Audition

I picked up this static from my mic, which gradually decreases throughout the clip. Unfortunately at the beginning, it's pretty bad so I'm looking for a way to reduce it. https://followtheboat.com/wp-content/uploads/2020/02/static.mp3  I have tried capturing a noise print and tried Noise Reduction and Adaptive Noise Reduction without any success, which could be on me for not getting the settings right. I end up sounding like I'm talking in a revolving box. Any other Audition settings I could try? Any other plugins that might be able to help? Thanks in advance.  

Adobe Audition CC will not recognize my Apogee One Interface. Audacity and TwistedWave recognize my interface immediately but Adobe Audition will not. Three days into my subscription and already regret subscribing. Any suggestions?

Adobe, let's get up to date.If I make an audio file podcast, do I REALLY have to enter all my ID3 tag information from scratch???Isn't there, by now, I way to save as a template (author name, show title, location, etc) so we can save a lot of time and minimize chances of errors and omission?How hard can a ID3 template tag be by now?Thanks!

Any help would be appreciated. I am totally new to Audition (migrating from Magix Sound Forge).I need to be able:(1) to detect silences of specified length (such as 2.5 to 5 seconds of silence).(2) place markers at each of these points.(3) output segments between markers as separate MP3 files.If this can be done by scripting or batch processing, it would be much appreciated to know how.(I have searched on the word "silence" but been unable to find detailed instructions on how to do this.)Thanks in advance for any help! I have Audition 13.0.2.35

Hello folks,I have a UMC404HD (4 I/O's), and I'm recording a podcast with 3 people in the room with another person chatting through Discord as the 4th cohost. I have Voicemeeter Potato and Virtual Audio Cables. I'm just trying to figure out how to record all of them as separate channels in Audition. Thank you

Does anyone actually use the feature within Audtion 2020 which auto creates a series of mp3 tracks from a wav recording which has previously been divided by cue markers? And, if so, have you had problems?I've been using that feature for many years, both on earlier versions and on Audition 2019, but the new version, from the updating late last year, has given erratic results. Copying the series of outputted tracks to memory stick always used to play on USB player in correct sequence from the start. But now play can sometimes start in the middle of the programme and sometimes transpose the order of play of some tracks.If you've experienced a similar problem, have you found any fix?The old CS 6 version was reliable and gave no problems in this respect. Is CS6 still obtainable? If so, will CS6 work with Windows 10? Information will be appreciated. Alan Wilding

I used two mics connected to a decent Canon video camera to record a live performance. The camera operator adjusted the levels of one of the mics during the performance, resulting in different volume levels. Is there a way to auto fix this, so that each track is on the same level? I know how to do it manually, but it is so tedious. I'm thinking there is an auto feature I just can't find. Thank you.

i currently have a monthly subscription plan for audition and photoshop with creative cloud. spectrum internet is down throughout upstate ny...am i able to use audition without an internet connection? if so is there anything special i need to do for it to work? if not, any suggestions on what i can do?

Okay so I have an interview, there is a section that is great and I want to use it but she continues on so the last word hasn't got the lower pitch that a person would usually use to finish a sentence. How do I do this in Audition? I have been playing with the pitch shifter but it sounds bloomin' awful. 

hey guys, i'm using MixPad and would like to get rid of it once and for all. The problem i'm having is that with MixPad, I have an intro that i'm playing before the main content. There are 2 parts to the intro... the music and the voice over. The way i have it working in mix pad is the music fades in then about 4 seconds in, it fades down in volume, not all the way and the voice over intro comes in. When the voice over finishes playing, the music fades back up to volume and then fades out. This is produced for a radio program so hopefully that makes sense. In mix pad, i just add points on a fade line and move the fade line up and down depending on the volume i need. How can i accomplish this in Audition? Below is an image of what i have in mix pad and you can see the fade line in red and what i mean. All your help is greatly appreciated. Thank you! damien 

I've run into this issue a few times and always do my best to make sure Cell Phones are off or in Airplane Mode when recording begins, but doing documentary work and events it doesn't always pan out that way.  I have a current audio file that is covered in the cell phone frequency beeps and no matter what method of noise reduction or adapative noise reduction I've utilized, it still persists in some capacity.  Anyone else dealt with this and have a solution without disrupting voice quality?

Hello,  I am having issues with a delay in recording vocal tracks. There are no audio latency issues, but when I playback clip it is behind by about a second. I am now having to constantly shift my clips over after each recording. How do I get back to realtime placement?  Using Audition on iMac 2019 8 gig ramyeti blue USB microphoneI/o buffer 4096Sample rate 44100 Thanks in advance!

Up unil yesterday, we could edit 5 mp3 or wave files and save them in a batch, and it happened really quick.  But somone at our studio accidently clicked some buttom, and not it is taking forever. Does anyone know what I can to reset the batch time, so we can get things saved in quick order?ThanksDeanKKRH and KKAG

when opening version 2020 and older versions on my mac.  I try to generate speech. the program freezes every time

Hello, Would appreciate a simple layman-speak answer please!Is an asymmetric wave form like this (see below) a problem? It sounds OK to me. It happens when I use Match Loudness ITU. This is for ACX Audible audiobook spec. I have done this:Normalise to -3dBGeneric high passLight noise reduction (process)Vocal enhancer pluginMatch Loudness  ITU -20 <where it goes asymmetricTotal RMS -15ITU -20 PS I'm new to mastering and have studied everything I can find; this is by far the best, most natural sound I've got so far after much teeth-gnashing, so if the asymmetry isn't a problem, I'm happy!Many thanks,Jules PPS the image wouldn't post for html reasons. It's nicely spikey-varied along the top, but the bottom edge is flat/clipped-looking.  

i am fearful that after noise reduction if i do amplification it will amplify the noise also. so first we should do amplification and than noise reduction? please help

 I have three recordings, let's call them  Recording ARecording BRecording C all three recordings have some "additional" and unwanted sounds in them, is there a way in Audition to compare all three recordings(Recording A, Recording B and Recording C) and delete everything that is not the same??  (ie. to isolate the "additional" and unwanted sounds, and save that as a separate audio track. Lets call that "Noises"track) So I can then use that Noises track to subtract from other recordings I may make (until I figure out what is making the sounds). any help would be appreciated. thanks 

Hi, i work in studio of editors for commercials and lately we started to work also with Audition CC now, we trying to do  a round trip from premiere CC to Audition CCwhen I press Edit in adobe audition I have no problem. and then the Audition gets open and I get the message that it Could not find the file.the "link media" is gray... no matter what i try it's not working. the problem repeats in all the company users 😕😕 can somone help?   

My previous comment is now added to;  When I go to save an audio file, it now says "stretch and pitch" and it is taking 20 minutes to save a mp3 or wav.  How do I turn off this Stretch and Pitch? Thank youDean Huibregtsedhuibreg@gmail.com 

Как петь в реальном времени с эффектами  в этой программе 

I used two mics, connected to one video camera, to record a live music performance. The camera operator manually adjusted the sound levels on the camera during the performance, resulting in the two tracks having different levels during some of the recording. Is there a way to auto adjust the levels so they match? I know how to do it manually, but it is so tedious. I'm not an engineer, so some sort of auto feature would be helpful. You can see the difference in the levels in the attached photo. Thanks for any assistance.

Same problem last year. On the phone with Dell for 6 hours to get that fixed.Two hours into it now, they can't fix.Anybody else experience this? Thanks in advance.

I can add a video to audition just fine, but when I select a clip to edit in the waveform editor, the video disappears. Do you know how I can fix this? I need to be able to continue seeing the video when I am using the waveform editor.

Starting of Audition v 13.02.35 takes about 30s on my Win10 machine.Looking at the logfile this seems to be related to the launching of the dynamiclinkmanager.Are there any suggestions what I could try to solve this issue? Log file created: 14.02.2020 10:41:58 --------------------------------------- Ticks = 0 <18956> <AuLog.Startup> <5> Begin startup sequence Ticks = 375 <18956> <MediaCoreInitializer> <5> Initializing PRM Ticks = 375 <18956> <AuLog.Startup> <5> Initializing XML Loader Ticks = 421 <18956> <AuLog.Startup> <5> Initializing Application Settings Ticks = 703 <18956> <AuLog.Startup> <5> Application: Audition Ticks = 703 <18956> <AuLog.Startup> <5> Version: 13.0.2 Ticks = 703 <18956> <AuLog.Startup> <5> Build: 35 Ticks = 718 <18956> <AuLog.Startup> <5> AuUI initialization sequence started...

I currently have a Pro Tools subscription that does not let me import/edit ambisonic audio. I would like to know if I sign up for the $20.99 version of audition, will it let me import ambisonic audio, i.e. FuMa/AmbiX formats. Thank you.