Audition

I am working on a project where I have to analyze 3 video files and 2audio files' frequencies simultanously; all of the wav files have information up to 98kHz.  Does the spectral frequency display go high enough to display 98kHz?If so, is it possible to view 2 spectral frequency displays with 3 streams of video all playing simultaneously? Any help is greatly appreciated 🙂

Hi everyone, I'm trying to clean some audio files for a short video I've made, we record with a F6 and the sound engeneer has recorded the tracks in a multichannels file, the problem is that when I try to open a file from the multitrack to the waveform to clean it up it show me this message on the noise rediction panel: "The channelization of the current noise print does not match the channelization of the active file. For optimal result, capture a new noise print from the active file".of course I've capture the noise print from the file I'm working on and I don't know what to do 

hi there, is there anyone who can help me?I had an important interview with my host and I clearly remembered that I had already saved it completely. however, when I tried to open it the next day, the file only saved the very beginning part of the origin (the whole recording should be 1h but only 1 min. left!!) here is the clue that I think might cause the problem: my C disk doesn't have enough storage to contain a huge volume recording but I didn't see the warning while I saved it. I have tried any method that I could find on the website, ranging from downloading the transfer, using some software to retrieve the corrupted file to trying to find a backup on my computer. it is very weird, I'm sure that I have saved it completely according to the type of backup i saved but i can't open it since audition showed that it didn't support the form of the type stream

We brought in a new voice actor for a studio recording.  He is a singer but had never done voiceover work.  Even double micing him (416 and TLM 103), trying every manner of angle and positioning, we could not help but pick up these weird nasal squeaks (almost like nasal "farts" heh).  If he held his nose, they disappeared.  I've never seen nasal sounds this loud before, and no matter what he did or what we did, they were littered through our recording. So far, I can't get them out, no matter what I do in post.  Anyone have experience with getting these out in post in Audition?  Or through any other means? I attached a brief clip of it via dropbox.  The recording is in Japanese, and the first one is on the TLM103, then the 416, then a separate clip from the 416 with a slight variation of the nasal sound. https://www.dropbox.com/scl/fi/5slpev507lyc631vr8zhr/Nose-sounds.m4a?rlkey=95785fbgybfuczmod28k2b008&dl=0  

Hi,Does everyone know how to reduce the breathing sound in a podcas with audition please ? Thanks a lot !!

I record a track in Mutitrack, pull it up in Waveform, adjust the volume, and the audio disappears!  When I re-call it up in Multitrak, it appears the audio is there, but it will not play.  Going back to Waveform, the track is empty.  Have I lost this track permanently?  Why did this occur?

Hi;Isn't there any way to export only the preset that I created on my own to send it to another computer? (Someway, same premiere.)gratefullyMartin Miciciday

My Audition's Primary Temp folder (Audio Disk Chache) is very large (amostly 100GB) with files going back almost two years. Is it safe to delete some or many of those old files? Or even all of them? My Secondary Temp, on a different drive, is completely empty.

Ever since the latest updates, I keep getting an error where it tells me an issue with my hardware has come up even if I am in the middle of using it. It typically happens after i export something. I never had this issue before the latest update, and now this will happen several times during a session where I need to close and re open. I have checked the hardware and nothing has changed on my Hardware.   

 I accidentally pressed something and messing with the undock, and the history tab and consequently resulting in this black screen which confused me greatly.  After using Reset to Saved Layout the screen returned to this.But this one is my actual original section but after pressing it it resulted in the black empty screen again. I'm confused to what problem I'm having and is there a way to recover my progress in my original file. Hope you guys could help, thanks!

I just updated from an older version of audition to the cloud...the audio is on the track...you can see the wave forms and you can see it in the meter.  Why do you think I can't hear it?I can hear other audio on my computer  both in programs like premiere or just on the internet.  Thanks for your assistance.

Dear Community,i'm currently engaged in a research project and am in need of a specific tool. My project involves a 24-hour WAV file from which I need to extract and count various signal tones, such as beeps and horns.To facilitate this, I plan to provide a sound sample as a reference. The goal is to have this reference sound identified and counted throughout the duration of the 24-hour WAV file. If anyone has insights or knows of a tool that could assist in this endeavor, your guidance would be immensely appreciated.Thank you very much for your time and assistance. Looking forward to your suggestions!Best regardsMaarten

Hello all, Longtime user, rare poster 🙂I'm trying to process a very big session, and I'm receiving the error "Audition has reached limit of audio data it can use". This would be easy to figure out IF I was running out of space, but I'm not! To be sure, I've dedicated a 5TB hard drive **JUST** for the Audition Cache files. Unfortunately, the exact moment the Cache folder hits 250GB, it freezes up and Audition crashes. It won't go beyong 250GB despite my having 5TB free. Please help! SteveG if you're around :). Thanks all! Here's what my scratch disk/folder looks like https://www.dropbox.com/s/xs9r3nn1zgzg5cs/Audition%20Error.JPG?dl=0-Alex

Hi, I'm using the most up-to-date version of Audition, on a Mac with OS 10.14.6. I'm importning .m4v video files into Audition's waveform editor, and am encountering an occasional but repeatable issue. When I import certain video files, the video preview will show up fine at the start of the timeline, but at a certain point the preview window will go black during playback. The point at which this happens is different depending on the videos - some will go black after 5 or 10 minutes, some after 60+ minutes, but even if I close/restart/reimport, the point at which one specific video shows black will be the same. Once this happens, if I stop/pause playback, the preview screen will then display the video at the current frame - but once I restart playbck, the preview goes black again. I'm not doing anything intensive at the time - simply playing back and adding markers. The intent is to mark and pull samples from the videos, many of which are in foreign languages - so I need

So, am I correct that this page is inaccurate?https://www.adobe.com/products/audition/free-sound-effects.htmlThere is no "Easy to find" "collection of searchable, high-definition" "12K free sound effects" in the Audition program, correct? I found the archive link to the sound effect library, but only in this group.

  Audition is throwing a fit when I try to import a sequence from Premiere. I've tried reinstalling everything, updating everything, duplicating the project, clearing caches, clearing the temp folder--nothing. Other sequences open fine. Plenty of room on all drives. Plenty of computer capability. No clear indication that it's a particular sound file. I can send just the music clips, or just a few dialogue clips along with them, but when I try to do the whole thing it takes a dump. Tried isolating a clip to see if one of them was problematic, but I'm not getting a consistent behavior. Super dumb. I guess the latest version of Premiere will no longer create an Audition project to send? Never seen this before. Anyone else happen to run into this? TIA. 

I've been using Adobe Audition for several years, but I just recently bought my first Midi keyboard controller, an Akai MPK Mini 3 25-key controller. and at the same time, I'm moving all my DAW software, files and so on to a brand new HP Envy laptop with Windows 11. I've downloaded all the Akai software and I can see the controller in the device list, and I can hear sounds coming from the keyboard when I use their enclosed MPC Beats lite DAW. But when I star,t up Audition, the directions tell me to go to Edit ==> Preferences ==> Audio Hardware, then I can select the midi controller on the input line.  The Akai controller Keyboard is not on the list. Default Input I see  "System Default - Microphone Array (Inel Smart Sound TeYhnology for Digital Microphone}",  and "Stereo Mix (Realtek Audio)", and finally "No input".   So I'm stuck. you guys don't publish a user manual that I could print and pour over, and I haven't got time for wade thru all the video tut

Ok, so total noob here so this has to be something so simple it's gonna be a "There's no gas in the gas tank" situation but I'm just not seeing it.  I'll try to provide all the info, but if I miss something please ask. I just purchased a Logitech Blue Yeti microphone and upgraded my Adobe Suite to include Audition. I have the mic plugged into the USB hub of my Dell U3223QE monitor, and I have output through the jack located on the mic itself. I can hear through my headphones everything going into the mic. On Windows 11, all of my updates are updated. I've read a few articles and so far I have: Made sure that Audition has the Yeti set for the Audio Hardware Made sure Windows also knows I want to use this micWhen I test this in any other application the sound sounds.When I'm in Audition, and I right click on the Levels window and select Meter Input Signal and speak, the level meter bounces around all happy it has a job to do.When I click record, I

It would be really useful to have the capability set a Video Sync Offset in milliseconds for external displays (like Premiere Pro). 

Hello!  Hoping for a bit of help. I'm recording a multi-channel podcast through my Motu M6 External Microphone. When connecting to Audition through my Mac. When going to "Audio Hardware" from the audio input, I can click M6 for default input so that on the main track screen I can choose exactly which mic will go to what track.  On my Windows computer, from the "Audio Hardware" screen, it does not show M6 that I can click. It shows motu 1-2 and motu 3-4. It won't allow me to put one mic per track on the main track screen.  Any recommendations? This could be a Motu problem, but I'm wondering if there's something a bit different about Windows 11. 

Mac M2 – Sonoma 14.1 - Audition CC - multitrack mode – wav input - mp3 output. Refer to the two attachments. In the first session, audio output volume is as expected at earphones or other listening method. In the second session, audio output is considerably lower. When playing back audio within Adobe Audition, volume in the audio level panel is visibly and plainly different between these two sessions. Both clips were recorded with the same audio settings (with Rodecaster 2).Adobe Audition capability for volume matching was utilized for both sessions and set to:                  ITU-R BS.1770-3 Loudness                  Target Loudness: -19 LUFS                  Tolerance:         

After upgrading to Adobe version 24. I could not export audio from Adobe Audition v24 to Premiere Pro (v24). I can opened Export to Adobe Premiere but the check box "Open in Premiere Pro" is greyed out (disabled).I still can use "Edit in Adobe Audition" from Premiere Pro but can't open back in Premiere Pro from Audition.Any idea what is the issue here? Need help ASAP.

The short and sweet: Is there a way to play music from my PC through USB to the Mackie headphones jack and while using the mic on line 1 have Adobe Audition record the Music and the Mic on seperate tracks...aka recording studio, karaoke etc. Thanks!

Hi everyone, this might be a very easy question for all professional sound designer, so I hope you can help me.I downloaded this sound and wanted to make it a way louder. But problem is, that it's clipping.  https://elements.envato.com/de/heartbeat-heart-beat-U7QPKUQ Can someone give me a hint what I can do to make it louder without clipping? Thanks in advance!  

Hi During most Audition actions I don't think too much and do things intuitively. For a few days, I couldn't open a saved x.sesx multitrack file with Windows Explorer correctly. It does open since the x.sesx extension is set to Audition in the W11 settings, except for the default screen with nothing to see. The saved multitrack screen only opens completely within Audition itself.. Menu, File, open. I felt my blood pressure rising after getting a blank opening screen the first few times after a couple of hours of hard work in Audition. I presume that this bug issue is a Windows 11 one. Assuming that you guys have more intense contact and meetings with Microsoft, I thought it was useful to bring it up here. Thanks for reading and hopefully answering. Best, René