Audition

Hello, I created a voice recording in Audition CC (i installed all latest updates), but I can't edit the file. Razor, split, move... all that items are grayed out. I am in wave-form mode, and I pretty sure that worked before. I tried uninstall and install again audition, but it did no helped.Do you know how to fix it?

I have audition 3 running on windows 7. I can not get audition to record sound from the internet. Please help.

I am working on an audio book that includes recording from numerous sources, including from about 20 different readers, most of whom recorded with different hardware in different places.Some of the recordings have a lot of reverb because of the location, other have lots of artifacts because of the mics used, and many have background noise because of their location.My question is, should I clean up the noise separately or put them into one file and then clean them up section by section?I have been doing it separately but have found a lot of variability in dynamics and difficulty in matching volume once they are combined.In any case, what suggestions might anyone out there have?  The reverb particularly is a problem and I have installed the plugin DeVerberate that is kind of hit and miss.

I'm not sure when this stopped working - whether it was a Windows update or an Adobe update, but I can no long record "What U Hear" from my Creative sound card. I've tried every permutation I can with the Audition settings but no luck. This used to work not so long ago. Any ideas?

I haven't noticed this before, but if you work in the multitrack view, and you have zoomed in on the display and have "centered auto-scrolling in multitrack editor" enabled, the speed the display refreshes at slows right down.  This is true even if there's only one track used in multitrack view.  You notice it as soon as the display begins to scroll.  All dynamic content is affected, so level meters, phase analysis, spectral display etc. all update much slower.  It looks like they refresh at 5fps rather than 30fps.  I have a Nvidia GTX970 graphics card with up to date drivers installed, so I doubt it's a graphics hardware issue.  Playback and recording of the audio doesn't seem to be affected, just the display update.  I'm on the latest version of Audition CC 2017.1.1.Has anyone else noticed this behavior?Regards,Steve

NOTE: This only seems to happen when there's a lot of ampliude in lower frequencies (here, its' hot (bright yellow) from 20Hz and falls off by 150Hz).Edit: for this example, I generated brown noise and increase the amplitude of the lower frequenciesHere is an image showing a marquee around exactly where I'm about to paste. Notice that none of the lower frequencies are being selected. The lowest frequency is around 1kAnd that's what it looks like after the CTRL+V / CMD+V paste.Notice that spike at the beginning of the pasted audio? That's definitely unwanted. Frequencies outside of the ones I had selected were affected, and now there's an anomalies that I have to try to remove.I'm sure there's a logical reason why this happens looking at the code, but as an end user, this is a frustrating unwanted result, and it would be great if the developers could figure out a way to keep this from happening.Has anyone else had this issue? Does it frustrate you, too?Just for reference, here's approxi

For the sake of this post, I'm going to generate Brown Noise. But this happens with any noise and it affects me all the time.Copy a section of audioMix Paste over a different portion of audio with Overlap (Mix) on and a Crossfade duration setAfter doing this, you will always end up with an unwanted dip in amplitude.See those two darker sections? That's where the crossfade was applied.While I doubt this is technically a bug in the code, I can imagine that it's an unwanted consequence by most users.I'm sure the algorithm is functioning as intended, but the cross dissolve is far from ideal, leaving gaps throughout the duration of the transitions. This isn't a phase issue, but something about how Audition treats the amplitudes of the clips during the transitions.I'd be very surprised if there is a use case where this output result is actually desirable.Does anyone else run into this issue and want to see it addressed?

This will be a bit hard to explain.I have a multi-track session project with various clips positioned at specific times.How can I copy/import a clip from one multi-track project into another... but pasted exactly at it's time position as it was in the previous/former project? (without having to manually positioning it).

Hi everyone,I bounce large quantities of mixdowns daily in Adobe Audition (CC 2017, 10.1.1.11), and need to find a way to edit the default naming conventions, specifically to remove the appended "_mixdown". It might seem trivial, but it would save me a lot of time if my default export name was exactly that of my session name, without "_mixdown". Can anyone help me? I recognize this may be an under-the-hood fix, but I don't know where to find the appropriate file to edit.Thanks all!J

Hello,My friend and I are thinking about starting a podcast, we will be buying a mixer and two microphones that run through it to make sure we are recorded on separate tracks. Now I am really new to Audition and I am fairly lost.  I was wondering how I would make this work on Mac? So the two microphones plug directly into the mixer and then the mixer into my laptop. Once the mixer is plugged in, how do I make it so Audition allows me to record each microphone on its own separate track instead combining them into the same one?Thank you all!

Can people share how they deal with coughs? I do a lot of live audience recordings, and coughs are my biggest headaches.

I'm using Audition 1.5. With Windows 7. I'm trying to record audio from an audio cassette tape. I'm using line in and the sound is going to the computer speakers, but it will not record. I can import audio files into Audition and they will show a wave form and play. I have tried to use the Amplitude/Play effect. When I open the effects tab expand Amplitude and click on  Amplitude/Fade, nothing happens. That tab is greyed out. Can you help me?Dick Brownjrbrown55@sbcglobal.net309/691-0606

Hello!I'm finishing up final audio adjustments for a video, and I'm running into a problem. When played back in Audition, everything sounds great and how I want it, but when I export back to Premiere my VST compressor doesn't affect the audio. I've tried exporting in several different formats, and exporting the "multi-track mixdown" to later import through Premiere but the same thing happened. Is there some way to export in real time to capture the effects? Or have I done something wrong? I have my narration side-chained to a separate, non-vst compressor if that could be causing the problem, but I don't think that's it. The VST compressor I'm using is the Focusrite Red 3 Compressor, which appears to be the only effect not working upon export.Thanks in advance for help, let me know if there's more information you need.-Sean

I have this annoying problem right now during my exam.... Audition freezes when i press play, like the whole program stops working. I´ve tried to restart bothe the program and my mac but id did not work at all. any ideas?

Every single time I open Audition, I get an error warning telling me that my previous session didn't close properly and I have to choose what to do. This is purely a minor irritant, but ignoring such things often leads to darker places ...When I close the application, everything seems ok. Everything seems to work as it should and, most importantly, my work works and I love using the app!Does anyone else have this bizarre issue and if so, does anyone know how to fix it?My system is:Mac Pro 5,1 3.33GHz 6-Core48GB RAMGTX 680 Mac (CUDA fully removed from system)OSX 10.10.5 YosemiteAdobe CC 2017 - fully updatedEverything works well on my entire system, just this odd glitch ...Thanks for any help.Best,Dominic

Good morning,It's June 12, 2017, I have the latest update (release mid May) and I'm trying to use Audition to clip a big track into small tracks, and the program has a 50% chance of crashing if I use markers and export everything at once. If I try to select an area and "Save selection as..." the program crashes every 2 or 3 repeated operations of doing so.Also, when I try to Match Loudness on a batch of files, the program crashes. Simply cannot do it.This is unsustainable, in my view, this software is not usable unless Adobe releases a fix.Here's my system:macOS Sierra 10.12.3 (16D32)MacBook Pro (Retina, 13-inch, Early 2015) 2.9 GHz Intel Core i5 8 GB 1867 MHz DDR3 Intel Iris Graphics 6100 1536 MBUsing Harvest plugin for time tracking and using Dropbox. Turned both on and off in an attempt to fix it, but the problem persists.Pro Tools and Soundforge work just fine with both plugins on and batch processing these files.Thanks

I recorded an interview in a decent size office and the reverb is bad. Please let me know what I need to do to fix it.Thank you very much and have a great day.

Не пишет с микрофона требует какие-то дивайсы

Hello,I'm getting notifications that my Audition software has an available update.  I get as far as getting the screen to close Audition, then click continue.  Once I close Audition, the update screen goes away as well.  Is there any way to work around this?

Please download the attached file to view this post

Hi.I have this dynamics effects (that is obsolete) in Premiere CC. I want to reproduce it in Adobe Audition so I can use it's batch mode.But Dynamics effects in audition is different with Premiere.Can anybody describe how it's done in audition? (both compressor and Auto Gate)

Anyone know of a plug-in for Audion or Logic that has the same ability for Auto Heal and Noise Reduction w/ Noise Print? Seems Noise Reduction w/ Noise Print is still broken: "A severe error code was encountered (00000008)." No explanations or links to advice is simply bad coding.

I removed the silence parts in audio, but I do not how to remove the same parts on video or in other words sync with video. After the changes are applied I need to save it as a video. Thanks.

Do you REALLY need Apple to “Rock your home”?We always have Adobe Audition on our brains when we hear about new audio technology. The Apple HomePod https://www.apple.com/homepod/threw us for a loop, this week. During the Apple WWDC Keynote, we wondered if this would open a need for a new music recording and distribution model.There’s been a great deal of discussion about Apple’s new HomePod. It was touted as a music-based device in a product category primarily known as a “Smart Speaker.” That name is something of an evolution of the “Smart Phone” name.Google and amazon have had plenty of success with devices you can talk to and they talk back. That too is something of an evolution, in this case its Apple’s Siri which the other two players monetized for a digital home before Apple fully got around to it.But, is the HomePod a great music solution? Maybe that’s analogous to asking. “Is the iPhone is a great camera?” If you don’t own a professional dSLR (digital Single Lens Reflex) camera,

I can't figure out why this file won't get rid of silence there are a few pauses that are roughly 15 seconds long that the diagnostics tab won't pic up for some reason that's what I keep seeing, and this is what the waveform looks like currently. please help, i don't want to have to manually edit out all the silences.