Bridge

Issue: If I select multiple files e.g. 100,  stored in a OneDrive synced folder (even if the files are stored local - green tick) and set a tag or give a rating, then some files are always not changed. Bridge version: 15.0.4.534Operating system: Windows 10 24H2 (Build 26100.4061)File Storage: In a OneDrive synchronized Windows folder, where the files are synchronized locally (“Files on demand” is disabled, i.e. all files are synchronized locally and have a green tick)Error Message: An error occurred during writing metadata in/to xyz.jpg (Caution, translated from German) Steps to reproduce:Prepare 100 files in a OneDrive Sync folder, make sure that all files are synchronized locally and have a green tickOpen Adobe BridgeSelect any view where you can select multiple filesSelect multiple files e.g. 100Add a tagNote that not all selected images have the tagRepeat steps 4,5 until all files have the tagPause the OneDrive synchronisationSelect all files

Bridge 15.0.4 crashes everytime when trying to labelling, rating, writing metadata in Macos Ventura.It happens everytime since I updated to this version.And won't open .cr3 files in bridge itself.  

Revisé una carpeta con fotografías de hace más de un año y veo que Bridge no lee los archivos .xmp con la edición de las fotos.He leído algún post en el foro con gente que ha tenido el mismo problema. Necesito saber el porqué, si se puede solucionar y qué hacer para que no vuelva a pasar, ya que precisamente son muchas fotos de un trabajo anual muy importante.En el disco duro donde tengo ese problema hay algunas otras carpetas con fotografías con otras fechas con el mismo problema. Lo curioso es que dentro de esas carpetas, en algunas subcarpetas, no pasa ese problema, siendo fotografías del mismo día y editadas al mismo tiempo.

Will you please fix this multiyear problem that a user can not re-open a file that was previously "edited" in Lightroom.  All that happens is a message: "Previously added".  As if this is the point of Lightroom ... adding files. As a result of this message, the user now has to figure out the date, and then go pawing through Lightroom Library, where there could be hundreds of similar photos from that day in the Library.  It's a timeconsuming waste of time.  5 minutes. Why would a user want to "edit" a photo again? Adjust the color.  Re-crop.  All kinds of reasons. Just open the photo. Previous "edit" or settings applied is fine! JUST OPEN THE FILE. It's what the user wants to do. Re-edit. OPEN THE FILE. Lightroom knows where the file is in the Library.  OPEN THE FILE. Yes, I know there is no such thing as destructively "editing" a photo in Lightroom. It is not helpful to  turn this report into a discussion that Lightroom doesn'

Hi, currently experiencing an issue where after previewing a video file in Adobe Bridge in any way, whether that be through the preview panel or hovering your mouse over the file, it no longer allows me to rename it. Trying to rename normally (right clicking and clicking rename) comes up with the error "The process cannot access the file because it is being used by another process." Attempting to rename with batch rename does nothing; the files just keep their original names, and no error pops up. Closing the preview panel prevents it from doing this; however, even hovering my mouse over the file to skim through the video causes this issue as well. If I manage to right click the file and click rename or batch rename before the thumbnail begins to scroll through the video, then there or no issues and I can rename just fine. I am running the current version of Bridge on Windows 11 and have tried reinstalling, rebooting, and clearing preferences/cache. Any help appreciated.

Recently, IT installed a new server at our company, which contained our photo files. Since that time, we can't label photos in Bridge, and if we make edits in Camera Raw and click "Done," we get a message that says "Unable to save the raw conversion settings. There was a write permissions error." Everything works fine for raw photos located on the computer and another external hard drive. All updates have been made. Any thoughts?

The Photoshop 2025 startup script is not loading and is disabled in Bridge 2025. When I re-enable it and restart Bridge, I get this message (screenshot). I've deleted and reinstalled Bridge 2025 and get the same error. When I try the Pre-release version of Bridge I get the same error. What else can I try? Note that "I think" this behavior started after installing the latest Photoshop beta. But not exactly sure.   

Hello, I am encountering an error with Camera Raw in Bridge causing a runtime error and GPU acceleration to be disabled, denying me use of this feature. My graphics card is a Radeon RX 570 4GB. This error has only begun recently enough, and was temporarily fixed by reinstalling the drivers but this no longer fixes the issue. I have also tried using DDU to uninstall the drivers before reinstalling them however this was to no avail. When this error happens, the GPU usage spikes from 100% to 0% rapidly in Task Manager, and the memory usage remains constant at 3.8/3.9 out of 4GB The exact message displayed is"The graphics processor has encountered an unrecoverable error. Due to a run-time error, GPU acceleration has been disabled for the remainder of the session" ,  usually followed by an error from AMD stating a runtime error. When attempting to use the AI Noise Reduction feature in Lightroom, the message displayed is "Unsupported PhotoThe selected

I have files that I'm importing to my desktop from a USB and they were even keyworded on a different device. All the metatdata information apprears in the details pane of Windows Explorer, but in Adobe Bridge these new files are a blank slate for the metadata; even Creation Date and Modification Date. I can still add new keywords and such, but no former details exist in Bridge. Is there something wrong here? Am I just not understanding how something works?  

Using Bridge 15.0.4.534 on a MacBook Pro M3 Max 16" (Nov 2023) running MacOS Sonoma 14.7.6. I have written some text in the Description field (IPTC Core) that applies to a set of images but want to add individual metadata info in the middle of what is already there. When I click where I want to edit the text often, but not always, the cursor jumps to the end of the text after a moment. Same behaviour in the Metadata panel and in the Metadata window that opens with Command-I. Not a big issue but still irritating.

Preset shortcut keys for labels (cmd+6, cmd+7, etc. or just 6, 7, etc.) work fine during Full Screen Preview. However, if you change them to Custom buttons (with or without modifier), they no longer work during Full Screen Preview. They only work while not in Full Screen.For example, this does not work in Full Screen Preview (works fine as soon as you exit full screen):Basically my root problem, though, is that you can't zoom the image in the Preview Panel, only in Full Screen Preview. I wouldn't mind custom shortcuts not working in Full Screen Preview if only it was possible to zoom image in the Preview Panel without entering Full Screen Preview. Affected versions (at least):- Beta 15.0.1.409- Beta 15.1.0.595Affected OS:- macOs Sequoia 15.4- Windows 11 

Annoying behavior Bridge 2025 - attempting to single click images immediately opens them in Photoshop 2025. I am single clicking all the time... I just want to tag my photo's. (PC Windows 11) I need help to fix this issue please and thank you.

Guten Tag, ich habe eine grosse Fotosammlung die gut 10000 Dateien umfasst und gut 9 TB Daten enthält. Alle Fotos sind auf einer Festplatte in Ordnern sortiert. Nur gehen immer wieder bereits eingelesene Vorschau-Bilder von heute auf morgen verloren und müssen von Bridge neu eingelsen werden. Dies kann je nach dem, mehrere Stunden Zeit kosten, da die Dateien sehr gross sind (von 500MB - 6 GB). Es ist unterschiedlich wieviele Ordner jeweils betroffen sind. Bin ich vermehrt am Arbeiten, sind es einzelne Ordner. Bin ich mehrere Tage nicht mehr am Mac, dann sind meistens alle Vorschaubilder weg. In den Voreinstellungen habe ich gewählt, dass die Vorschauen nicht gelöscht werden sollen. Auch ist mehr als genug Platz reserviert, (500GB, benötigt werden 90GB, auf dem Datenträger hat es noch über 1TB frei). Beim durchschauen der Einstellungen habe ich auf alle Fälle nichts gefunden das dieses Phänomen erklären könnte. Auf dem PC habe ich dieses Problem auch, allerdings

I am a long-time user of Bridge and never experienced this problem before.  It began in the past few days. Bridge 15.0.4.534 and Windows 11 I am finding that, sometimes, but not always, a new file created in Photoshop does not show in Bridge. However if I close and restart Bridge the file shows. Also Tools>Cache>Purge Cache for Folder results in the file appearing. While the problem is intermittent, it happens frequently enough to be a nuisance. Any suggestions?

When viewing the folder contents in the Essentials Workspace, the content flows continuosly from left to right, requiring the use of the horizontal slide bar to see everything. Switching to the Folders Workspace will allow the content to wrap and fill the grid/view of the Content Pane.

Bridge freezes within five minutes from start. Windows 11. Everything updated. Computer log here. In swedish, though.  AppHangB1 seems to be the major thing Fel-bucket , typ 0Händelsenamn: AppHangB1Svar: Inte tillgängligKabinett-ID: 0Problemsignatur:P1: Adobe Bridge.exeP2: 15.0.4.534P3: 67f7d4d3P4: f09fP5: 134217728P6:P7:P8:P9:P10:Bifogade filer:\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER.4a78cb7d-324f-48c3-878c-e5af53935bce.tmp.WERInternalMetadata.xml\\?\C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppHang_Adobe Bridge.exe_8edaf247c6025ea822586be4720b876cae5f6fd_4cbea78d_cab_59d9a78d-6be9-4c79-8bbd-ee65fa79f597\WPR_initiated_DiagTrackMiniLogger_OneTrace_User_Logger_20240808_1_EC_0_inject.etl\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER.664ac157-59a6-40f7-aa9f-6861547a39d1.tmp.etl\\?\C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppHang_Adobe Bridge.exe_8edaf247c6025ea822586be4720b876cae5f6fd_4cbea78d_cab_59d9a78d-6be9-4c79-8bbd-ee65fa79f597\WPR_initiated_Dia

Since I installed the new version (Bridge v15), some of psd files are not displayed anymore. I unistalled the new version and went back in the old one (v14), but the bug persists. 

Version: 15.0.4OS: Windows 10 Pro 22H2Expected Behavior: I have the Rate 1-5 Star commands bound to my 1-5 keys. After selecting an image in the content pane so that it appears in the preview pane, pressing one of those keys should immediately apply the desired star rating to the file.Actual Behavior: When an image is selected for the first time, a small "Loading High Quality Preview" banner appears over the image in the preview panel. While the banner is visible, my keypresses to rate the file are ignored, even if pressed multiple times. This means that I have to wait 1-2 seconds on each file so that I can rate it, dramatically slowing down my workflow.Notes: This is not a problem when I use lower-resolution files or a faster computer, as the preview typically loads fast enough that the delay is minimal. The images I am experiencing delay on are ~40mb, 36MP NEF files loaded from disk. I have an i7-7700k and 48gb of RAM.

Batch rename isn't working even for a batch of 700 pictures. tried restarting multiple times.

This should be ignored, but there is no option in preferences to specify ignored locations.

I run Bridge 2024 and 2025 on my PC. I still run 2024 version as when I installed the latest when I start it it attempots to index my complete system..  Why is it indexing everything and not just the folder I am in.  I cannot find anywhere to turn this off? I don't want it thrashing my drive or even accessing folders it doesn't need to.. My 2024 version does not do this. Id appreciate any help. Thanks 

Hi,I have problems running Photoshop scripts in Adobe Bridge 15.0.3 (Batch & Image Processor). I always get an error message that "Photoshop startup scripts are not enabled" then I enable them and it is still not working (the startup scripts button get always disabled without me clicking on it). I have this problem since new updates (which were made automatically).I would be grateful for help!

Der gute alte Doppelklick scheint im Adobe-Workflow irgendwie unter die Räder geraten zu sein. Ob in der Dokumenten-Vorschau (zuletzt benutzt) in den Apps selbst oder unter Bridge: ein Doppelklick auf (Adobe-)Dokumente öffnet Dokumente in den zugeordneten Apps einfach nicht mehr.Hier hilft dann zwar immer noch das umständlichere Kontextmenü oder das Ziehen auf  die betreffenden Icons im Dock … aber: warum Bewährtes nicht beibehalten?Oder kennt jemand eine Lösung?(Bridge 15.0.3.525 Mac Studio, Sequoia 15.3.2

probleme sous Bridge de "," qui se transforme en ";"je ne trouve pas la solution pour avoir et surtout garder le virgule entre mes mots cles sous adobe bridge 2025, a chaque fois ils se transformes en point virgules, c'est un soucis pour moicordialement patricia problem with Bridge of ‘,’ turning into ‘;’.I can't find a solution to get and keep the comma between my keywords in Adobe Bridge 2025, every time they turn into semicolons, it's a problem for me.Sincerely patricia

Hello Community, When logging a new bug report, first, create a new post and select "Bug" under "Conversation type".     It's helpful to the Bridge team when the information in the report includes steps describing how they can reproduce the bug experience. Once we can reproduce an issue, then we can start to investigate a fix.    Use the template below as a guide for posting the most meaningful bug reports for the team.   Bug report template: Issue: A short description of the problem. Bridge version: Exact Bridge version on which you are facing issue. Operating system: Windows or macOS, and which version of those operating systems?   Steps to reproduce (Very important): In a numbered list, the exact steps are needed to reproduce the problem. ... ... ...   Actual result: What happened after the last step? Expected result: What should have happened after the last step?   * Optional, but useful: Upload a test file (can also be shared t