Camera Raw

尊敬的 Adobe 团队：您好！我是贵公司产品的一名忠实用户，在日常使用中，我发现 Camera 滤镜中的锐化滑块存在一些不便之处。每次打开滤镜时，锐化滑块的默认值为 40。然而，在暗光环境下拍摄的照片，应用此默认值后，图像质量会显著下降，出现过度锐化的噪点与瑕疵，严重影响照片的观感与后期处理效果。为了提升用户体验，我诚恳地建议将锐化滑块的默认值调整为 0。这样一来，用户可以根据照片的实际情况与个人需求，自由地调整锐化程度，避免因默认值不当而导致的照片质量问题。特别是对于专业摄影师和对图像质量有较高要求的用户，能够自主控制锐化参数将极大地提高工作效率与创作灵活性。感谢您抽出时间阅读我的建议，期待贵团队在后续的产品优化中予以考虑并改进。如有需要，我非常愿意进一步沟通并提供更多反馈信

Hello, when I select multiple images in Adobe Bridge and in Camera RAW select all with Ctrl+A and click "Auto" button, only some images are applied auto adjustment...not all... do you now why?

I've been using 2 monitors until today. I bought one wide monitor and now us it (samsung). No prob removing the old two and plug and play on the new Samsung. Problem is I can no longer open camera raw from Bridge. This morning I cold with two monitors this afternoon I can't with one monitor. Coincidence??? I dunno!I have rebooted numerous times - Windows 11 only shows one monitor - the new one.Uninstalled and reinstalled all PS companion programs. Any ideas or help is appreciated. Yes, I like going straight from Bridge to ACR to PS 

Desde la ultima actualizacion que se le hizo al camera RAW de photoshop, mi computadora no deja de apagarse cuando abro este programa, unicamente se apaga cuando lo utilizo, me gustaria saber como quitar la actualizacion del camera RAW ya que presenta un gran problema para mi trabajo. 

I am a longtime Elements user. I recently bought a Canon R6 mark ii and couldn't get Elemnts 2021 with any of its updates to open teh raw files, so I bought Elements 2023, installed teh Raw update, and it still won't open the Raw files--I just keep getting an error message saying to install the Raw update. So I uninstalled everythign and tried again. Same result. After more than an hour on hold with online help, I am starting to get desperate. The Canon R6 mark ii is listed as supported; it is apparently the updat eitself that isn't installing or working correctly. Help. Thanks.

Hi, for the longest time I am having issue with ACR, that is fortunately just kinda quality of life thing. Scrolling through menus and filters in ACR is incredibely laggy to a point of me going crazy. Sliders are fine though, they are working fine.The video shown is on a fresh install, so no settings are changed. This is happening on windows 11 and it was happening on windows 10 before too.Any help will be highly appreciated. I am out of ideas, as I really don't know why it should lag on my system. Here is partial system info: Adobe Photoshop Version: 26.0.0 20240927.r.26 a733fda x64Number of Launches: 177Operating System: Windows 11 64-bitVersion: 11 or greater 10.0.22631.4317System architecture: Intel CPU Family:6, Model:7, Stepping:2 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, AVX, AVX2, AVX-VNNI, HybridCPU(8:4), HyperThreadingPhysical processor count: 12Logical processor count: 20Processor speed: 3610 MHzBuilt-in memory: 65277 MBFree memory: 41865

Hallo, seit heute Nachmittag habe ich das Problem, dass sich mein Camera Raw-Modul nicht mehr starten lässt. Es kommt immer die Meldung, dass eine GPU-Beschleunigung benötigt wird. Bei der Kompatibiitäts-Prüfung sind jedoch alle Punkte grün - somit ok. Die aktuellen Treiber für die Grafikkarte sind auch installiert.  Hat jemand dafür eine Lösung? Chris

impodsible d'ouvrir camera raw depuis la derniere mise a jour il y a 2 jours comment faire ? la version d'avant etait top je n'arrive pas a revenir en arriere !!

I'm working with Camera Raw (16.1) on Photoshop 2024 (25.3.1) and finding that consistently when saving images my menu bar will have a red overlay to it. Sometimes it's solid, sometimes it's patchy. Mousing over it causes it to appear, and disappear intermittently. All screen shots turn the entire bar red. I'm on a 2019 Macbook Pro running Sonoma 14.2 using a dual montior setup over HDMI. The red overlay is on both the Macbook display, and the external monitor.  It doesn't appear to be causing any issues with files saved, but instead is a graphical bug. Anyone else experienced this? or have a solution?

在使用液化滤镜和Camera Raw时会经常卡顿，在我电脑只运行Photoshop这一个程序时，我电脑的配置是NVIDIA GeForce RTX 4060 Ti，Intel(R)Core(TM)i7-13700KF，内存为64GB

When im finished editing in camera raw, select all and press open, it takes me back to bridge losing all my edits. I cannot figure out how to get it back to opening the images into photo shop help please!

NO ABRE LAS FOTOS NI DEJA DESINSTALARLO

Students and educators with temporary at-home access to the Creative Cloud desktop apps are unable to use Camera Raw. Users receive the following error message, even with Adobe Bridge, Adobe Photoshop, and/or Adobe Photoshop Lightroom Classic installed:  Camera Raw editing is not enabled.Camera Raw editing requires that a qualifying product has been licensed.

This is not specific to ACR but rather how Adobe generatres DNGs with ACR in the latest release.... I have noticed that when the DNG converter creates a DNG, Windows Explorer in Windows 10 crashes when you have preview thumbnails turned on which makes me think that the DNG converter software is not embedding a preview properly in the DNG that Windows Explorer can interpret. I have verified this problem is specific to Adobe's DNG conversion process (either using some function in LightRoom Classic that generates a DNG or using the DNG converter itself).  I have testerd with other DNG converters (like Iridient's X-Transformer for Fuji files and also the Nikon version of their software and there are no issues with thumbnail previews with those DNG files).  So this seems to be a problem with the ADobe DNG converter, with regard to DNGs it creates.  I've also narrowed this down by deleting ONLY the DNGs A work around for now is to turn off thumbnail previews, bu

I recently got CS4 Extended version of Photoshop and need to work on my RAW files, but they won't open. I can see the thumbnails in Bridge and when I try to open them Photoshop says they're "not the right type of document"...so...not sure what to do. I've done a ton of research and cannot figure out why these files are unable to open. I need help!

Using Photoshop verion 26.0.0 on my Windows 11 24H2 PC, I get an incomplete mask around my subjects.  There is a small but sharp border at the subjects that is not blurred.  This problem does not occur in the Masking section of Camera Raw.  Luminar Neo does not have this problem.

Hi! I need some help, with settings for colour (I assume) when editing RAW-images in Photoshop Camera Raw, version 17.0.0.2043. Editing colours in (right now) impossible, since the colouring looks one way in Camera Raw-mode (see image "photoshop raw-sRGB"), and another way when opened in regular photoshop, and then saved in jpeg-format (see the other two images).  How can I make the colours look the same when editing in Raw and opening in photoshop? 🙂 Big thanks in advance!/Lisa

hello,i've recently upgrade to camera raw v17, i've some problem with the panal, as i've no crop tool, no Ai denoise or Ai super resolution although i 've correctly activated Ai in camera raw parametersAnyone knows how to fix this problem?thanks

Hello,i've a problem with camera raw V.17, since i only have 2 profil that are showing: color or monochrome,impossible to find "adaptave profil beta" or any other adobe profil,i also have a bunch of "artistic " or "B W " profil but no "adaptive"...I don't find any way to import this profil, it should have been installed with camera raw v17 upgrade, right?thanks for helping

Hello there!   I have read and watched several tutorials on the 'Super Resolution Feature in Camera Raw.   No matter what I do, the 'Enhance' command is NOT there when I right click and nothing happens when I try keyboard commands instead.   I am using Windows and have a 64gb, Ryzen 9 set-up (the computer is not the issue here) This is not the first time Adobe have hidden their features with zero customer service ability so I am looking to you as google just brings up more tutorials that tell me to right click in Camera Raw....    THIS DOES NOT WORK!

I found a solution to the following, and thought I'd share (not sure what "conversation type"):  Maybe a no-brainer to anyone else, but I was trying to re-work a DNG file in Camera Raw 2024 that was previously masked in Camera Raw in 2014. The only masking options available were the old ones (brush, linear & radial gradient). None of the newer options, like selecting people, objects, etc.    However, if I selected a DNG file from outtakes of the same photo session that was never masked or otherwise adjusted, the new options WERE available. I've tried deleting the older masks from Camera Raw; that didn't make a difference.   A much too long chat with Adobe support suggested trying older versions of Bridge - no change.  Finally, suggested resetting preferences in Camera Raw, but I ran out of time, and wasn't able to continue the chat, (but asked to email the proceedure - have yet to get an email). That said, resetting preferences in Camera Raw for the file in

After the most recent update (15/10/2024) I cannot access my own camera profiles either in LRC nor Camera Raw. I have found a temp workaround for PS and that is to open CS2 files direct from PS rather than bridge.So annoying, why are these updates not properly tested before releasing to the public?

When I perform Noise Reduction in Camera RAW, it says there’s a waiting time of 19 minutes, and when I start the noise reduction process, the program freezes and lags. My processor is AMD Ryzen 5 3500, RAM is 8GB DDR4 3200 MHz, and the graphics card is Nvidia Geforce GTX 1650 4GB. I need support regarding this issue. My camera Fujifilm XT5 and my files .RAF. Avarage 40mb a per photo