Camera Raw

Reposting as original likely was in wrong group. GPU acclerator gets disabled in Photoshop 26.4 when opening RAW file. Can open RAW files in Elements 2024. GPU passes compatible check and is enabled when first opening Photoshop. GPU driver up to date. Tried solutions in discussion group to no avail. Cannot find a "TempDisableGPU2 or 3" file. I have attached data logs as per one of the discussions.Windows 11, Camera Raw 17.2.0.2155, Nvidia GeForce RTX 3060Ti (32.0.15.7616) - 8 GB. Thanks in advance for any help.

Hi All. I'm looking for advice from a raw conversion guru on how to convert original Canon CRW files to DNG. I think the source files are from a Canon PowerShot A590IS dating back to 2010.Adobe DNG Converter doesn't want to play ball no matter what version is selected. I have managed to convert to TIFF online using Picflow but that isn't an ideal workflow - I've found 4726 files I want to convert!Some photo programs do open the original files (Adobe won't accept the file upload so it can be found here: https://www.dropbox.com/scl/fo/wzxx950u9nts3e83acscc/ACkKE422_13YXtuMnR5p4FA?rlkey=n87wk1njtfp064fajcumrpbky&st=9zieltwp&dl=0), e.g. Topaz DeNoise AI and Photomatix Pro 7, but I want my starting point to be in Lightroom after an initial conversion. If anyone has a solution to get me DNG files then please do let me know. Otherwise, I'll have to go the slower route via online conversion to TIFF in small batches. Cheers,KL

Hello community,I am experiencing serious issues with Photoshop 26.3.0 on Windows 11 when trying to open .ARW (Sony RAW) files. The application crashes and closes unexpectedly without displaying a clear error message. In the Windows Event Viewer, I see the following message:The program Photoshop.exe version 26.3.0.156 stopped interacting with Windows and was closed. To check if more information is available about this issue, check the problem history in the Security and Maintenance control panel.My System Configuration:Versión de Adobe Photoshop: 26.3.0 20250122.r.156 bfca642 x64Número de inicios: 3Sistema operativo: Windows 11 64 bitsVersión: 11 o posterior 10.0.26120.3073Arquitectura del sistema: Intel Familia CPU:6, Modelo:7, Versión:1, AVX2, AVX-VNNI, HybridCPU(8:12), HyperThreadingCantidad de procesadores físicos: 20Cantidad de procesadores lógicos: 28Vel. del procesador: 2304 MHzMemoria incorporada: 30424 MBMemoria libre: 19501 MBMemoria disponible para Photoshop: 23315 MBMemoria

Photoshop se congela cuando abro el filtro de camara raw, e incluso no llega a abrirse la ventana del filtro y todo se congela. Version de photoshop 26.3, la ultima, Camara raw actualizada a lo ultimo Si alguien sabe como resolverlo, agradeceria su ayuda

Desistalé el photoshop y volví instalarlo.Después de eso no puedo abrir archovos Raw.Me voy a mi cuanta de adobe y no me aparece el camara raw para volver a instarlalo.Alguien me puede decir que puedo hacer y a qué se debe esto???.El Bridge si me aparece.

Camera raw does not launch when attempting to open .rw2 panasonic raw file either from double-clicking or from an already running instance of photoshop.   I do not receive any error.  Fans spin up though nothing in task manager appears.    Began somewhere in late November or Early December of 2024.   Still continues to this day.   I hear it spinning up, but no error.   Lightroom Classic, however, opens it.  1. Photoshop Version Currently 26.3.02. Camera Raw Version 17.1.0.2100 Actions taken:1. Uninstall Photoshop; reboot; Uninstall Bridge; reboot; Rename each camera raw directory (under any adobe or common folder in both user folder/appdata areas (low and roaming) as well as in Program File and Program Data areas including the deletion of the plugin file Camera Raw.8bi; Ran Cleaner tool (photoshop not present, camera raw was...removed it).   REGEDIT - Searched for any instances of .rw2 (found 1...renam

Quite often, when I'm trying to draw mask in ACR (Select Object -> Brush Select) it pastes some random photo fragment in place when I'm drawing (I can't see what I;m doing). The artifact dissapears, when ACR finishes computing the mask shape.Raw files (Sony ARW, The newest version of CC, Win 11, i7-11700K, RTX 3090, Wacom). 

Camera Raw 17.1 no longer supports the HEIC format?I'm trying to open HEIC files in Camera Raw 17.1 to edit HEIC images captured with an iPhone 15.I have Microsoft's HEIF and HEVC extensions installed on my PC. I'm not interested in third-party applications to convert HEIC files to JPG. I would like to edit the images in their original format before doing any conversion.Camera Raw 17.1 preferences no longer show the File Handling > JPEG/HEIC option 

I just installed the latest Adobe Raw Converter 14.4 .... I placed three raw files (.RW2) from my LumixG9 mirrorless camera in a folder, but when I select that folder, Raw Converter doesn't recognize that there are any raw files in that folder?  I did rename the files from "_1014305" to "DavidF-4305" but otherwise I didn't change the file or it's extension.    Any ideas of what's going on? 

Hello there We use Bridge and ACR in our little two men company for our professional grading and editing workflow. We really really love how everything works together and how smooth the workflow is – also, since we use a cloud together/with our clients. The file management with xmp data is quick and precise and also the reason, why we prefere ACR over Lightroom.  Since we are grading images from morning until evening, we were wondering, how to optimize even more. That’s when i started to look for a midi controller to use in our setup. Unfortunately, there seems to be no easy way to have a setup. I found Loupedeck+ but this device only works, when opening an image in PS and go into the ACR filter which would definitely not optimize our workflow.  I think, adobe should do something about this – in the video editing business, this is standard (blackmagic for example). I bet, this would be huge!Does anybody have experience with Bridge/ACR/Midicontroller? 

Hello, I have a question regrding Color LUT`s.. Using latest Photoshop and CameraRAW/LR (2020). Creating adj. layers and editing the image than exporting Color LUT in PH works fine however when I want that .CUPE file converted to .XMP so this profile can be imported in CameraRAW and LR than I am not sure how to do this ? There was a trick to do this in CameraRAW by hitting the button in the bottom of the right side when in profile window means hitting "option" im iMAC and clicking on new preset than we could load this .CUBE from CAMERA RAW and it's giving me the same pop up not the new preset pop up where in you can import your .cube files. I was able to imported cube files in Photoshop using the lookup color by i dont know how to export this and make it usable in lightroom.May I ask why ? is there any other option to accomplish this task ? This is the video that I was following and wasnt able to give the option of creating new profile or preset by clicking the ALT butto

Bit of an odd one here...  Since updating to Camera RAW 17.2 I have a wierd problem whereby when opening images to edit in Camera Raw it IS NOT using the eGPU that I have installedwhen opening from Bridge (and in the settings the eGPU is not seen)... Before 17.2, it was... But, to complicate matters, Camera RAW 17.2 IS using the eGPU when opening images directly in photoshop (using the "open" command in Photoshop).... So handling of the eGPU is now seemingly different between Bridge and Photoshop (albeit I assume it is the same plugin) When I access the camera raw settings through Bridge I cannot see my eGPU, only the on board GP, and certain settings are not available using the on board GPU (not powerful enough)... In earlier versions of CR, I could see my eGPU as the one being used... On the flip side, when I access camera RAW settings from Photoshop, the graphics card support updates (first) and I can see the eGPU (and the functions work correctly).&nbs

I've converted jpg scans in the past to tif, and opened in CR but that is not happening now. Have checked all the settings. I opened directly in to CR not needing Bridge to do it, besides, there is no right click option to open in Camera Raw instead of PS in Bridge or anywhere.  I scanned to jpg, 1.2GB grayscale file converted to RGB (3x file size) 8bit saved as .tif. Not opening. I've done this before, it was not a problem before. What changed? What am I missing? None of the suggested shortcuts or myriad of ways suggested to open a file in CR work. 

Please allow for the user-defined arrangement of panels in Camera Raw - as well as in Lightroom.It is important to set the White Balance as the first step before using the sliders in the Light panel.The Temp and Tint sliders were until recently at or near the top, a far better position!Recently moving the Temp and Tint sliders into a Color panel and placing that panel below theLight panel is definitely NOT helpful.Rather than simply placing the current Color panel above the Light panel might be a little bit of an improvement over the present, but not nuch. Also, combining Temp, Tint, Vibrance and Saturation into a single panel may seem logical on some level, but it is highly ineffiecent.  A far better idea would be allowing the user to order the panels as desired! Similar to setting one's own Workspace in Photoshop.

My wife is a real estate photographer that shoots in RAW and makes heavy use of the ACR Enhance + Denoise functionality.  (Image sizes = 26MB - 5472 x 3648)The performance of this feature has never been great - But it has gone worse since about 2 weeks ago - It looks like she updated photoshop and all plugins round about the same time.  It currently takes about 2 minutes per image, but we've seen it sometimes take 15 minutes for 2 images. She typically does not process more than 20 images at a time - But even when doing only 5 to 10, the same issue is seen. I haven't tried to downgrade to an earlier version yet, but here are some steps I have tried so far based on other discussions:Photoshop, Camera Raw, NVidia studio drivers - All on latest versionsConfirmed there is no "Acronis Active Protection service" runningDisabled second GPU completely, but also configured NVidia to use High performance GPU for photoshop and sniffer.exeCamera-Raw Tech previews are disab

I'm not sure which is the correct place to post since I access the ACR Filter via Photoshop 2025. So, I posted under the Ps Community initially. Here's a link to the bug/issue that developed on Feb. 14 when I updated to ACR 17.2 & that I reported in that other forum just now:https://community.adobe.com/t5/photoshop-ecosystem-discussions/update-to-latest-acr-rel-17-2-changed-panel-positions-in-unfixable-way/td-p/15158086

Not seeing camera raw 14.5 in my ps filter after restarting and reinstalling. It's supposed to be compatible with my older ps5 version, for my new Canon R100. TIA for any help!

Anyone know of a solution to this?I get this when opening a raw file in photoshop, either by double clicking on file in explorer, or through photoshop's open menu, or when drag and drop file on photoshop. Have to kill photoshop via task manager.If I run camera raw on a second screen (e.g. projector for demo) and then exit camera raw and photoshop, the next time I open a raw file, camera raw uses the now disconnected second screen and photoshop is locked up. Reboot (windows) does not resolve, the only solution seems to be to connect a second screen again and move the camera raw window back onto the first screen. If no second screen is available (e.g. when travelling) then hard luck, no photoshop until you can borrow a screen to move camera raw back.

Hallo. Bis vor kurzem war noch ein KI RAW Profil zu finden. Wo wurde dies hinverschoben?GrüßeAndreas  

Update today to Camera Raw - loaded Bridge to use Camera Raw and can no longer see Geometry Panel

Yesterday I was happy with Photoshop and ACT everyhing worked as it has for ages. I was editing  a RAW file and had a crash to the desktop.Since then ACR and photoshop won't open a RAW file at all. "GPU Acceleration Required - Camera RAW requires graphics processsor acceleration to edit photos." The OFF option is grayed out. If I go to Photoshop prefs. Performance Tab. All is good Card Detected, Tick in Use Graphics Processor but in Camera Raw Settings Performance Tab:  ! "Camera Raw graphics acceleration is not supported by your system!" It was until yesterday!Use Graphics Processor is set to OFF and greyed out.Ive done a clean instal of Photoshop and a clean graphics card driver.Any Ideas what has happened? 

Hi, I'm testing camera raw and would like to connect keyboard shortcuts to a programmable keyboard (Contour Shuttlepro2 or XPpen ACK05).Usually to configure these devices you point to the program executable, but camera raw doesn't have an executable and therefore I can't find a way to set the keyboard shortcuts on the device.Is there a way to fix this and setup cameraraw in these devices?Thanks.

I did post this in the general forum, was advised to bring the question here, for more detailed information: My practice has been to edit a photo, including resizing, then apply sharpening as the last step. Now, I just noticed Camera Raw applies sharpening (default value, 40) before importing into the Photo Editor (Elements '21). WHICH WOULD BE BEST: a) as I have done, let Camera Raw apply its default sharpening, then I again sharpen as last editing step, after resizing; b) set Camera Raw sharpening value to zero (0 - no sharpening), then perform all sharpening as last photo editing step; or, c) Set Camera Raw to a desirable degree of sharpening, and do no more sharpening in Photo Editor ???PLEASE ADVISE In the general forum, I have received this response: Adobe Community Professionalcorrect answer Correct answer by MichelBParisAdobe Community Professional , 16 hours ago@josephunit2nYour question has been discussed widely 10 or 15 years ago by the programmers of ACR them

I have enabled the Distraction Removal feature in ACR, however it appears that this results in the disabling of the Enhance function.  I am attempting to process several old 6MP images from 2004/5 period, and after ebaling the distraction removal function, it ppears that the Enhance function is disabled, and thu you an't use both functions.  Any advice regaring this issue would be appreciated. (I am using Windows 10 with current ACR)

Camera Raw Starting to Super Slow After Tweaking a Photo For Like 1 Minute. Then I have To Close The PS and Run Again To Work. This is Really frustrating. Having This Problem Since Like More Than an Year. File Size is Around 80MB Since They are From A7Riii Camera. Video - https://drive.google.com/file/d/1S3heo3Ri6RqYWzh8Ya39ETDNsoNZfSSG/view?usp=sharingAnd Also Ram Uses Like 80% 90% For No Reason.  Like This Guys' https://community.adobe.com/t5/photoshop-ecosystem-discussions/photoshop-cc-memory-issues-recent-problem/td-p/13746368Tried Resetting The PS & CR Preferenmces But No Help.  My SpecsAMD Ryzen™ 9 5900X GeForce RTX™ 4080 16GB SUPRIM X (Not Studio Driver)Samsung 1TB 990 Pro SSD NVME32GB Ram Its a Shame That This PC Cant Handle This CR  Adobe Photoshop Version: 25.9.1 20240610.r.626 e3aae35 x64Number of Launches: 422Operating System: Windows 11 64-bitVersion: 11 or greater 10.0.22631.3880System architecture: AMD CPU Family:15,