Bridge

the new... multiple content panels does not work for multyple monitors becouse it dose NOT show all of the individul pannels. we need to have Full Bridge windows open in multiple monitors..... In my case I have some times up to 5 or 6 bridge windows including volumes on networks... ADOBE, Plese Fix this Mess!

Even after receiving the update of 13.0.1 I found that UI character sizes have only three choices.  I got back to 12.0.3 immediately which has four choices.  Please increase the degree of freedom in UI as we are using the Bridge in many different display environments.

Hello,Finally I found when Bridge 2023 is working slowly. If Bridge window is maximized and in Filmstrip mode I try to scroll photos, then scrolling is slow and glitchy. Even if I scroll JPGs (not RAW) scrolling is slow on fast PC. If I'm scrolling by mouse wheel or by slider.But if I don't maximize window (just 99% of full screen, but not maximum) then scrolling is normal.Sure I don't know why this is happening and how to solve it. I'm using Windows 11, Nvidia RTX 2080ti with all latest updates.

HiI recently updated all the adobe photography suite and have been finding that Bridge 13 does not recognise my Sony CF express card reader. It gives an error of E:\ Not found or not supported.  I have tried on both my laptop as well as my PC and both give the error.I have since rolled back the update on my PC and that seems to have worked - I am on 12.0.3 again. How will I know if this issue is resolved and I can update to v13 again?

When using multiple monitors one should be able to choose which will display the slideshow. Currently, it is displayed on the monitor where the content strip is, but this does not work for every configuration. The back/forward buttons on the mouse are not working as they used to when navigating folders. To go back or forward, now one has to use the arrows on the interface itself, it's a lot easier with the mouse arrows.

Hi there dear photoshop / bridge community!!!I will explain the drama so I can ask for help: I have about 500 sets of high res photos ( 3 views for each SKU) eg: mt0001-M1 ---> mt0500-M1I need to create duplicates ( low res versions) for each file. eg: mt0001-M1--->Hi res--->retail1    --->mt001-M1-1.png (1500x1500@240dpi)    --->mt001-M1-2.png (1500x1500@240dpi)    --->mt001-M1-3.png (1500x1500@240dpi)--->retail2    --->mt001-M1-1.png (2600x2300@300dpi)    --->mt001-M1-2.png (2600x2300@300dpi)    --->mt001-M1-3.png (2600x2300@300dpi)--->retail3    --->mt001-M1-1.png (3900x2300 @11363214)    --->mt001-M1-2.png (3900x2300 @11363214)    --->mt001-M1-3.png (3900x2300 @11363214)|mt0500-M1  how can I automate it??????Im really LOST on this.Ive been trying LR for it but I can not do it. Any in

J'ai copié un dossier de photos du disque dur principal de mon ordinateur vers un autre dossier de photos situé dur un disque externe. J'ai fait ce déplacement en utilisant les fonctionnalités de Bridge (glisser-déplacer).  Ce dossier contenait à l'origine plusieurs piles différentes chacune avec plusieurs images. Après la copie, toutes les piles étaient disparues, bien que les fichiers qu'elles contenaient soient toujours là. Est-ce normal?  

Since latest update, can't Drag & Drop from file explorer to Bridge!!!  Plus lost ability to navigate forward and back with mouse buttons. 2 huge issues in my workflow!! Love the new Panel flexibility, but you can have it back if it costs this much of a problem!!

It will not stop crashing

So besides the fact that I can no longer use Control N to open a 2nd or 3rd Window of Bridge and compare directory contents, here is another setback.I go through all my day folders and add descriptions, which are mainly species names.  I also add keywords and other data.  When I have updated many folders with such information and weeded sufficiently, I renumber the files according to my system and then add the description to the file name.  So this new Bridge has the feature that if I Bridge search, for example, all the files, that have 'bald', it will find all the Bald Eagles and I apply the name to the batch.  However, unlike before, on the next search, if I go to find all the ones that have 'Kestrel' amd then highlight the result to rename, they all show they have Bald Eagle in the description. The correct name won't appear, unless I go to an individual file and click in the description name, then it goes away and can be replaced.  Then I must verify, in thi

Windows 11 + latest updates of Bridge and Photoshop (25. of November 22):When Photoshop is opened from Bridge - in this case I opened a jpeg - and then closed, it keeps running in the background under the Bridge session (see attached).If I repeat this - Photoshop at one point runs in several sessions - and typically the last one demands as much cpu as Bridge.After a few more openings and closings of Photoshop - from the same session of Bridge - Photoshop will not run, probably because memory is now unavailable.When these Photoshop sessions are shut down from the Task Manager, Photoshop starts all over - and this annoying behavior will repeat itself.I work on a laptop with limited memory but sufficient if Photoshop didn't keep running in the background with a new session each time I close it.Best,Eigil Skovgaard

I updated to Bridge 2023 from previous version yesterday and I am having problems working on the application, everytime I browse through my pictures folder the application keeps crashing, really annoying, I can't work on anything. Is anyone else is having the same problem?

I posted a few days ago to voice my disgust with the latest version of Bridge.  Having used it since... forever, with great satisfaction, I am now deleting it... forever.   It would take up many pages to list the defects.  This product is not worthy of Adobe.  I have taken up residence elsewhere.

This has been posted about before but I'm becoming inpatient and I see no solutions still. In my file navigation window I see two headers. "Favorites" and "Folders". In "Folders" I see "Desktop" and "This PC". Whenever I move or rename anything in a folder in "This PC", "Desktop" is expanded and the view jumps back to the top of the window and I have to renavigate to where I was. Is there a solution to this coming soon?

When a second content panel is present, the inactive panel should be dimmed to indicate that it doesn't have focus. Currently, the selected thumbnail and content panel do not change appearance, so there are multiple selected thumbnails in multiple panels which is confusing.

I encountered a small bug in Bridge 2023. In the Metadata Panel I usualy hide the Placard. I also like to expand the File Properties. Before Bridge used to remember my settings. Now every time I open Bridge the Placard is back and the File Properties is collapsed.

The Show Error Log checkbox doesn't stick when checked.

comment récupérer mes fichiers manquants dans mes collections

 Certains de mes dossiers s'affichent avec un picto flèche. Je ne peux visualiser ce qui a à l'intérieur.Je ne comprends pas pourquoi. Merci de votre aide !

Bonjour à tous,Bridge ne s'installe pas entièrement même après plusieurs heures, les vignettes apparaissent et la génération des prévisualisations ne s'achèvent pas, si je clique sur une image, un mot-clé à attribuer ou rechercher il marque '(ne répont pas)'.Je l'ai désinstallé puis réinstallé après un redemarrage du PC mais sans succès.J'étais sous W10 et je viens de rénover mon PC (nouvelle carte mère, carte graphique, RAM 16Go etc...) et installé W11 mais le problème reste entier !Si quelqu'un peut m'aider ça serait super, merci d'avance.PapyGribouille 

Is there a way to have file folders listed in numerical order 10, 11, 12, etc instead of 10. 100, 101. . . They are listed in numerical order in content panel

I'm trying to view raws off my new camera and the new bridge cannot even generate the thumbnails before it crashes now. I have been able to break my work folder down itnto small 100 image folders and bridge can handle that. If I adjust an image in camera raw then apply the settings to say 100 images then send them over to do a workflow it will not write no matter what destination I set for the workflow. Yes we have restarted it hit ctrl+alt+shift and cleared everything, uninstalled it and reinstalled in. I have completely factory reset the computer and reinstalled it and it still acts very poorly. I can open the full folders and view them with just windows so its not the machine lagging but bridge. We uninstalled the newest version of bridge and it is now processing my workflow. Is anyone else having these problems with the updated version? For now I'll be using the old one. 

Does anyone know how to get the Photo Downloader to see the Sandisk CFexpress type B card reader with a Sony CFexpress card? Both Adobe Bridge and LR Clasic see the card reader and card, and can access it. iMac 2012 running Catalina 10.15.6 Is this anything that can be fixed on my end? If not, where do I submit a bug report? Thanks.

Bridge Version 13.0.0.562.Windows 11.Folders in Favorites Panel are not showing the file system path as they used to in V12.I have my images in folders by category and each category has subfolders by year.Now I see lots of folders labelled 2022 which makes it very difficult to see which is which.I can see no way around this.

Help meI cannot longer download images from the card, Bridge says the app doesn't workI've Win 10 and vers.13.0.0.562 I uninstalled and installed the program several times but it doesn't workwhat can I do?