Audition

Audition stops playing when the cursor reaches the end of the current view (end of the screen). How can I make Adobe continue playing?

Hi i'm using the latest version from adobe audition 22.2 and everytime i open my project the effect window for the racket effect opens and is unable to close (just infinite windows opening up!) I already updated my software on my mac (MacbookPro M1) and tried it with older audition versions. Anyone familiar with the problem? Thank you!

Hi all,I have a multitrack project and when tried to use the rack effect speech volume leveller function, the window opened to set values and now I can't close it. When I try to drag the window to the corner of my screen it duplicates itself and the original still can't be closed. I have closed the programme, restarted computer and made a copy of the project and the window appears upon opening the project every time.Help!!

Yeah, I don't see why, when I have a 6-core processor and 64 gigs of RAM, that Audition needs to take 30 minutes to mixdown a 42 minute long file.  It is neglecting about 80% of both resources.  Why can't it utilize higher resources to do the job faster?  Is there a setting I can change?

Hello. I have such a problem. When I connect Apple airpods(bluetooth)  I have sample rate  to become 8000 and can not be changed - but the song is available in 44100. what should I do?

Audition will not burn 1 hr 14 minutes and 14 seconds to an 80 minute CD.  It claims that it is more than 78 minutes and therefore refuses to burn it to an 80-minute CD.  What's the problem?

Embarrassingly, I can't seem to find out how to "Lock" audio tracks in a Multitrack session to prevent accidental adjustments. Any advice or suggestions?

I'm trying to open these audio files recorded in 32-bit float using the Zoom F3, but I keep encountering an error. Does anyone know how to fix this?Error: Media Foundation reported an error when opening the file.The byte stream type of the given URL is unsupported.

Hello. I was working on a multitrack project this morning, saved - went to lunch and repoened to finf the .sesx file won't open.  The error message is "Error. This file is not supported by libsndfile. Code: 149. Bad data offset"I cannot find anything online about this error - the original audio files are in tact but for some reason my earliest autosave backup is from about two hours previous before I did all the work. I just need a way to open that file PLEASE help. This is not what I wanted on a Friday afternoon 😞  

Hi,I'm trying to monitor my levels on the selected track armed for recording in a Multitrack project using the Level Meter Window, but the Level Meter Window does not work as it does in Waveform mode. Alt+i does nothing and when right clicking, the option "Meter Input Signal" is greyed out. The Windows Level Meter Window works fine when playing a track, but during recording (or before recording, when the track is armed for recording) the only level meter working is the small one of the armed track itself. How can I get the Level Meter Window to display the levels of the armed+selected track in a Multitrack session? And a related question:In a Multitrack session, BOTH the small track Level Meter when recording and later, the big Level Meter Window when playing, show the levels clipped at -3db: the display never goes above -3db and never gets into the red "peak" markers. But this is only an apparent clipping: when the same file is viewed in Waveform mode (or in a different app) it shows,

Hi team,  I really don't know what happened this afternoon, but I spent the afternoon editing, exporting and going about my business. When I was sharing the files I'd edited, I was getting messages back from people to say the files wouldn't play. Audition didn't crash, or show any warnings.  The .sesx file and the mp3 files that I exported are all absoutely unreadable. I've tried repairing them with all the usual services and they seem to be absolute toast. Trying to open them on Audition returns a 'dat?' error. If anyone has experienced similar, or even better could retrieve the data in the files, I'd be hugely grateful.  I've attached the main edit below, in case anyone fancies having a go at fixing!  (I can't upload below because it isn't even recognising it as an mp3!)  https://we.tl/t-uMEtzM8IAK Thanks

I had to get a new computer with a new boot drive. So my version of Audition 5? (CS6) is on a different drive letter now and won't work. When I try, it says the adobe application manager required to verify my license is damaged or missing. It tells me to go to adobe.com/go/applicationmanager but that link just takes me to https://www.adobe.com/creativecloud/desktop-app.html so...I really need my version to work because I spent so much time creating my own filter. I think that's what you call it. When you create something that has several filters rolled into your own.....filter I guess it's called. What can I do to get my version working?

Hello there! I'd love this answered ASAP. I have a Macbook Pro laptop that I am using to record stuff on for voice acting. My XLR microphone is connected to a Focusrite Scarlett Solo interface. I made sure that everything is connected properly and I can hear myself when I am recording. Even when I changed the hardware preferences to make sure that the Scarlett Solo will record my audio, I do not see anything on my screen when I am trying to record. Can anyone help me out? Thanks in advance,cfreedbe

I reported this as a bug a couple of months ago and, not surprisingly, got zero response from Adobe, so I'm hoping to have some better luck tracking down the problem here. I frequently get this error when I'm trying to save an MP3 file, regardless of whether I'm using "save," "Save as," or "save selection." The destination IS available and is not full. Normally, if I click "ok" and immediately try again, it saves just fine (but it's added steps because when saving an MP3, it doesn't highligh the file name text and I have to retype the name every time), and sometimes even says the file already exists and asks if I want to replace it. (Insert eye roll here). This time, it will not allow me to save this file as an MP3 at all. It allowed me to save it as a WAV in the exact same "full or unavailable" folder, but it keeps giving me the above error whenever I try to save it as an MP3. This only ever happens with MP3s, which I'm required to use in some instances, so figuring out

Hey everyone.I had been recording for most of the morning, closed an audition session to start my next recording and now it wont record any audio from my focusrite. my focusrite is picking up the mic, i have the device input set up right, I haven't changed any settings since I last successfully recorded and I have restarted my laptop and uninstalled and reinstalled audition and nothing has helped, it does record from my laptop mic though. Does anyone know what might be going on?

No puedo instalar programas de Adobe debido a un problema de interfaz.Hola, ultimamente estoy teniendo un problema que no he encontrado solucion en ningun lado y espero que aquí me puedan ayudar de alguna forma. Estoy tratando de instalar Adobe Audition version 2025, y al momento de hacer la instalación, la ventana del Programa de Instalación tiene problemas con la interfaz, de ahí no puedo continuar de ninguna forma con la instalación. Esto es algo que me ocurre con cada programa de Adobe. Adjunto una imagen de mi problema y la versión de windows que tengo: Espero me puedan ayudar 🙂

I'M RECORDING IN MULTITRACK and the track is label FUTZ1

I know Adobe has an API but I can't find info if it can do what I'd like, which is the following: call the API with a music file name and folder location, and then use one my of Audition favourites to process that file, and return if it worked or not. Please, is this possible, if so, could someone post some links, examples, resources etc that could help? I am currently using the latest version on a 7 day trial, and mention that only to get across I would be using the most recent Audition version. thx.

Nothing has changed on my Mac that I'm aware of.  No recent updates or installations.  Audition has just suddenly started beach balling every time I attempt to open or close a session.  And if you're going to say it's the hard drive, not correct.  I use multiple drives, and the one I'm currently using works just fine on my other computer. Macbook Pro 14 inch 2023 M2 with 16g ram.  Audition is up to date (25.0.0.47) and Mac OS is up to date 14.7.1 (as far up to date as my company will allow)

Buenos dias, llevo ya varios meses con el proceso al iniciar audition de aubackend, se queda en ese proceso parado y no hay manera de que tire para adelante, da igual la version y da igual lo mucho que limpie caches, que revise los logs o que le de ajustes de fabrica: Log file created: 12/03/24 12:29:27-------------------------------------Ticks = 0 <17892> <AuLog.Startup> <5> Begin startup sequenceTicks = 765 <17892> <AuLog.Startup> <5> Loading localized Au dictionary...Ticks = 1062 <17892> <AuLog.Startup> <5> Loading localized Au dictionary completed.Ticks = 1062 <17892> <AuLog.Startup> <5> Initializing XML LoaderTicks = 1078 <17892> <AuLog.Startup> <5> Initializing Application SettingsTicks = 1343 <17892> <AuLog.Startup> <5> Application: AuditionTicks = 1343 <17892> <AuLog.Startup> <5> Version: 25.0.0Ticks = 1343 <17892> <AuLog.Startup> <5&

Wechselt man den Eingang von Stereo auf Mono erlischt bei aktivierter Rekordspur die Pegelanzeigen. Man muss Rekord deaktivieren und erneut aktivieren um den Pegel sehen zu können. Dasselbe Verhalten ist nach einem Programmneustart zu beobachten. Ich hatte ursprünglich das Problem der Mikrofonfreigabe vom Mac welches durch den Support gelöst wurde. Da wurde auch kein Pegel angezeigt. In dem Fall war aber tatsächlich kein Pegel vorhanden, da der Mac das Mikrosignal nicht an Adobe weitergereicht hat (vom Scarlett Interface) Jetzt ist es nur noch eine Darstellungssache. Wenn man es weiß, kein Problem. Aber das lässt sich bestimmt beheben.

Hi there. I have a podcast episode recorded, but I messed up.. I only have 1 audio track, but two speakers. Now, luckily we never talked over each other, plus I have a deep voice and my partner does not. I kinda need to have an audio track for each one of us to be able to master it, is there any way I can automate it? If not, I might just cut the track by hand, but it's a pretty long episode (and if I manage to mess it up again in the future..) so if there was a way to separate them that would be pretty cool. I tried to use automatic speaker detection ai but honestly I'd rather not pay extra 60 bucks for one audiofile.