Camera Raw

Al utilizar ACR, eventualmente (1 de cada 4 veces aproximadamente) da un error irrecuperable (ver archivo adjunto)Datos de software instalado:Windows 11: 2025-03 Actualización acumulativa para Windows 11 Version 24H2 para sistemas basados en x64 (KB5053598)Adobe Photoshop: Versión 26.4.1Adobe Camera RAW: Versión 17.2.9.2155Datos de hardware:Procesador Intel i7 10700 (8x2.9Ghz)Motherboard: ASUS H510M-EDisco SSD de 480GB + Disco HDD SATA de 1 TBMemoria: PNY 3200mhz (2 x 16GB)Tarjeta gráfica: Sapphire Radeon RX6400 

Ciao a tutti, con l'ultima versione di Camera Raw mi capita spessissimo di non trovare tra i profili colore a disposizione (colori, moderno, artistico...) i profili colore delle mie macchine Fuji (Astia, Color chrome, Velvia, Provia....). La cosa che mi manda nei matti è che a volte li trovo... Vi è mai capitato? Sapete come risolvere il problema?Grazie in anticipo a chiunque sia così buono da rispondermi.

When I use cutter in Camera Raw, how I can disable grid or change type of grid as in Photoshop? Maiusc+Contro+G doesn't work. In older versions of camera raw you could do this.

The Geometry tool in ACR doesnt work on images where the camera is not level. I usually use the Draw Guides option, but also have issues with the vertical options. It skews the image instead of rotating it before applying corrections. Any angled crop correction is either removed or applied after the tool has already skewed the image. Allowing rotate to be applied before geometry would fix this I think. Another workaround would be adding vertical and horizontal skew correction sliders. I shoot a lot of architecture and interiors and usually can keep my camera level, but the odd time I have to tuck the camera into a corner sometimes it gets angled a little. Pulling one of two photos from a shoot into photoshop (and then making separate save file) to correct this is a pain for my workflow.  Attached an example with just a rotation and then with geometry: draw guides applied

When I edit a RAW file in Lightroom, which creates an XMP file, and then convert that to DNG using the DNG Converter v11.2, all the edits get carried over to the new DNG file except the color profile.  This has recently become an issue for me because I am using the new Adobe Adaptive color profile much more.   Thanks, David  

Hallo. gibt es einen Download link camera Raw version 6.7 für photshop CS 5. Windows

So, I have another problem with ACr 17.1. Whenever I try to target a certain color and adjust it, I only affect the blue and purple sliders, even if I hover on another set of hues. After a certain time, the cursor lags, and my CPU is 100% slowing my workflow. 

Hi, it appears like, after applying Denoise to a raw file, the TAT (with HSL) is not working as expected. I haven't been able to find a previous report on this same issue, sorry if someone did and I couldn't find it.   The following video shows the issue more clearly (normal TAT behavior, then Denoise, then the problem):   https://youtu.be/zC9rlF9am9M   I'm using ACR 17.2 and Windows. ACR is being hosted by Photoshop 26.3.

PB GPU CAMERA RAW (CR) Depuis MAJ Camera Raw (CR) le 14/03/2025, avant, tout fonctionnait, maintenant Camera Raw est incapable d'ouvrir mes RAW Lorsque j'ouvre une image RAW (Nikon D850 ou Nikon D500) avec camera raw, voici le message : « La fonction RAW de la camera nécessite une accélération du GPU pour modifier des photos » Dans le menu « Aide » de PHOTOSHOP il est indiqué que mon GPU est compatible et détecté et toutes les cases sont au vert (dont DirectX 12.2) Lorsque je vais dans Photoshop, onglet Edition, onglet Réglages, performances, ma carte graphique est reconnue, la case « utiliser un processeur graphique » est cochée, et toutes les cases de paramètres avancés du GPU sont cochées. Lorsque je vais dans l'onglet «performances »  des préférences CR : Utiliser un processeur graphique : Désactivé Alerte triangle jaune : l'accélération graphique CR n'est pas prise en charge par votre système. M

The PENTAX K-3 Mark III Monochrome is a camera dedicated to monochrome photography. The image sensor of this camera does not have a color filter, so there is no need for demosaic processing of the RAW data.Now, if I load the RAW data from this camera into Lightroom Classic, will the built-in CameraRaw perform demosaic processing? Or not?If demosaic processing is performed, it may create noise that does not actually exist.This is related to the quality control of image data, so I am looking for accurate information.If possible, I would appreciate an official response from Adobe.Thank you in advance.

I have created a Profile (xmp file) using Spyder Checkr Photo for my camera. It is stored in the corect place: Library: Application Support: Adobe: Camera Raw: Settings. When I use the Import Profiles & Presets command in Camera Raw, it goes directly to the correct folder and the xmp file (the created Profile) appears, but it is grayed out. So I can't import it. Am I doing something wrong? I would like to have it as an option in the Profiles listed in the drop down menus. Thanks for any help. So I have figured out what is going on. The Profiles I created with Spyder Color Checkr Photo actually appear as Presets, not Profiles in either the ACR or the Lightroom interface. I have been reading up on the distinction between the two (Profiles and Presets), and they seem very similar. I still have the option of mulitple Profiles already part of ACR, and still need to figure out which is the best to opt for. I want the most accurate,  as I am photographing paintings. I know the v

In opening up a CR image edited 14 years ago (I’ve learnt alot since then) it shows the old dialogue box - I want to re-edit it, but with the current CR dialogue box - why isn’t this showing? - how do I access it? Thanks

The other day I updated photoshop on my Macbook, however it was having some issues both in Photoshop and Camera raw.Today I installed Photoshop 25.12.1 and so far it's going great, however Camera Raw stayed to the 17.2 version is there any way to install the 16.2.1 or 16.3 version?The only old version available from the adobe website is the 14.5 😞Thank you

Hi,  I am using the latest Photoshop (26.4.1 20250225.r.194 4c5f14b x64) version with camera raw v17.2, and when trying to open any Cr3 file, the app freezes. I have tried to reboot my computer, reinstalled photoshop several times, used creative cloud fix tool and tried to run user-diagnostics plugin to figure the problem out, but nothing worked.Any clue of what I can do? I've spent over 2 hours on this issue already.

I have major problem, whenever i try tu use camera raw (opening raw from bridge, or using camera raw filter from photoshop) the program i am using freezes, and te only way i can close it is by ctrl+alt+del. Already checked for nvidia update, didn't help. Don't know what seems to be the problem, the PS-Preferences-camera raw are set for full speed. help!  

I had to start a new thread as my attempts to respond to the original thread appears to be blocked due to the attached log files. My apologies if my responses actually were posted. I took David Franzen's advice (thank you David for the response) and updated the camera raw drivers. On rebooting, the appropriate GPU was enabled (Nvidia Geforce RTX 3060 Ti). On the first attempt to open a RAW file, the GPU was disabled. This repeats everytime I reboot Photoshop.As I appear to have problems attaching the Camera Raw Logs, I will try to post them separately. 

Je suis incapable d'ouvrir un fichier NEF  dans camera Raw, photos prises avec un Nikon Z50II. J'ai Photosop Elements 2025. Mise à jour faite version 2025.1 pour Windows. Je n'ai pas de problèmes avec les photos prises avec Nikon Z6II.  Jusqu'à maintenant l'aide d'Adobe n'a rien fait et a été interrompue.

https://support.loupedeck.com/ending-support-for-camera-raw Adobe please fix it.

I recently updated the latest versions of Photoshop 2025, 26.3.0, which includes Adobe Camera Raw 17.2.0.2155. I am also running Bridge, version 15.0.2. Today when I opened multiple images, either from Bridge or from the desktop, into Adobe Camera Raw, after a few images, the vertical film strip disappears, and through it I can see whatever program I was last in. If I click in that area where the vertical film strip should be, I go to that last program. So if I open the images from Bridge, I see Bridge, but if I open them from the desktop, I see the Photoshop home window.   I can switch to the horizontal film strip, and it appears below, but when I switch back to the vertical, that whole side of the window is missing, again allowing me to see through whatever is underneath it. I restarted bridge, and that solved the problem briefly, but then the film strip disappeared again, and subsequent restarts did not cause it to return. I then quit Bridge, and re-launched Photoshop

Hello All,I try this specific community ... no results in Photoshop community.The only answers I got were: - "crop tool never existed" ... nonsense!                                                   - "I have it" ... must be someone with an older version / before 17.2Here it is again:Since Feb 2025 upgrade (17.2) the crop tool is missing and the spot replaced by "Geometry", which has nothing to do with cropping. It's not there, regardless of using a jpg, psd, or other file. Any suggestions, please! Is it discontinued or am I too stupid to find it?? 🙂 Thanks

Buenas nochesTengo un problema al seleccionar mascaras en adaptable: RetratoAl seleccionar la mascara de ropa o textura de cabello no me selecciona y me sale un mensaje que "debo actualizar los ajustes de la IA" o que es "Necesario actualizar algunas mascaras de IA"Ya le selecciono la opcion de actualizar pero nada que se soluciona.Adjunto fotografias para que me comprendan mejor el problema y me puedan ayudar con una solucion.No encuentro una opcion en Photoshop donde me diga actualizar Ajustes IA Nota: Actualice los controladores graficos de la PC, pensado que es ese el error pero nada. 

prior to the last update of Camera Raw, there was no problem after chosing the crop tool dragging a selection and double clicking the selection to crop. Now that no longer works. Instead clicking and dragging just moves the entire window.