Audition

Is anyone else having this odd issue with Audition CC (latest version)?-- where you select your background noise area on the clip and go to Capture Noise Print, then select the whole clip and click on Noise Reduction Process only to have it not work at all.... until you do the exact same thing a second time.  It's so annoying and I don't understand why it's doing that.  (Been like this for quite some time, now... I was hoping this recent update would take care of it, but it didn't.  Argh.)   Thanks! 

I'm editing a podcast episode with a host and interviewee in Adobe Audition. I understand that you can select the Left audio and Right audio if you want to make changes to one and not the other, however, when I try to silence a section within the Left audio it silences it in the Right as well despite the Right being locked.    Has this happened to anyone before and are there any ways around it?   Thanks a lot 

I am a total newbie in audio / music, so can you, please, say which sounds better? Which one would be better for youtube videos? And is there omething I could do to make it better?

Hey folks,   My laptop just kicked the bucket, and my head hurts from trying to figure out whether or not laptops on craigslist will work with the latest version of Audition. Can you recommend a cheap (looking for used @ sub $400) laptop that will do the trick?   Thank you very much and have a wonderful day.

On the latest version of Audition, it plays a low piano note when the program is opened, or returned to, and each time I play the file from any point in the file, the program overlays a high pitched piano note (about 2k) with a long reverb tail as a spoiler.  Does anyone know how to remove these infuriating "features"?

after a new installation on PC win 7 pro 64 of audition CS5.5 the timeline cursor does not move - but audio is playing and i hear it well! whats the Problem? Thanks

I wiped the Hard Drive of my Mac...then migrated from Time Machine. Since then, my Adobe Audition has the WRONG log in and keeps asking me to purchase a plan...It's the wrong user/password...how do I log out of the incorrect one and log back in with the correct credentials? Very frustrating

Hello, When editing individual files, saving and going back to the multitrack sequence, I am noticing that my levels, which are set at -6db or -3db, are automatically raised even higher in the multitrack sequence output mixer. The files have matching settings and there is no effect on the single or master tracks in the multitrack sequence. Any thoughts on what could be causing this? 

I was recording a podcast today and probably made the mistake of not switching from Multitrak to Wavelength. So I have my recording as a sesx file, rather than an audio file. The AV team are saying I will not be able to get audio files from this, but I am sure I can export it (ie, as OMF files?). I really need this audio! Can you help me convert it into a wav. or mp3. file?Thanks Jules

Explain to me noise reduction.. I capture noise print -- ambient noise at beginning of voice track.. I select all.. Then it's noise reduction process -- I adjust the sliders to get the best sound.. hit apply.. However, nothing happens - the ambient sound is still there all the way through.   What am i doing wrong? And could the ambient noise be coming from my apple USB hubs? even though I am using a preamp..  My voice room is sound treated as best as possible -- acoustic foam -- heavy blankets.. I am in a little cocoon..  2 tracks attached -- dummy track with ambient sound -- or hiss underneath. And what I hear when I record nothing.. At wits end. hope anyone can help.. Thank you, Bill 

I'm trying to record a DJ set with Audition CC2019/MacOSX Mojave, but I can't get an input signal.I have double-checked that Audition has access to the microphone port in Mac security settings.I'm using a USB audio interface (Behringer UFO202) which does get a signal (I can listen back to with headphones).I have selected the audio interface (MMAUDIO Device) as input and output in Auditions settings, as well as on the track itself as the signal source; the i and the R button are clicked.What could be the issue? Thank you!

Hello, I'm after a specific effect to overlay onto some vocals I have recorded or some suggestions as to settings I might use. I'm looking for a similar effect as demonstrated in the included clip (from 3.19): https://www.srf.ch/sendungen/hoerspiel/infarkt-von-joachim-waltherAny help is much appreciated!

Hi im new to audition forums. My name is Dax and I just started a podcast so thought I use auditon. My question is when I record with my Blue Microphones Snowball iCE (https://www.amazon.ca/gp/product/B014PYGTUQ/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1) My audio jumps and completly changes sound at some points. Let me get some examples In my podcast listen to the audio at timestamp 2:00Compared to audio at 29:10 I find there is a wierd echo sound. on my mic (im the guy with the headband and green shirt) I also had issues with delay. I shot the audio in audition, and video on my camera. Synced them at the start but then as I watched later in the video the audio became 1 second out of sync. Idk if anyone knows whats happening. It could just be cause I have trash 60 dollar usb mics but let me know if you do thank you. DAX BRULE

I can record sound via Tri-Capture in QuickTime so the setup is fine. In Audition there's no input signal at all. The microphone access is granted to Audition in the Mojave System Preference.  Anyone has any idea as for why this is failing...?

Adobe Audition CC 2018Windows 7Audio file in question: 22050Hz/8 bit/mono I am using the Noise Reduction feature to capture a noise print of a segment of an audio clip which contains a hiss. I successfully complete this process, save my file, close it, and when I reopen it none of the noise reduction edits took effect. 

I started out with Audition 2 over 10 years ago -- produced a couple of albums with it -- and somehow got a free upgrade to Audition 3.I had to rebuild a workstation from Windows 7 to Windows 10 recently and needed to re-install the old software - Big whoops there! Validation servers no longer work -- and I can no longer launch any of these earlier versions of Audition -Another kicker is that these older versions of Audition projects are not supported by more recent versons of Audition -(I have since switched to REAPER software - and use Focusrite interfaces...)But - I am occasionally called on for a tweak or a re-mix on some of the stuff that I did with Audition 2 or 3.I had a chat session with Adobe recently and was told - "Sorry, the software is old - nothing we can do for you..."Is that entirely true? There used to be some forum posts about a work-around on the serial validation process.I bought valid software with the understanding that it would work, within reason, for the l

When I import a MP4 video file into Adobe Audition 2019, it takes extremely long time to load. Also, when I save the file. Can anybody tell me the reason. I have PC 32 MB RAM and 1TB Internal HDD, with 50% blank space.

Id like to know if there is a way to have all the fx racks for each channel turn off accept for the channels that are being solo'd.It would same my processor power when soloing and keep me from deactiviting them just to solo and playback smoothly.

Hello, I would like to get a clarification to the following:I am doing a podcast that focuses on speech so I have undertsood that using Mono is the right way to go.I dont need separation between left and right ear for my audio content. However, when I create the Multitrack session in audition, I need to select Mono or Stereo for the Master. 1) Does it matter whether I choose Mono or Stereo for the Master? If I am including music (intro jingle etc) does that mean I should select Stereo as Master?  And if so, do  I then select "Default Stereo Input" as "Mono Left/Right" for a specific track in multitrack with voice-over?  And for the jingle track, do I need to select "Default Stereo Input" as "Stereo Default"?  Please tell me what is the correct way to do this. Thank you.   

Hey everyone.  Im having a very serious problem here. Im trying to export my mixdown for my podcast episode and i keep getting an error for "bad allocation" which is causing the program to crash, repeatedly. Ive tried turn off auto back ups, turning of hardware acceleration. Please help me, how do I fix this issue. I was supposed to release the episode tonight. Sincerely; Dickie

Hello! Sorry if this is a common question, I had trouble trying to find an answer when googling and looking over the forums because it's difficult to phrase what I'm looking for. Sorry that this is a bit complicated. I have three recordings of the same conversation which is about two hours long. One is pristine clear audio of four people. Another is a web call recording of a fifth person with tinny web call quality. The third is clear audio of that fifth person with audio of the other four people at reduced web quality overlapping it. What we are looking at now is manually cutting between tracks every time the four people talk "over" the person who accidentally recorded them on their track. I was wondering if there was some way to automate the process or get the audio from the other call to at least partially cancel out the accidental recording since it's the exact same conversation. I know it's foolish to expect to separate out one human voice from another whe

So i wanna try making a sound that starts as a square or triangle wave, then shifts to the other one. I came up with a neat pattern to use as the transformation from one waveform to another, and I'm curious to see how it sounds. The only issue is that I'm very new to Audition and am not sure where to start. Is there a way to make custom waveforms from an image? Maybe from scratch if needed? This gif is pretty much what I'm aiming to do (each frame of the gif is one cycle of the waveform)  

Mix Audio Faster: Using the Essentials in Premiere Pro & Audition Fix audio way faster: Learn how the Essential Sound panel makes audio mixing surprisingly easy—and shockingly fast. Plus hear how Adobe Audition can help tackle every type of audio project.  

Hello,is there any possibility to save all the MP3 parameters to a profile that can be used when saving to MP3 format? I want to easily apply all the possible settings to automatically preserve that all my saved MP3 files have the same parameters.Thanks!

When importing an MP3 with cover art and I go to edit the audio portion and resave. It does not save the cover art again and I find myself having to re add the cover art.. Any ideas how to keep from resaving cover art?