Audition

Bonjour, En tentant de régler un problème de setting pour mes sélections et mon curseur, je m'en suis créé un autre: mon Panneau Fichier a disparu et mes panneaux sont tous libres (non accrochés) à mon espace de travail.Si vous pouviez m'aider, ce serait fantastique! (Je ne suis pas une pro en matière de setting) Merci beaucoup à l'avance!

Hi all,I cannot get either my built in mic or my audio interface mic to input audio into any Premier Application. I can get any other application to accept my mics but Adobe will not pick up any mic. I have allowed the PC to allow all apps to use the microphone in privacy settings to no avail and I have set up all the inputs and outputs correctly in Audition. I have all the settgins right on my PC to my knowledge. When I go to record it picks up absolutely nothing, there are no wavelengths. I've spent hours now trying to get it to work but it simply will not.

Hello Everyone, I had to replace my harddrive and now when I record audio in adobe audition the audio is a slight lower pithced than recorded. The funny thing is I tried anothe computer with and I getting the same results. I am using an external mic, with maudio interface and adobe audition latest version on windows 10. Any help with this matter with be greatly appreciated. 

Hallo! Ich benötige Hilfe für ein vermutlich sehr simples Thema.Wenn ich in einer Tonspur, in der jemand spricht, bestimmte Teile herausschneiden möchte, wäre es sehr hilfreich, die markierte Stelle in einem Loop anhören zu können, d.h. dass der Zeiger am Ende der markierten Stelle angelangt wieder an den Anfang springt, sodass die markierte Stelle nochmal abspielt.Ich glaube, in After Effects sind es die "Schleifenoptionen" Hey,i need help with a very simple question.I have an audio track, someone is talking. I want to delete some words. I mark the word i want to delete, and what i would like to know is, how can i play the marked part in loop, so that its possible to really check if i marked enough oder not too much.I want the pointer go to the beginning of the marked part again, after it played it till the end. I hope to make my question clear. thank youkatharina 

I was working on an individual audio file, altering the left/right balance in channel mixer, then Audition threw an error and now all the audio in the file is GONE! Erased. I can't undo, I tried copy/pasting the file in windows to create a new copy, but that one is blank too. My entire audio file - lost! This is extremely frustrating. Any way to get the file back?

HOW DO I GET RID OF ANNOYING WHITE PATTERNS?

Greetings!My question is that if a midi file has pitch bend information -for example a guitar solo written in midi- or vibratos (in guitar pro tab) the DAW seems to not be able to read that information but only simple notes.Is there any solution on my problem ?

Greetings,Hopefully, I'm just being thick and overlooking the obvious, but I can't find a way to save appended tracks individually. Here's a typical scenario, I deal with live concerts and there are instances where, say, I need to swap the channels for every track of a show. I open the first track, append the remaining tracks, so I have the entire show as one .wav. I swap the tracks and now want to save the appended tracks(that have had the channels swapped) back as individual tracks again. Seems simple enough. but I can't seem to figure it out. what am I missing? Regards,Scott

I rearragned a few spliced clips in one track, and now those clips have a lower volume that cannot be changed. The volume envelope line is completely stuck; I can neither move it nor add control points to it on the rearranged clips. Is there any way to regain control of the volume on those clips?       

Hello,I have two different versions of Adobe Audtion installed on my computer by Adobe Creative Cloud. Each installation takes up 1 Gig of space. There are two versions 12.2.15 and 13.0. Can I uninstall the older version. Each version has two installation folders and two icons in the start menu. I would like to reclaim the space one of these versions is taking up. My subscription is through Adobe Enterprise as I work for a university and I am allowed to install on my home computer as I also work from home. Please let me know what I should do with one of these versions.Thank you.

Who thinks might know how to share a podcast but with a private link?

having trouble with version of audition CC2019 12.1.  I produce radio programs, and there are several files I use repeatedly within many programs.  lately, one certain file that I've used for at least two years has been crashing audition multitrack.  I drag the file into multitrack and boom - session crashes.  sometime the session is recoverable.  tonight two hours work disappeared because it couldn't recover the session.  I tried creating new copies of the file, but it just kept crashing after being dragged in. what would cause this?  

Which studio monitors are best in these three m audio bx8, Yamaha HS8 or Krk studio monitors

Hi. I'd appreciate some help in resolving this issue. I start recording, then I it stops in the middle of recording and I get this message: Selected audio device has no input channels available. I'd appreciate your help. Audition CS6. Windows 7. Thanks!Eric 

I'm using AU CC 2018.  I begin each project with a 50 minute master of raw dialogue.  I place the raw master on track 1, save the project with an appropriate name, and begin cutting.  First phase of project is a 22 minute clean version of the original.  We typicaly get two episodes from each 50 min "master" and they are uploaded for broadcast.  Here's the problem: Weeks later, an instruction comes from the producer,  with certain lines or words to be omited from the oroginal raw master, so they won't appear in the 33 min episodes.  So I call up the oroginal raw master and see that it obviously begins at 00:00:000.  Now I can move along the timeline and find the offending words I've been tasked to strike.  Obviously I can't destructively cut the oroginal, so I now open one of the edited episodes I think might contain the edit points.  Now of course the Audition timeline tells me the episode has begun at zero and I move to some point

I am attaching the first 30 seconds of a podcast that I am editing for reference. I have no idea what happened to the first audio file to make it sound completely different than the other two. It sounds completely fine and normal with headphones but sounds way off when I'm listening through the computer speakers. But, only the one file is off.  Does anyone know what effects I can put on it to make it sound closer to the other two?  

Hi, guys. Sorry if this topic has already been discussed, I did a search but didn't find anything, so here is my question. After upgarding to the latest Audition 2020 the Noise Reduction process seems like doing almost nothing, or was dialed back significantly. To illustrate of what I mean I did a short video of what I think is wrong: https://www.dropbox.com/s/2pqbzv310rk1quk/Recording80.mp4?dl=0 In short, before the Noise Reduction process after capturing the noise sample and applying the process to it was eliminating the noise completely, while now the same thing do almost nothing - a VERY LITTLE reduction. Would like to know if it's by design, or the filter is broken in a new version or maybe I am doing something wrong. Would be cool if some Adobe Engineer or powerful user will clarify this situation. Thanks in advance!

I've used both Audition and Pro Tools, and I like them both. The majority of my DAW work is just recording voice-over tracks, so I'd prefer to stick with Audition.  However, ProTools has the TCE ability which stretches or compresses with practically no distortion. Would the Clip Stretch for Audition do the same thing?  From the videos I have seen, it appears there can be some distortion - PLUS it only seems to work in the multitrack, whereas I work almost exclusively in the waveform...

I changed some settings in Audio Hardware and since then everytime I play audio, a static feedback/white noise plays for about 30 seconds then stops. This also coencided with my installation of Catalina so it wouldnt surprise me if the issue has something to do with that. To be clear, this issue is happening everytime I play audio from anywhere on my laptop and/or everytime I open audition. Any help is appreciated, thanks. 

I'm processing my first audiobook files. I'm making good progress removing unwanted sounds. I'm aware of the requirements for submitting to ACX.I notice in a big file that the sound wave varies a bit in mass and height. I have done Match Loudness across files. I made them all -21 Total RMS. I'm not positive what that means but the Amplitude Stats look similar now. Still when I look at the wave for an hour-long file in one view I notice some wandering up and down in overall height of the outer "fuzziness" and the center solid mass. Should I do something to level that out? I've seen "Normalize" mentioned. There's also Speech Leveler. ? Should I be making the Total RMS and *Average* RMS all be consistent across files? Thanks!

Hi thereI've started using Audition with my Blue Snowball Mic. I've used this set up before but for some reason, today I cannot start recording. My microphone is working and I checked in settings. Audition is offering it as an option but has (not working) listed. I've adjusted t make sure the input and output sample rates match as I remembered that stopped my last time but now I get the error "selected audio device has no input channels available". It asks me if I want to open the hardware settings. I do and I've checked the microphone is enabled, it is. I cannot do anything about the channel mapping and again, I see (not working) after the snowball mic. Can anyone help? I'm stumped.

Hello! Last year, I saw a video about using the parametric EQ to reduce room echo. The guy showed how to do it manually by sweeping through the frequencies and reducing them, but then he showed a quicker way to do it by creating a certain curve. Seems like I remember it looking like the first part of a sine curve. This helped so much, and I made myself a preset to use whenever I needed. Last month, work gave me a new laptop, and I saved everything except my custom presets, of course. Worse yet, I cannot remember what that curve looked like to recreate it. I tried, but it doesn't reduce much of anything. Does happen to know what I'm talking about?? LOL If so, can you please help me? I'd appreciate it!  

 I try install, uninstall, install other version, what can i do?

Does Audition havwe the ability to create speech from other audio? Here is what I mean...I have an mp3 of my father in law speaking. I would love to be able to create a message to my wife using his voice as they were very close. It would be special to her. Does Audition have that capability? Like something to analyze the mp3 and create a speech profile or something?

I recently filmed a few football games, and plugged my camera directly into the microphone they used to announce the game. every time the announcer switches the mic on/off to speak, there is a static pop/crack. He doesn't usually speak for about a second or two after he flips the switch, so there's some space between. is there a plug-in that would recognize and isolate these short and loud pops so that I could try and remove them without scrolling through hours of football games? thanks!