Audition

So I've been recording VO work using Adobe Audition with my M-Audio M-Track Plus and AT2020. Recently the levels on my recordings have all been stuck between -30 and -35db regardless of my gain settings on my M-Track Plus. I've double checked all my audio settings and the settings for my M-Track driver, but none of the settings seem to have been changed, so I'm not sure what could be causing this issue. Please help! Thanks!

I am still not grasping fully in a step by step process how to remove parts of one conversation like coughs, repeats, etc. without getting out of sync. I have read the forum question by NYCat and answered by ryclark about the ripple effect and watched the tutorials by Jason Levine on editing in his Audio 101 series and Dusty Porter's How to work with Multitrack Sessions in Adobe Audition. These have all been helpful in beginning my understanding but they are not detailed enough for me to have success in practice. Are there other tutorials and or fuller explanations of the process?

So I screwed up... was in a rush and didn't level out my audio input when filming the other day.  Now I have an audio track that is distorted and blown out, but really only with the background music.  Is there a way to reduce the background music and just leave the vocals?

Hi! There is a way to use Adobe Audition plug-ins in Pro Tools 10?I like the Noise Reduction and Tube-modeled Compressor from Adobe Audition.

When importing a progressive video to Audition CC, the video display is very good. But if the video is interlaced, the display quality is poor. And there seems to be no deinterlacing option in the menu. Is there any way to increase the interlaced video display quality in Audition CC? Thanks.

HiIve recently upgraded Adobe premier and Audition and now cannot export edited sound files back to Adobe Premier once edited in audition. Why?

Hey everyone, so here is my problem: I was recording an interview for my podcast, and I burp at one point during the interview--yeah...its embarrassing and I'd like for it to be removed. I record my interviews through Zencastr.com. Zencastr provides me with three audio tracks when I'm done recording:1. The audio from my end2. The audio from the guest3. The 2 tracks combined into oneThe burp shows up on all three including the audio of only my guest since he did not have headphones plugged in while doing the interview, so my audio bled through over to his end.So, my question is: is there a way for me to isolate the burp on the audio of just me, and use that to reduce/remove it on the audio track that includes both of us. This is not something that I can easily delete from the audio track of both of us since it happens while my guest is in the middle of talking. Thanks for any help anyone can offer.

Hello, I tried to install Adobe Audition, trial version, but I have the problem of the image. I tried to uninstall creative cloud anc components and reinstall it again, but it persists. If you know any solution pls tell me. Thanks

How can I prevent the pop-up menu from appearing when I right click on a track to move it where needed?  This has been frustrating & I need to know ASAP so that I can move these tracks around for a project due very soon!

So far every time I export my project in Audition CC 2018 my entire track has glitches. There is no clipping in volume, the project is fine when being worked on but exported it sounds like a digital mess of sounds. I went on another computer with Audition CC 2017 and it exported just fine. It looks like during the export it skips the last 50% but the track length is the same as in the project. It was a big waste of time and money. I've also tried changing drivers and disk drive locations and nothing has worked.

Hello. Has anybody tried TAL-Vocoder? I'm new to VST plugins, so I'm probably missing something really basic. After installing TAL-Vocoder, I can see two entries in the Effects menu: TAL Vocoder-2 and TAL Vocoder II Plugin. Adding either of them to Track 1 with an audio file makes the track silent. I guess some additional routing is required, but I couldn't find any instructions for that

I am new and practicing. I made a multitrack recording, then saved, then closed. When I came back and reloaded the recording, the recording will not play. I push the play button and the recording doesn't start playing. Why? What have I done,how do I fix it, and how do I not create the issue in the first place?

Hello. I have a Multi-Track session recorded in Audition CC 2015. The whole project is only 2 minutes and 30 seconds long. When I export the "Entire session" as a WAV file, it always adds an empty 30 seconds to the WAV file, making it 3 minutes long. The session is trimmed exactly at 2 minutes and 30 seconds, with no remaining data past that time within my project.Why is Audition adding these seconds to my WAV during exporting and how can this be stopped?Thanks in advance!

Wow...  After following the path listed on the Adobe site to get phone-based help with "How to's" I was told by a phone support analyst that Adobe no longer offers any phone support outside of installation, bugs & break/fix (Thanks Adobe - way to stand behind your product... NOT), and he even said that their phone calls were recorded and reviewed so he'd get in trouble if he helped me actually USE the software I'm paying for.  I remember a time when companies actually cared and supported the software they wrote when users needed help - especially media editing software whose projects are usually on a tight deadline.  Those were the days... So, since apparently there's no such thing as Adobe phone support anymore I suppose I'll post here to see if someone can help me get through this even with the deadline.  Here goes:I have a project that I created and edited in Audition CC 2018 for Mac and then once back in the studio I opened it in Audition CC 2018 for Windows

I have some audio tracks that were made from phone recordings. One track, both parties on the same track.The person recording the call sounds fine, and I know there is no way to make the person on the other end sound as good. But what chance do I have for significantly improving the voice on the other end?I have posted a link to a small sample.Thanks!Alligator 2 Mixdown by Project Meatball

Is it possible to change multiple inputs on the mixer at one time? It would be nice to select 18 (or 32) tacks and change them to the 18 (or 32) inputs without having to do it individually. I know I can set up a template, but . . .

Audition CC2018:Necesito ecualizar independientemente canal Izquierdo y Derecho de un Dual mono, bajo el nombre de un efecto, por muchas veces.Lo que hago y falla: Abro un ecualizador para canal izquierdo, meto los valores, lo guardo con enrutamiento solo izquierdo (omitir derecho). Abro un segundo efecto, ecualizador para los valores del canal derecho, enruto por la derecha y lo guardo (omito izquierdo). Luego salvo este efecto (los dos ecualizadores) con su nombre. Al llamar una grabación dual mono, llamo el efecto y lo aplico ....falla el enrutamiento...p.e. el que era izquierdo se aplica en ambos canales y el derecho solo en el derecho...(son mas de 60 ecualizaciones las que programé y me fallan cada vez)Cómo me sugieren hacerlo?Gracias

Hi,I never really used Audition before and I am kind of lost with the following problem. I want to record an skypeinterview with my voice from the microphone on one track and the interviewee from Skype on a separate track. In the Audio Hardware Tab only MME is available for Device Class and under Default Input both my Mic and the Stereomix (where I want to capture Skype from) are available. But I can only only chose one of them, and thus I can only record one of the two sources as inputs for the tracks.I am using CS6.Any help on how to record Stereomix and the Mic on separate channels is greatly appreciated.Thx

HelloI'm using CS6, and a problem has popped out from nowhere: Occasionally, there is crackling and static in the background. It's not consistent or regular. I've replaced a pre amp, changed a compressor, and it's still there. You can see some of the static in this file. It's throughout, but easily seen at the end. Thanks in advance!

Hello,i rencently bought a soundcard Yamaha ag03 and i am using it at 192 khz with the Steinberg usb driver.I work on a project in premiere pro and at the same time with Reaper DAW, the files i am working with on premiere have been recorded at 48kHz sample rate, coming from a go proThe first problem is , if it do not set the Steinberg usb driver to bet running at 48kHz i am experiencing hudge lags and image rollbacks in premiere, the only way to fix this is first to set the sound card driver to be running at 48 kHZ and then go in premiere pro, settings, audio hardware and select MME ( Asio doesn work for some reason??) and restart premiere.The second problem is that i am running Premiere and Reaper at the same time and i would like to be able to set the Sample rate at 192 kHz for Reaper, but its impossible because premiere pro will lag if i do that.So my question is, is there any driver or solution i could use to avoid lags and be able to run both programs at the same time at the highe

Probably not really but I think something got turned on or off by mistake (I'm a novice here).  I edit Premiere clips in Adobe Audition to turn down breaths, and auto-heal pops/clicks and lately the waves are automatically zooming in and out while I am listening and watching for breaths and pops/clicks.  I constantly have to readjust the image then it will automatically zoom in and out for pretty much the entire duration of the audio.  I am unable to keep the wave at one size.*I use and laptop with a touch pad but I find it quicker for me to use a mouse to auto-heal and the spacebar to stop/go.  It's taking me significantly longer to edit several minutes of audio because of this issue - I appreciate any advice! (FYI Cross posted in Premiere)

I am trying to add effects such as reverb and speed to specific portions of a track and blend/modify these effects in and out but cannot seem to do it without cutting the track up.For example, I would like the beginning of the track to be stretched and gradually speed up to normal. Any advice on how to do this? I have tried searching but perhaps I am using the wrong terminology.

I sent this feedback, then wondered if I was missing something: I would like to be able to see my "Favorites" just like I can see my Presets, so I can see what they actually do. In some cases, it was a while ago that I set them up so I don't always remember. I know I can save Favorites as presets (painfully, extra work; it would be cool to have a checkbox that would let me optionally save in both places), but I don't use them the same way. I use my Presets for settings I'll want for a long time, and Favorites for effects I either use very frequently (often also saved as a Preset) and for effects specific to a project (eg vocalist eq). Sometimes I find that I like a project-specific Favorite effect well enough to keep it as a Preset, but I can't, nor can I see what it specifically does. So, please make these visible and editable and saveable a standard presets, and maybe even link them.Please tell me if I missed part of the boat on this...

I'm pretty sure that this is possible, but I want to make sure that it actually is before I spend a couple of hours or days watching tutorials and trying to figure out how to make it work. I know that adobe audition has an auto silence remover. It scans your waveform and removes and clip that is longer than a certain time frame and under a certain decibel level. Premiere does not have such tool. This is unfortunate because it would be very helpful to get rid of all the awkward pauses and such. Is it possible to edit a video in Audition? Like when Audition deletes the silent parts of the audio it also ripple deletes the corresponding video frames.From some very light research I'm assuming that you can do this because I know you can import videos into Audition. So is this possible and if so, is it relatively easy?