Bug Reports

I have created an object mask that tracks in a short sequence.  A Gaussian blur is applied to the masked area. The mask was created by drawing around the item on the first frame of the sequence, and then using imbetweening across the rest of the sequence frames.  This works perfectly - the tracking is awesome. There are 2 issues:Within Premiere, playback is corrupted (lots of flashing colours across the full canvas). When you pause playback, this settles and shows everything correctly (including the mask and blur).When exporting the sequence to a video, the object mask and blur are ignored (entirely absent).  Exporting individual frames (as BMPs) works correctly. System spec:Arm processor: Snapdragon(R) X Elite - X1E80100 - Qualcomm(R) Oryon(TM) CPU (3.42 GHz)64GB RAMWindows 11 25H2Version 25.6.0 BETA (Build 102)

After masking and tracking an object with the latest tool in the object (which works suprisingly good and smooth), I can not change the opacity of the mask unde this tool. The opacity slider moves but does not do anything. Help pls :')

I’m trying to run a plug-in built with the UXP framework in Premiere Pro 25.6 Beta.When I load the plug-in using the UXP Developer Tool, it runs correctly in Premiere.However, when I place the plug-in folder directly into~/Library/Application Support/Adobe/UXP/Extensions/and try to launch it via Window > UXP Extensions in Premiere, the plug-in doesn’t appear.In the UXP Extensions menu, I only see options like “Browse Plug-ins” and “Manage Plug-ins,” but not the plug-in I placed manually.How can I make the plug-in appear in the UXP Extensions menu without using the UXP Developer Tool?Also, I’m wondering: now that UXP Extensions are available, are classic extensions (CEP) no longer supported?

Editing 4K footage in a 1080p timeline.Scale set to 50% (as in Fit)100% wireframe is showing in the Program Monitor with Direct Manipulation set to OnSuppose this is more of a bug as moving the clip around makes it the clip all jumpy.Putting all the clips in a new sequence solves the issue temporary.W11 pro26.3.0.9 

Pop-up windows blocked, there's nothing you can do once this happens. 

When dragging playhead through the timeline with the mouse it gets stuck on every cut when Selection follows Playhead (SFP) is turned on.After each cut I need to grab the playhead again.When SFP is turned off there is no issue. W11 Pro26.3.0.2

Using the current Beta version in multi-camera mode, as I drag the scrubber across the timeline the scrubber stops at each segment boundary. I have to re-grab the scrubber and pull it into the next segment. Also when I start up the Beta version, there is a message saying that there is an update available. When I attempt to update the message is that the update is not yet available.

Hi everyone,I just started using the Premiere Pro beta to test out the new object tracking feature. No matter how long I wait, it gets stuck at "Initializing" and just keeps spinning.I've confirmed with multiple other users that they are seeing the same issues. My setup: Windows 11, Premiere Pro beta 26.0, GPU 5080, CPU Ryzen 9800X3d. The footage is from an iPhone 17.Things I've already tried: clearing the media cache, converting the file to ProRes, and nesting the clip before tracking. Nothing seems to work. Does anyone have any ideas? 

Premiere Pro (Beta) freezes after each minor editing action (selecting or moving a clip on a track, zooming the timeline, etc.). Each freezing may take from 1 to 5 minutes, so I can’t edit my videos well. This happens even in simple projects with 2-3 tracks and without complex effects. system info 

Adobe Premiere Pro Beta peeps! What up? Y’all ship so fast, it be all like Cutty Sark up in here.I originally posted in Premiere Pro by accident and the version has already updated to v26.2.0 but the issue remains. Transcribe works great for 98% of the words but I need to edit the 2% of words it got wrong. But I cant. I go to the transcript panel, double click to edit a word, change it. Click out because enter just creates a line break, and sometimes the edit doesn’t take. Thanks for looking into it, I love editing via transcript. It makes everything so much easier, especially with filler word removal. But also, it would be nice to create my own dictionary, I edit a highly technical podcast with a lot of abbreviations and jargon. I’d love to able to teach the transcription tool the words it almost never understands… but maybe it’s learning from my corrections. If only they would take... more reliably.

Steps to reproduce:When you click on any color window to open color picker dialog Premiere 26.2 (build 24) instantly crashes.System info    Application: Premiere Pro (Beta) v26.2.0.24    OS: Windows v10.0.26200, RAM: 31.82 GB GB, CPUs (logical): 24

On export:  Some object masks are offline and will be ignored. How to find these masks and reconnect? The mask folder is filled with files with ' impossible'  file names.   I went thought the entire project and could not find any offline object masks. I did make several but deleted them from the timeline before going to export. 25.6.0.92

After opening  Premier in 25.6.0 Build 31 (Beta), Mercury Transmit doesn't transmit to the monitor.I have to go into Preferences | Playback,  just click OK, and it starts working. (Didn't have to change anything because the proper monitor is still selected.) I thought it might have to do with the beta upgrade, but it fails after the app restarts, and works again after the reset.Graphics card is nVidia 5080.  On Windows 11. 

I’m experiencing the same issue others have reported. I can’t open an Adobe Premiere Beta project—the application crashes immediately upon opening the file.I’ve tried all the troubleshooting steps listed in Adobe Support, and I don’t use any third-party plugins, so that’s not the cause. At this point I’m completely stuck and unable to work.Since switching to Premiere Beta, I’ve been running into a new blocking issue almost every week. Right now, I’m literally unable to do anything but wait for a fix. This is extremely frustrating, especially on a deadline.Any guidance or workaround would be greatly appreciated.

Under “Opacity” and the others effects the Mask option is disappeared. 

When I try to open Premiere Pro Beta 26.2 I get the splash screen and then nothing opens. I've updated all my drivers, rebooted, uninstalled and reinstalled, and ran as administrator. Nothing works.ThanksWindows 10ASUS MB64GB RamNVidia Ge Force RTX 2070

I uninstalled the software but it doesn't work

Spell checker does not detect errors.Version: v25.4.0.66macOS Sequoia 15.5 and 15.6 (BETA)Apple Mac mini M2 ProSteps to reporduce problem:1. Create a new sequence2. Enter text with obvious spelling errors in either graphic mode or caption3. View text in text workspace4. Select Spell Check from actions list5. In Spell check settings, select language and check box6. Note that spelling errors are not detected 

I’m using new mask on an hour long clip that’s nested in a multitrack.  It’s inserting slides on a screen. Unfortunately, audience members heads encroach the screen area just a bit, so I have them masked in a sandwich timeline (base video | slides | masked video (copy of base)). It looks great, but when I go to the multitrack, it’s sluggish as all get out.So I decided to render the sandwich timeline, and it says it’ll take 12 hours to render. It’s all CPU rendering, and the CPU is only being used 35%. 1-2% activity on the GPUs, and disk write speed of about 1.3KB/s.  I noted that tracking the mask over the one-hour timeline took almost 4 hours.This is not acceptable. System info    Application: Premiere Pro (Beta) v26.2.0.18    OS: Windows v10.0.26200, RAM: 63.79 GB GB, CPUs (logical): 16

I am using a masking pen tool and try to adjust the shape with keyframes. Keyframes seem to be created but they register no shanges to the shape. I have tried resetting etc but nothing works. 

I am getting the duplicate frames indicator in the timeline even when I don't have duplicate frames. It happens when I might move a clip or edit it in some way. Not always. But twice today it happened. And I just updated today.System info    Application: Premiere Pro (Beta) v24.4.0.23    OS: macOS v13.6.0, RAM: 128.00 GB GB, CPUs (logical): 20

The animations in “Film Impact Dashboard” start in the middle, not from the beginning.ERROR

Las animaciones de texto de “Film Impact Dashboard” empiezan en la mitad y no desde el inicio.VIDEO

Hey Guys, I'm trying to export this effect as shown in the program view where the background of a dancing couple is b&w and blurry but when I export the mask gets ignored completely and the effect is added to the whole clip. Program view: Exported clip: Efffects settings:

I have been editing in premiere for 10+ years and this might be the worst update ive seen. Keyframes for the  mask tool dont work at all. The AI mask tool doesnt work at all and it broke the whole tool. I cant even do a simple hand animated mask. Adobe is way too big of a company for there to be problems like this with essential tools that we've had for decades. These are the things that make me want to abandon these programs. It is my fault I started this project in the beta version though i guess. Cant even revert to another version.