Join the conversation on all things Adobe Audition.
Recently active
Recently, while recording new audio in multitrack, the waveform has been bright red while recording, as is the rectangle around it. The audio is recorded properly; this isn't even necessarily a problem, as Audition is functioning exactly as it was before. The track will revert to the default color once it's finished recording and you wouldn't know that there had been anything different at all; however, I'm at a loss as to what it is that Audition is trying to tell me here because I can't seem to find any documentation. What does this mean?
Sirs:My computer is Win 7 64bit Adobe CS6. Using mono mic thru M-Audio Pro-USB. How can I record to both channels at the same time? Otherwise I must copy and paste which very time consuming.Thanks,David
Ik gebruik al heel lang diverse Adobe producten (Ps, Ai, Dw en Audition) onder Windows 10.Sinds kort kan ik Adobe Audition niet meer opstarten. Althans, ik zie wel processen starten, maar die beëindigen direct weer zonder verder enige activiteit op het scherm.Ik heb gede-installeerd en weer opnieuw geïnstalleerd, maar dat heeft niet geholpen.De andere Adobe producten blijven werken als normaal.Iemand een idee?Corné
I'm running into a couple of problems:1. (This one has happened to me many many times): I go co close Audition. It asks me if I want to save all unsaved changes. I click yes or yes to all, but no matter what I click, even if I click no, the program will not close. the only way I can get out is to cancel it through task manager, and of course I've lost a lot of work, though I never know exactly how much.2. I save my file, as I do often. Then it starts trying to export the work to ... I don't know where, but that's inevitably followed by the message "The file is in use by another application and cannot be overwritten."Both of these problems often recur even after I reboot the whole system.Any insights would be greatly appreciated.Thank you
HiWhenever I reopen an Audition project it loads up fine with all my plugins, but without the preset name; instead it says "Custom". The preset is there, but not its name. It's driving me nuts!To clarify: I insert a plugin, I select a preset, I save the project. I close Audition. I reopen Audition, reopen the project, go to the plugin: I can hear the preset, but the name isn't there, only"Custom"!
I have connected an ADAT interface to my RME Babyface, and while I can see (and hear) the inputs to the ADAT interface just fine, I cannot for the life of me understand how I am supposed to be able to record the eight inputs in Audition.When I check the Audio Channel Mapping settings, all I can see as a default input for Audition is "Default Stereo Input".I know I can record several tracks when I enter Multitrack mode, but I want to be able to record eight channels (or even the eight ADAT input channels mixed down to stereo input into Audition) in Waveform mode.Is this possible?I just launched Audacity, and immediately found out how I can record, say, ten channels into it. Input from ADAT interface is registering just fine.Can anyone help me set up multitrack input into Audition?
Hello, we have encountered an urgent problem with Audition and are hoping someone can advise us on a solution. We recently did an update of Adobe Audition CC but now when we import the OMF files Audition it is no longer able to manage them. If we use the non updated version instead we have no problems. The OMF files we use are generated by Protools 11.3.1. We were wondering if anyone else had had this same issue and what is the solution to this.Thanks for any advice.
Hallo zusammen,ich habe folgendes Problem bei Audition 3.0.Wenn ich eine Session (Track) mit ca. 8h aufnehme, abspeichere und wieder öffne, sind nur ca. 2h27min vorhanden. Wenn ich diesen Track außerhalb von Audition abspiele, läuft er volle 8h. Kann uns jemand helfen ? Wir sind eine Schule und müssen aus diesem Track einige Dinge herausschneiden. Vielen Dank
I'm working on project where I take a sample of a musical instrument tone, adjust for pitch and amplitude, then clip a representative sample that can be played seamlessly at the correct pitch. When I look at the FFT graph of the original and the FFT of the looped replay of the sample I see that the single cycle looped has extra peaks not in the original sample. The original sample has peaks at the proper frequencies for the sample. It goes down to -80db. The first peak should be about 440hz but I'm seeing additional peaks at 146hz and 292hz. 146hz is 1/3 of the fundamental and 292hz is 2x 146. Since both show up before the desired fundamental of 440hz they may be a problem. I only want the 440hz and its harmonics. The single cycle graph goes down to -160db. .I did a quick test to see if I can figure out the extra peaks. The graph shown below actually has 3 cycles of the wave so that the pitch came in correctly when played at 44100. I did
Hello,I have this audio coming straight from a camera video interview.It was filmed with the T5 built in mic but there was horrid wind outside. What can I do to remove this?http://peterfriedlander.tv/windsample.mp3
Hi,I insert few recordings into multitrack, saved it and gave colleague to cut it.Received a multitrack file that on the beginning looks good but further the timeline there is more "delay".Finally, after 40-60 minutes on the timeline cuts are located in the middle of the sentence instead of the end of sentence. Everything looks ok on colleague computer.
I understand Windows 10 now includes no option to record streaming audio from a radio station. I would like to record a radio show I stream and was hoping there is a way do record streaming audio through Audition? This is for my own personal use only.Previously I could record streaming audio through Screen Recorder Pro but when they wanted $129 to renew for the year, I decided not to renew and since I have Creative Cloud I was hoping I can record streaming audio through Audition.Any advice out there?
Changed from DP and Logic to Audition last year. I do VO, so just editing my own voice usually.When I have a sound that I'd like to lower the volume on, like a slight whistle on an 'S' sound... or a remnant on the back side of a fricative like a 'T' or 'K' that I'd like to fade hard... the volume reduction seems selective, as parts of the waveform in the selected area pop back up to where they were - ignoring the command I just gave it.Same type of thing happens when I do the fades... it often doesn't want to fade the area right at the start or end of the fade, and leaves a bump of audio right when it should be just about at zero.When I made those kind of waveform adjustments on my old platforms, it just kind of did what I wanted... this not so much.Am I missing some setting. Any help greatly appreciated, because this little thing is costing me a bunch of time.Thanks
I'm sure that this must be very basic, and I don't recall ever having encountered this in prior releases of Audition, but I'm currently not finding a way to specify different input and output audio devices in Audition CC 2017. Here is what I'm encountering.When I go to Edit -> Preferences -> Audio Hardware, I see that the microphone I want to use is there --However, I do not see a way to add a second hardware item for output. Clicking on Device does not have an option to add another device, and I can't see a way to do it with any of the other dialog boxes. In Audio Channel Mapping is the only area within Audition that I've been able to find so far that addresses different input and output audio devices, but both reference my microphone, and there does not appear to be an option to edit them --Left to my own devices, I'm not able to figure this one out, and since my output is trying to play through my microphone, I have no audible playback of my sound tracks.In o
I have Adobe Audition CS6. I use Effects >Generate Tones to create tones that I use for audio bench testing. I discovered that Audition automatically dithers all 16 bit generated tones rather than generating them as non-dithered tones. I had to use another DAW software program to generate non-dithered 16 bit test tones. I could not find any menu in Audition to generate 16 bit non-dithered tones. I assume that is because no one recording or mastering music tracks in 16 bits would do that in an un-dithered format. My question is, does Audition also automatically dither 24 bit music tracks that are recorded and tones that are generated, or does Audition only dither 16 bit music tracks that are recorded and tones that are generated?Thanks,John Johnson
Under Time and Pitch in Effects I only have Stretch and Pitch, no Pitch Correction. Is Pitch Correction something I can download?Thank you.
Is it only me or is Audition new UI a really too busy. Especially the audio Mixer. What is the purpose of the many dozen horizontal lines in the mixer channels. It dis tracting and painful to my eyes. The same goes to that flat UI. It's about ime Adobe gives us a usable and user friendly interface.
It happens to have a very long recordings where misplaced cables created a continuous high frequency cracks buzz or whatever sound it is, impossible to clean with noise reduction, noth filters or other techniques I would much appreciate if you can help actually to perform the job. I have small small but not sure how can I upload it
Sorry this is probably user error but here goes. (Audition CC 2017.1 release Build 10.1.0.174 iMac Late 2009 2.66 GHz Intel Core i5 16GB ram Graphics: ATI Radeon HD 4850 512 Core Audio stock sound card playback through built in output)I have a WAV file 48kHz, 24 bit TC that is a 6 channel iso record from a Sound Devices 664 field mixer/recorder that loads and shows me all 6 tracks in Waveform but in Multitrack there is no display and no audio although the playhead moves. We have tried to load this on another mac machine and also two different Windows machines all with the same result.Audition CC Audio Hardware is:Device Class: Core AudioDefault Input: Soundflower (2ch) ( I also tried built in input but same result)Default Output: Built In OutputMaster Clock: Out: Built In OutputClock Source: Not AvailableI/O Buffer Size: 521Sample Rate: 48000any help is very appreciated!!!
Please, please, please add a feature to be able to route audio from other applications (Skype, Quicktime, Facetime, etc.) so that these may be recorded in a multitrack session. It's ludicrous to have to purchase another application to accomplish this! Thoughts, Adobe?
I'm trying to compress a 34 second commercial into 30. For some reason, it changing my pitch real high.
Hope that someone can help me with this!I work with my Mas OS (Now on Sierra), Audition and my Duet from Apogee Hardware since 2 years now. No Problems until this last week.Now my Duet disconnect during session. It might be a Buffer size problems.. But I changed nothing in my preferences.I confess, I continue to learn editing so maybe it's easy to fix, but your help may save my day!The problem also seem to start as the moment I update mu Audition to C.S.7I am french so sorry for the grammar mistakes and if you speak french don't hesitate to answer in my language 😉Nathalie
So I'm having trouble trying to route my audio in (what seems like) a simple way.I just want to play an instrumental in one track and record my voice into a second track while listening to the first one. However, whenever I record into the second track, Audition records not only the signal from my microphone, but also records the sound from the first track, leaving me no isolated vocals that I can work on independently. I have a small Behringer 2-in 2-out USB interface. I've been able to easily accomplish this simple action on FL Studio, but I want to record my vocals into Audition first. Any ideas?
hii have a large file, and i added several markersto slip / save in several files must i always to merge all the markers ?is there a way to avoid to merge them ?i'm asking because if i merge marker 1 and 2 , i lost the part between mark 2 and 3 ,seeing merging mark 1 & 2i have added markersi have merged mark 1 & 2as you can see in the second screenshot the part of between marker 2 & 3 is gonethanks
Hello,I just got a Lenovo Ideapad 300 a week ago. I downloaded Audition CC. I was using it earlier today without any problems. However, as I was editing it, the recording sound distortedly old. What I can do to fix this issue?
Remix with Firefly Community Gallery
Thousands of free creations to fall in love with and remix in Firefly.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.