Camera Raw

Hey all,I've been having issues with my photo exports since the most recent CC update.There's an increase in noise, and as you can see a pixel grid, for some reason.The firmware on my camera hasn't been changed or anything so I can only assume it's an Adobe issueI'm getting the same result VIA Lightroom Classic and Photoshop and I haven't changed my workflow, so it's not anything I'm doing differently.Canon 7DmkiiWindows 10Any help or advice is very much appreciated!

How do I keep the image from flipping when I convert my gpr (gopro) raw files to dng?

I recently updated. I used to be able to select multiple files in Bridge and open them all at the same time in Camera Raw. All of the files would be displayed on the left side in the Camera Raw window. After updating I can only open one file at a time in Camera Raw.Is there a setting somewhere to change this so that I can open multiple files in Camera Raw? 

I have Photoshop CS4 and Windows 7 Professional 32-bit.  I just got the EOS R and need to read its CR3 output files.  My PS CS4 only has (according to Help-->Plugins) Camera Raw plugin 5.0, so cannot read the CR3.  Further, newer Camera Raw plugins aren't supported by CS4.At the end of the Adobe DNG Converter 11.1 Setup, it finds and fires up the old installation, version 7.3.0.71, and tells me "Click Finish to close Setup."When I search under C:\Program Files for "DNG" the only two files found are 1) the old binary at C:\Program Files\Adobe DNG Converter.exe, and 2) a sample file C:\Program Files\Adobe\Adobe Photoshop CS4\Samples\Doors.dng .I thought maybe the Setup couldn't overwrite the Adobe DNG Converter.exe without administrator priveleges, so I renamed it to Adobe DNG Converter.7.3.exe .  Upon re-running the 11.1 install, it now doesn't start anything, and the above DNG search still finds only the two files of before (with the old converter now renamed).Ty

Is there anything that can be accomplished with the contrast slider in ACR that can't be accomplished with the other sliders?...or is it simply a shortcut to do an adjustment with one slider that would otherwise take two or more?

Hey guys I am trying to upload RAW Format photo to CS6 and its not opening is the updated version not capable of this ?

Hi,I have a problem with my camera raw, when i edit my pics, at the moment i use any slider of the program. my pictures have squares dancing, just when i move the sliders.

Running Adobe Bridge v9.0.2.219 and Camera Raw v11.1.0.112 on a Mac Pro OSX v10.13.6.When I select a group of RAW photo files in Bridge, and Open them in ACR, and select the entire group of image files, and then make Adjustments to the files (Exposure, Contrast, Highlights, etc.), ACR only applies some of the adjustments to all of the files.  It will almost never apply a Contrast, Clarify or Saturation adjustment to all of the files; only to the first one in the list.  How do I get ACR to apply ALL of the adjustment settings to ALL of the selected files?  Thanks!  Mark W.[Moved thread from Photoshop forum to Camera Raw forum - Mod]

Just on on board PS CC 2019. Nicest ACR ever seen. I'm not a big aficionado but this was hard to ignore:- For first time, seems I don't have to always click Done, to make sure adjustments are safe. I'm seeing the change icons in the thumb previews on the left in real times. Is this new? Maybe just have not noticed before.  It's auto saving finally?- Faster, am I correct?- It seems to be creating duplicate, after cropping - backups in real time,  is this new? Does these stay around?- It is crashing a lot, and then says (are you sure you want to open 57 files?). Did it three times. So then from Bridge I had to redo my open in ACR again. But because everything is faster it's quick to deal with.- I'm puzzled with straighten tool. It says double click. I do that but nothings straightens.- Bridge is also finally fast. I posted about that, no response. Bridge has always been slow.

Hello,I am trying to download Adobe DNG Converter off of Google Chrome to a 2015 Macbook running on the latest Mojave, and I've downloaded it a couple times and when I go to open the app it says "“DNGConverter_11_1.dmg” is damaged and can’t be opened. You should move it to the Trash." I have no idea how to remedy this and can't seem to find anything online about it either. Any assistance is appreciated!

i have the latest PS, Bridge, ACR via my CC subscription and auto update. I also have the latest Mac OS update on my 27in iMacMy adjustment brush disappears and after googling I tried un-checking the “use graphics processor “ in the ACR prefs. That seems to bring it back. I also tried option h can someone provide clarity on what’s up. I didn’t have this issue before the last adobe updates

Hi all,I'd like to know if there is a way to record a Photoshop action which will apply ACR Automatic Exposure to the current layer.I have tried to record the action manually:Start recording...Merge Visible layersConvert to Smart ObjectCamera Raw FilterApplied Auto Exposure and returned to PhotoshopStop recordingBy doing this, the actions records only the values for that specific photo in the ACR Smart Filter, it doesn't record the "AUTO" settings.I know that the "AUTO" settings are not good for most photos, but I'd like to automatize this to apply to be applied when needed and eventually edit...Would it be possible?Thank you very much in advance for your help.

Hello everyone!wanted to use if conditionals in ACR, is that possible?for example: I have different presets for different camerasI don't believe actions are available in the normal Camera Raw but maybe as a plugin or something.Any help will be much appreciated!

Hi,CS6ACR 9.1.1win7 64 bit proOpening a shot taken on 18mm of my 18-40 Canon EFL lens on my EOS 70D body,  into ACR, I have the lens in the lens drop down but not the 70D in the model profile drop down.All that is there in 'profile' is the EOS 1D (which I dont have)  that is a full frame and mine is 1.5 crop.I select the 1D just to see what happens and the distortion remains.Its a photo of an aircraft held in my left hand at its wingtip and the port wing is distorted bigger than the stbd compared to what would be if shot on 40mm but I cant hold it that far away to use 40 ! Clearly 1D with its full frame profile is not helping much, but surely this drop down should show other EOS models.Where do I get to add the 70D and also my 20D to this ?If I open photo onto CS6 and go filter lens correction the camera bodies listed I see 50D but not 20D or 70D so again missing from there.Merlin

Test Envirment:CC2018+ACR11NikonCaptureNX-D1.5First:1.I Use Nikon Raw not compress format2.Ps open use Cameraw,workspace select Protophoto RGB，16 bit channel3.ps select work in Protophoto RGB4.Save as jpg,Srgb,select as bellow select high quality!I comapre acr +ps  jpg and nx-d jpg in ps,I add a curve adjustment layer above the photo to monitor, as you can see below is ps jpgFollow is acr+ps jpg ,Acr is default setfollowing is nx-d default set ,export jpg,that so smooth,no urglyJust found out by my own testI use following method：PS and nx-d all first export TIF(16),then save as jpg test.1.With Nikon NX-D   D750RAW- > TIF (16bit) - - > Ps save jpg, there is no problem in saving jpg.2.With ACR （16bit）D750RAW - PS --TIF (16bit)--->PS save Jpg, that is problematicCONCLUSION:The problem is in Cameraw decode for d750 Raw file.ALL source raw and jpg file in my baidu cloudy  you can download,https://pan.baidu.com/s/1zKUixpIeCmGZcIyFe043LgI hope Cameraw team can res

Hi. I regularly edit around 400 images or so at once and I'm aware of batch editing for various corrections, presets etc. One thing I can't work out is how to batch auto level. I highlight all the images then use the auto level tool but that then uses the first correction on all of the images and doesn't analyse each one individually. Help would be greatly appreciated.

How do i Fix this Issue

I have just purchased a Canon EOS 80D. My software is Photoshop CS6. It will not accept and show the raw pictures from my Canon EOS 80D. it is listed on the cameras that have been registered. I have tried the DNG download to accept all older cameras and that has allowed my other camera Canon EOS 600D to show raw images, but still will not show them from the Canon 80D?

I bought a new Canon SX 70 but i discovered that Photoshop elements 2018 doesn't read CR3 format.Its camera raw is stopped at 9.x release meanwhile I'd need 11.1 updated. Have you any info about next plugins releasing?

Recently I was playing trying to reveal a hidden text in an underexposed area. Camera RAW could not show it while other programs including the Preview utility in Mac OSX and Luminar, Exposure, Affinity and CaptureOne did it without problems. I have always thought that Photoshop and Camera RAW are the parents, the origin of the other programs, so it is hard for me to take on this problem that on the other hand may not be so serious.If I open the JPG file directly in PS and then I go to ACR, no problem the text can be seen moving some controls; but if I open the file directly in Camera RAW, it is not possible.I'm a Mac user and all the software involved is up to date.I attach the test file. Thanks in advance for your attention.Please feel free to see this 30 sec video

I cannot find a targeted adjustment for HSL in Camera Raw. I know there is one in Lightroom and thought they both had the same features. It is a very useful tool and don't see why ACR wouldn't have it. Am I doing something wrong, or is there not one?

Bonjour, je possède PSE13 mis à jour, ainsi que caméra raw.Je viens d'acheter le Fuji XT3, et impossible de lire les RAW/RAF? Je rame depuis 3 jours, et avant de passer à Luminar (qui lit ces RAF) j'aimerais trouver la solution pour rester sur PSE13. Si quelqu'un a la solution....un grand merci d'avance![Moved from Photoshop forum to Camera Raw forum, by Mod]

Trying to open some old files from a Leica Dlux 4 that have the .rwl file type.  Thos used to work.  Photoshop CC and Camera Raw are both up to date.  Error message says Photoshop does not recognize this type of file.

I recently updated PS to version 20.0.1. Previously when I selected multiple files in Bridge all would appear in the left side panel in  ACR and I could make global adjustments. Now after the update,  when I select multiple files in Bridge to open in ACR the left panel showing all files does not appear and each file opens one after the other only as the preceding file is finished. Is it possible to open multiple files in ACR and see them all and make global adjustments.

I started noticing what I thought was pixel corruption along one edge of DNGs processed with Lightroom Mobile 3.6 (Android).  I believe the edge corresponds with one side of the camera's sensor since the edge varies when I shoot portrait (left or right side) vs landscape (top or bottom).  The apparently problem would carry over into Lightroom CC and on to Adobe Camera RAW 10.1, but I didn't think much of it since the offending pixels were often cropped way as I finalized my shots anyway.  I noted the corruption in another post as it renders differently if I'm using hardware rendering (appears to be a color look up table) or software rendering (solid black).  In previews or on a mobile device, it always looks like the hardware variant (I don't know if you can disable hardware rendering on Lightroom Mobile).However, the 4.0 updates to Lightroom Mobile and Adobe Camera Raw 11 have caused new issues that are much more dramatic.  In some cases, the photos expose in