Camera Raw

Bonjour, Voici le problème auquel je suis confronté :- lorsque j'ouvre un RAW depuis Photoshop (via Camera RAW) et que je choisi l'option enregistrer sous : il propose bien d'enregistrer dans le dossier depuis lequel le fichier a été ouvert (par exemple si le fichier RAW se trouve dans le dossier E:\Photo\Animalier, il proposera alors de l'enregistrer dans ce dossier et je peux alors changer de dossier de destination) - lorsque le RAW provient de Lightroom via CTRL + E, lorsque je fais un enregistrer sous, il propose la dernière destination utilisée, quelque soit le dossier où de trouve l'image ouverte. Par exemple si mon dernier dossier est E:\Photo\Paysage et que j'ouvre une photo qui se trouve dans E:\Photo\Animalier, il proposera de l'enregistrer dans E:\Photo\Paysage.Avant je n'avais pas ce problème, il porposait toujours le dossier d'origine de l'image et non la dernière destination utilisé pour l'enregistrement. C'est évidemment un peu pénible de devoir toujours retrou

dobrý den, po aktualizacích se v camara raw zpomalil proces výběru předmětu (výběr trvá 2 minuty a více), před aktualizacemi to trvá cca 15 sekund. WIN 10, intel i5 2,3Ghz, inetl Iris 655, Ram32Gb. Zkoušel jsem i nově nainstalovaná okna, provedl jsem všechny aktualizace ovladačů

Hi.I'm having an issue with Camera Raw.When I'm done editing in raw, I click the open butten & instead of opening the file with no name changes, it behaves if I have clicked `open as a copy'. It appends `-2' to the end of the filename. Although this is not a big issue, I'd like to know how to stop it doing this.I've tried clicking the down arrow next to the open button & clicking the `open' text by itself, but it still does this.It just means I have to edit the file name when saving (I don't like to keep copies of the files).My photoshop is version 23.3.1 & the camera is a Nikon Z6. Can anyone help?

I've found lots of tutorials on YouTube of varying quality but I can't seem to find any on the Adobe website. Have Adobe not made any tutorials where they go through all of the controls in Camera Raw?

Ok, Masks might be fine when you want to fine tune a single image, but when I want to do 100 quickly, individually, the retouching panel and use worked well and quickly. NOW, I can't do any dodging burning, color correction, sky work, etc without a mask, that's a POS.  I don't have to have these shots spit shined, nut they do have to be balanced with lighting controls and shadow and hoghlight control which you have now removed un;less in a mask.  Why do you need to make it that How do I reload those controls to allow super fast editing?No, I don't do anything in Lightroom, everything is in CRaw/PS.

Canot open PSD files from bridge into camera raw.  Opens all others that I use.  What do I need to change? Thanks!

it's my camera raw control panel, and none complete button could be finded in this page.

Hi all, I have some problems with my new lens: As soon as I select the lens corrections both in LrC and Fotoshop, all images with that lens are transfered into a full-frame fisheye picture, no matter which focal lenght I used for taking the picture. If I shoot for instance a picture with 8mm with my Nikon FX-sensor cam (Nikon D780) with the desired result of getting a circular fisheye picture, the image is stretched out for a maximum visibility which is not the desired resulte in that case. Further more the lens correction of the image border is not working as desired - there's a blueish border when not using the maximum focal lenth of 15mm... Is there any chance that Adobe will  correct this in the future or should i disable the lense corrections for that lens? Kind regards and sorry for my poor english - I'm a native german speaker. Camera Raw is Verison 14.3I use MacOS 12.3.1  

My CR3 files open in Lightroom but not Photoshop. Lightroom, Photoshop, and Camera Raw are all up to date. The camera (Canon EOS R6) is supported. The images open in Lightroom just fine but Photoshop says they are unsupported. I get a few different errors. One says unsupported, but one says "Could not open _____.cr3 because of a disk error."  I have already tried uninstalling Photoshop and reinstalling it. That did nothing. Any other thoughts?  Strange thing is that the image works fine on my other mac, which is an M1. So it isn't the image file. What's going on.  iMac 2020 Intel Core i5MacOS 12.3.1

As the title states... Camera Raw is unresponsive when attempting to open RAW images from either an SD card or any images (RAW or otherwise) directly saved onto my computer.  Here is the info... ANY help would be much appreciated.Brand new MAC  with M1 chip.  Plenty of memoryAdobe CC, everything is updatedPhotoshop and lightroom have both been activated and usedCamera Raw filter in photoshop worksLightroom works (I prefer Bridge to lightroom)I've tried turning off the graphics processer. No luck and honestly is a dumb work aroundCamera Raw settings within Photoshop have been checkedBridge prefrences have been checkedBridge opens, all steps are seamless until attempting to open images in Camera RawI've tried clicking the Camera Raw button and just right clicking and selecting open in Camera Raw.No error occurs... just the spinning rainbow of death I am super frustrated.  This is unexceptable.  Thank you in advance.

I was trying to convert some .3FR files from hasselbald x1d. The original black level of 3FR file is 256, but the black level of dng is changed to 1028. Why is 1028? and is it correct? please take this photo as an example:https://www.dpreview.com/sample-galleries/4234210046/hasselblad-x1d-sample-gallery/3168873830 adobe dng converter version I used is 13.4.0.872

When done editing in CR wanting to apply setting & return to the gallery in Bridge (from where you opened the file(s)) — how do you do that without using the mouse?  I click "Done" because ENTER opens it in Photoshop. I already tried Ctrl-Enter and Alt-Enter.Windows 10; latest version of CR.

Hallo zusammen,ich verwende zuhause ein noch etwas älteres aber sehr gute Notebook unter Windows 7. Auf diesem Notebook habe ich Photoshop CS6 incl. Bridge installiert. Seit Jahren Bearbeite ich RAW-Dateien, welche ich zunächst im Bridge öffne und dann gleich zu Camera Raw über das bekannte Blendensymbol wechsele. Bis zu sony6000er  *.ARW Files hat das auch noch wunderbar funktioniert. Nun habe ich testweise eine sony Alpha 7Riii, aber deren *.ARW-Files kann Bridge nicht erkennen und öffnet folglich Camera Raw auch nicht. Was kann ich tun, ohne mir ein neues Notebook mit Windows 10 kaufen zu müssen? Bringt der Adobe DNG-Converter etwas und kann ich DNG-Files mit Camera Raw öffnen? Verliert die RAW-Datei durch Konvertieren an Qualität?Für einen hilfreichen Tipp wäre ich sehr dankbarViele Grüße, Enrico

Hello! I am attempting to create a profile in the dng profile editor, but am not having any luck using the color matrices tab. I keep getting an error that says "the operation could not be completed" when I try and adjust my white balance. I  get this same error when I try and adjust anything, but this is the function I really need. I did change my compatibility from camera raw 2.4 and later in lightroom, but that doesn't seem to matter. Any suggestions? Thanks!

Hello,when I opened Camera Raw, the program offered me to choose between two UI styles, new (New ACR Default) and old (Vertical Filmstrip and single panels), I chose a new one, but I don’t like it, now I don’t know how to choose the old style.Help me please change to the old style (Vertical Filmstrip and single panels).Thank you

I upgraded to a new macbook pro m1 max where I hope to solve my problem with adove bridge together with camera raw where it was always extremely slow with editing the pictures (the slides glitches and where not smooth, zooming in super glitchy)I upgraded, but I am still having the problem. I can't chat to someone from adobe and I really really want my problem to be gone. both happems with raw files and jpg's. Also when I open camera raw from photoshop it's super super slow. 

Is there any way to set the keyboard shortcuts for zoom settings in ACR to match Photoshop? Why is the shortcut combo for zoom to 100% in ACR CMD + OPT + 0 instead of CMD+1, for example? super annoying guys c'mon

I'm currently having a problem with using presets in camera raw. Many, not all, of my presets, have been reduced to just a spike in the histogram. I can on some presets see the changes on the thumbnail. Some presets still work, so its not all of them. I can't figure out how to escape this. Please fix this bug.

Hello, I've been working with a few of the DNG files from the new DJI Mavic 3 drone. There is a fair amount of pattern noise in the sky at default settings. This can create a moire pattern depending on the size the iamges is scaled to on the screen. Does Camera Raw need to be updated to support these files?

When opening camera raw I get a fatal error and the app just starts working on the integrated graphics card instead of the dedicated one. The GPU acceleration gets deactivated 😞I'm on the latest version of photoshop 2022 and also the latest version of camera raw. Already tried reinstalling but isn't working. 

Quand j'ouvre une photo en raw ca me fait ceci et je n'arrie pas a reduire le fenetre qui peux m'aider merci

I think there is a bug in the crop and zoom tools in CC Camera Raw ver. 10.1   When I click to start the crop, a defined rectangular box appears and merely enlarges the image within the box to fit the screen. No crop handles appear and I can't drag the tool begin the crop. This doesn't happen every time I open an image but once it opens and does this, I can't get it to stop unless I reboot my system. I've looked all over to see if maybe I'm missing a preference somewhere but I can't find anything. Anyone else have this issue? I'm using Window 7 Pro. Thanks!

I have 863 jpg files in a folder on the desktop and want to convert them into DNG's. However, in the Adobe Digital Negative Converter (DNG Converter) the files do not show up when selecting the same folder. Adobe has no solution for it except to re-start the computer and to ask this forum.Any hints would be helpfull - thanks.

The new Nikon Z9 uses newly-developed RAW (NEF) file formats that Camera Raw 9.1.1 doesn't recognise.  So I have to go to a Win10 PC, run DNG Converter 14.1 to convert my NEF files to DNG, then back to a Win7 PC to open them in Camera Raw 9.1.1 (I don't want to 'upgrade' to Win10, or 'cloud' software of any sort). But when opening the DNG files in Camera Raw, it won't perform lens corrections using the inbuilt lens profiles, even though using a lens that *is* recognised when I develop (unconverted) NEF files from my D750 camera.  I inspected the Z9 DNG files (plain text portion), and they *do* include the lens name (twice!), but Camera Raw doesn't recognise it. Can anything be done to 'fix' this issue? 

Hello Adobe Community,We are currently trying to completly automate our AI upscaling workflow for CGI image sequences. So far, our current workflow looks like this :Render 3D images at 75% of target resolutionManually open each image sequence in Camera Raw via Adobe Bridge and apply the Super Resolution enhancementManually run a Photoshop script to downscale the images to the target resolution (100%). This has be done since Super Resolution blindly double the size of the image, which is way more than what we need Our goal is to remove the need for manual intervention during step 2 and 3. We are looking for a way to automate it via some Super Resolution API or any other kind of script that would work inside a Windows environement. Is there such an API ? If not, what do you think would be the best way to achieve this ?