Bug Reports

The slider in the Comparison View is unusable. Only scrub or Go to buttons are functional. W11 B14

La opcion de mascara de objetos no reconoce ningun objeto ni persona

Steps to reproduce:Apply Warp Stabilizer to Clip Effect Analyzes FootageStabilizer bar goes from blue to orange briefly then goes red. Result: Not StabilizedExpected: Stabilized Footage Footage and sequence settings match. 1920x1080 29.97 drop frame. Its a fairly smooth jib shot to start with and I typically use warp stabilizer at like 5% to smooth out any minor bumps. System info    Application: Premiere Pro (Beta) v26.0.0.13    OS: macOS v26.0.1, RAM: 128.00 GB GB, CPUs (logical): 16

Elipse and Rectangle Mask tool not add keyframe automaticlly after I change position or size. Can't generate keyframes in ducking? -----System info    Application: Premiere Pro (Beta) v26.0.0.14    OS: Edition Windows 11 Pro Version 25H2 OS build 26200.6901 Device name TotoroProcessor Intel(R) Core(TM) Ultra 9 285K (3.70 GHz)Installed RAM 128 GB (127 GB usable)

Can not import SRT files to Premiere Pro beta v25.6.0 builds 101,102, drops a generic error message!    I have an extension called Kaps, that generates captions for videos.  BTW that is quite indifferent.  The thing: 1st I thought it's failure of Kaps, but no.  I tried with caption files and got the very same error.    So I saved the SRT in - ANSI - UTF8 - UTF8-BOM - UTF16-BE-BOM - UTF16-LE-BOM encodings, but none of them can be importd in the Premiere Pro project.   The error message says: "The importer reported a generic error." (see the attached screenshot). 😞    [thread moved by mod to beta forum]

hello everyonei have downloaded premiere beta on my PC and once i open it it shuts down immediatly i don't know why even that ordinary premiere is working fine in my pc

26.0 B13 W11 crashes very easily, e.g scrolling through project bin. All previous work is gone.

The clip extension tool doesn't work after updating to version 26.00.

Le bogue de l'étirement et de la diminution des plans dans la séquence montage est liée à la lecture sur un écran attribué dans préférences / lecture (j'ai 3 écrans). Si je ne diffuse pas le film en temps réel sur ce 3e écran, les fonctions normales d'étirement et diminution des plans dans mon montage sont rétablies

Premiere pro beta 26-build 13 crash.. when i use new transitions(not legacy) my project automatiocaly closed...i think that one before Filmimpact 

Cuando un proyecto es muy pesado se cierra inesperadamente

For operations that do not have a shortcut mapped to them there is no obvious place to click to add one. Once you click in the right place you see the box, but a blank shadow box would really help see that there is nothing there yet

The masking tool is missing in the new beta version 26 under opacity. 

je travail sur premiere, je fais des interview sur un intervenant portuguais et des que je transcris les sous titre le mode francais et bloquer et il fais les sous titre en phonetique francais du portugais et je ne parviens pas a changer ca 

it dosnt open edit tap 

es la primera vez que instalo esta opcion beta de premier pro, al seleccionar el videoclip corto de 5 segundos, busco y clickeo la opcion "object magic tool" y la ruedita del cursor se queda pensando y nunca funciona, necesito ayuda 

 i update premiere pro beta 26- build 11 in Windows 10 ......not showing Film Impact transitions and effect

In the image, I’m showing the Auto-Save folder of the project I’m currently working on. As you can see, every one or two days I create a new file, increasing its number as I make progress with the edit. So, I was editing in FAMTRIP_UCW_8_BETA.prproj (8), and yesterday I created a new one, FAMTRIP_UCW_9_BETA.prproj (9), where I worked for most of the day.Manual backups:Autosave: Today I discovered that I can’t open either the manually created “9” file or any of its autosaves. The message that appears is the one shown in the next image: However, when I open the previous manually created file (the “8”) or any of its autosaves, they open correctly—although they’re way behind in the edit and missing a lot of the work I did later.So, I copied the “8” file (the manual one that still opens), renamed it by adding “RECUPERADO” to its name, and when I tried to open it, I got the same error message again.Then I tried another method: I opened FAMTRIP_UCW_8_BETA.prproj (8), went to File →

When using the Premiere Pro Beta object mask tool on a multicam clip, if multicam is set to CAM 1 it tracks CAM 2 instead.M4ProPP Version 25.6.0 Beta(Build 102)MacOS Tahoe 26.1

Hello, I’d like to report a bug I encountered in the Premiere Pro Beta version. When I use the program panel on my second monitor, the screen disappears and closes after a while. This issue occurs whenever I open a new Windows folder or any other application on that monitor.Best regards.

In previous versions of Premiere Pro, when I selected a clip in a bin and navigated to another folder, the selected clip would remain highlighted when I returned. This slows down the workflow significantly. I watned to submit a request that this comes back. Also, I am in icon view.

Up to now object tracking has been working very well. Now it seems with this build it no longer tracks. I am working with some people preforming a concert reading on stage and in the past I could select the people as an object and it would track them through the whole clip. Now it just does not track well at all. I am using nested multi camera clips. If you select a person to apply an object mask convert that mask to an opacity mask then track it. It will either blow up really big or just devlove into nothing. Seems to still work if you go directly to the source clip but not in the multi camera nested clips. It was working before just great. I have attached some screen shots so you can see the intial mask then what it does as you step through the tracking. 

Hi, I’ve found a consistent issue in the latest Premiere Pro Beta version. When “Enable Mercury Transmit” is turned on (to preview the timeline on an external monitor), I can’t trim clips normally by dragging their edges in the timeline. The clip only shortens or extends a few frames at a time, and then stops.I have to release and drag again repeatedly to make any further change.As soon as I disable Mercury Transmit, trimming works perfectly again.  This happens with all clips, even those without effects, proxies, or AI enhancements. Steps to reproduce: Enable Mercury Transmit and choose an external monitor.Try trimming a clip in the timeline.The trim operation becomes laggy or unresponsive.Disable Mercury Transmit → trimming works normally.System Info: macOS 15.2 (24C5022e) — or replace with your exact OS versionMacBook Pro (M3 Max, 16 cores, 32 GB RAM)Premiere Pro Beta (include your build number here)External monitor connected via HDMI/Thunderbolt&n

Beta build 47 I'm sadly on a Windows 11 machine that has a smaller monitor and I need DPI scaling on for me to see what I'm doing. It's currently set to 200%. This seems to be an issue in the current stable release, too, but I've noticed it in the BETA and figured staff might be more active here?The timeline marker and CTI are on the same frame, but they're offset by a pixel. Not too bad, and I'm sort of used to this slight misalignment.The CLIP marker though, that's off by two pixels when fully zoomed in. Makes me worried it's misaligned in time, but it's not. It seems to just be a display issue. Likely exaserbated by DPI scaling set to 200%. Note: I have not enabled Audio Time Units in years, so I'm pretty certain that everything is truly properly aligned in time, and what I'm seeing here is just a display issue.

Adobe Premiere - 25.6.0 BETA. ****PLEASE ESCALATE Hi - I've been using Adobe for 20 years.  Never seen this.Both options not working. Trying to drag 4k footage into a 1920x1080 sequence.I tried numerous projects + different videos + multicams - all do the same. No matter what option I choose - I always have to scale it down.  PLEASE HELP. Please NOTE:  In PREMIERE 2025 (25.2.3) - it DOES work.  This Beta needs an update.