Captivate

I'm am trying to find out if it is possible to run Captivate inside of a closed network - one that has no outside conections. Is it posible for a company to buy a single license of Captivate and set up a license server or something so that th app does not have to phone home? Thanks for any thoughts you might have on this.

Hi There,I am publishing a piece of responsive eLearning using a Typekit font 'Runda' and 'Nimbus Sans'.When I upload it, the Typekit fonts disappear and the project reverts back to Times New Roman.I'm entering the appropriate domains on publish.What could I be doing wrong here?This is my eLearning hosted on reviewmyelearning.com - the font has dropped off and is displaying as Times New Roman.This is the eLearning within the Adobe Captivate program - I have under 10 type kit fonts with my free plan, which is under the quota.Here is my publish screen. Enter in 'Typekit Domains', I have included : localhost, *reviewmyelearning.com, www.reviewmyelearning.com, reviewmyelearning.com, https://reviewmyelearning.com/(I just entered all of the variations that I could think of - in case!)I'm new with using Typekit, any help would be appreciated.

Hello Madam/Sir,In my captivate test project there is a scenario where there are two slides (slide 01 & slide02). Basically both the slide audios from the respective slides should resume from where it last stopped. How to write a advanced action for this case. Explanation:Slide 01:a) On slide 01 apart from the next button there is a button (name: Goto_01 button) which is used to jump to slide 02.b) When I click the (Goto_01) button from slide01 it should jump to slide 02 interrupting the audio from slide 01 which was playing.c) And when I come back from slide 02 to slide 01, the slide 01 "slide audio" should resume from where it stopped. Slide 02:a) On slide 02 apart from the next button there is a button (name: Goto_02 button) which is used to jump to slide 01.b) When I click the (Goto_02) button from slide02 it should jump to slide 01 interrupting the audio from slide 02 which was playing.c) And when I come back from slide 01 to slide 02, the slide 02 "slide audio" shou

I have an external quiz that was created with HTML, JavaScript, and CSS.  I am able to view it by zipping it and dropping it on the page.  Can anyone tell me how to set the completion status, success status, and quiz score for the lms?  I've been stuck for a few days.

Hello, I am new to captivate and I need help in writing Advanced action for the below scenario.Explanation:a) My project has a scenario, where on the main slide there are 6 buttons with 6 popups on the main slide. And all 6 popups have 6 close buttons (X). Out of the 6 buttons, any 4 buttons should be clicked and the next button should appear.   

I am using Captivate 2019 to create a quiz with 21 slides and 19 questions. Any ideas on how to fix this problem would be very much appreciated!

In captivate project,1) There is a scenario when on the 1st visit to slide 01, the slide 01 audio should play i.e the slide audio should play.2) While on the second revisit to slide 01, different audio should play instead of the slide audio.How to write a advanced action for this? 

Hello I've used a variable in Captivate to solve the issues of blurred text. In Moodle, everything looks ok initially, but on refresh Moodle adds an extra character to the end of every sentence. I've attached a screengrab to illustrate the issue. You'll notice where a "0" is added. Anyone else experienced this? How to solve?

Hello captivate-experts ,I have now taught myself quite a bit about captivate and I still have one issue I cannot resolve.I want to load a java script library (Fuse.js - JavaScript fuzzy-search library ) and call functions from this.Unfortunately, I couldn't find any documentation online that describes how to include this .js library and call functionsfrom it (I want to call it after a learner clicks a button, from the regular javascript code window).I've tried code likeimport 'fuse.js';and after that I've tried to call functions and deliver an output (see code at the end of this article).I've also put the library into the folder: "assets\js\" of my published project. Moreover, I've tried to add itvia the Captivate GUI to my project, but the script file won't show in the gui.I would appreciate it very much if someone could tell me whether it is possible to use java script libraries and calltheir functions in captivate. And I would be even happier if someone could post me a link or give

Hi, I have a GIF that I downloaded from a image/animation site. It's set to loop. I imported it into PPT and it worked fine - kept looping. However, when I import it into a Captivate 9, it doesn't loop - just runs through one time. Any ideas why? What can I do to fix this? ThanksMichele

Hi everyone, I'm new to the Adobe suite - we've previously used Articulate's software, we have a lot of existing e-learning created using Rise. I was wondering if we are able to import SCORM packages from Rise to be further edited in Captivate (or any other app in the suite). Could you let me know if this is possible please? Many thanks,Rob

I've been trying to get gifs from Photoshop to Captivate, and I've been getting the error message "'File name': The GIF file contains errors" seemingly at random. I've tried exporting from Photoshop with dither and with no dither, 128 colors and 256 colors, big file size and small file size, with a .3 second delay and with a .1 second delay. The error message seems to come up at random. Sometimes I'll even redo the Save for Web (Legacy) with the same settings and it will work on the second time. I am not the person building the Captivate file, I'm just the video editor. Is there a best practice for creating GIFs for Captivate? Is there a setting I'm missing that is making the difference? Help?!

Hi, I want to create an Assessment Simulation, where I want to give a learner TWO ATTEMPTS with two different failure messages,, Messages could be.. First failure message.. This is incorrect. Please try again.2nd failure message. Its still incorrect, let me perform this for you. (This is first sceanrio where No of Attempts are 2 with 1 click box, I want both failure message different) is it possible to get two different messages for 1 Click Box? 2nd Scenario Since Two different messages will not come with a single click box as per my knowledge, so I have used a Two Click boxes for different messages with Timeline adjustment, but problem is that two Click Boxes are counted as 2 points in result page. as a result if there are only ten steps in Assessment simulation, final result comes with 20 points, and if I performed all 1st attempt correctly still it shows I did not pass the Assessment or if I performed 2nd attempts correctly than again not passed.So I would like t

I've read some comments about flickering but not sure if they are specific to my issue or if this is still an outstanding issue. created with Captivate 11.8.506, If I have an object on slide 1 eg. a shape which is static and then the same shape is also on slide 2 with an animation (eg alphato), the object flickers upon entering slide 2 and does not give a  clean transition between the slides. No transition effects  are applied to the slide or object. The flicker is not evident  when playing on the time line only when previewed in browswer. 

I have been tasked with testing our Captivate eLearning courses for accessibility using JAWS 2018. In the process of learning JAWS, I noticed that any variable output to the screen is read exactly as it is on the slide, i.e. Slide $$cpInfoCurrentSlide$$ of $$cpInfoSlideCount$$ is read as "page dollar sign dollar sign, cpinfoslidecount dollar sign dollar sign of dollar sign dollar sign cpinfoslidecount dollar sign dollar sign" instead of reading "page 4 of 21"If anybody has encountered this issue and found a solution, your help will be greatly appreciated.

In captivate project, On Slide 01(Homepage)(Point 01): There are 6 buttons, out of 6 buttons only button 1 is enabled, the rest all the other buttons are disabled. For example, button 2 will be only enabled when chapter 1 is completed, same is the process for all the other buttons. And the audio will be disabled on the second revisit to slide01(Homepage). Point(01) works fine at my end.(Point 02): Example If button 1 to button 5 is clicked multiple times they work fine, they all go to respective chapter slides and the functionality is working fine.(Point 03): The 6th button is for the quiz chapter when the 6th button is clicked for the 1st time it will jump to the quiz chapter where there are 4 quizzes, once these 4 quizzes are done they will jump to the result slide.(Point 04): After jumping to the result slide, I have created a next button, when the next button is clicked it will take me back to Slide01(Homepage) which has 6 buttons. *Issue Note*: If button 6 (quiz cha

Hey, I am trying to make a simple game on captivate. the Idea is that on a slide I inserted an image object and want to move this image if an arrow key is clicked.I inserted a klickbox and assigned it with a button. If the action was successful I run a Javascript code like below.Js code:var moveX = 0, moveY = 0; const speed = 10; var w = document.body.clientWidth; var h = document.body.clientHeight; var view_W = w - 110; var view_H = h - 100; window.addEventListener("keydown", Control); function Control() { let key = event.key; let figurePicture = document.getElementById('Image_401'); if (key == "ArrowRight" && moveY < view_H) { moveY = moveY + speed; figurePicture.style.bottom = moveY + "px"; figurePicture.style.left = moveX + "px"; } } The controle function seems not to. Is there a better way to realise this ? Any help would be appr

I am creating a responsive project with a TOC. I would like learners to use this training as a quick reference guide, so it is important for me that they are able to navigate to any slide using the TOC. However, the option to "Navigate Visited Slides Only" is greyed out and cannot be disabled.  Can someone help me with this? There are other options that are weirdly greyed out. I hope there is a solution to fix them. Here is another example of greyed out options: Thank you,AnaMOPS

After we insert videos (MP4s), we are getting a white screen such as this when transitions to the next slide (video). Any recommendations on how to fix this? 

I have recently updated certain parts of my PC and had to reintall my software again (a.i. Adobe Captivate).When installing I receive the messge that the number of intallations are exceeded and I should deactivate earlier one to install this one. But this is not the case. I am reinstalling the one which was deleted in the process of PC reinstallment.I have also looked on my account but could not find any registred/ activated programs. All gone.I know I have a dated program (CC 6, and Captivate 2019) but I do not understand why they are vanished from my account. The version I have works just fine and I have no intention of purchasing another one.Thus can someone please help on how to proceed further with this? Kind regars

How do I edit the feedback after a student has viewed all of the VR hotspots? Where can I locate that text field? Thanks!

Hello, I would like to ask about Thai alphabet in Adobe Captivate. The Thai vowels are overlap with each other when that word has more than 1 vowels. I already installed Adobe Captivate latest version (11.8.0.586) and already tried "Requires an indic composer for Indo-Arabic language support(for newly created projects only)" in Preference but still have this issue. I've attached for more understanding (First one is correct and second one is overlap).  And another issue is when I double click these quiz text in Master slide, I cannot change to Thai language. Is it come from the system so I can not change or if I lock this object by mistake? Thank you so much.

I would like to be able to pause a scrolling software simulation, or just not start the scroll until a certain point.  I know I can take a screenshot of that first part of the scroll and create a new slide, but I want to see if there is a way to pause it mid-scroll so that I might zoom in prior to restarting the scroll. Thanks for any assistance you can provide.  I cannot provide the file as it includes proprietary information.

latest update, 11.8.0.586NOT a Fluid Box style project. I fear this may be a simple question with a simple answer, but I cannot find an answer via Google for the life of me. I have a Master Slide I am using, a results one to be specific, that I need to translate into Brazilian Portuguese. Either via some magic translation feature or via editing the text, but I need it as a new saved Master Slide so I can apply it to many Captivates. I will still need an English results slide to apply to my english projects. I was able find something called the Master Slide veiw, but I cannot edit any of the text there. Just move around textboxes and buttons.

There are 6 buttons in the home page.Button 01:Only 1st button will be active for the learner, the rest of the buttons will be disabled. When the learner clicks the 1st button it will take the learner to the 1st chapter which has 4 slides, when the learner returns to the homepage after completing the 1st chapter with 4 slides button 2 should be activatedButton 02: After button 2 is enabled, the learner clicks the 2nd button it will take the learner to the 2nd chapter which has 5 slides, when the learner returns to the homepage after completing the 2nd chapter with 5 slides button 3 should be enabled.How to write a advanced action for this kind of scenario?