FrameMaker

What should I change in the reference page if I would like to generate a Greek index?

(FM12 on Win7)I see surplus end-of-flow indicators, on otherwise blank pages, appear in the middle of .fm files.Format > Page Layout > Pagination > Before Saving and Printing is set to Make Page Count Even. This is a requirement for publishing.But I expect extra pages at the end of the file, not the middle.The files use many insets and some conditional text. At one point, they had nested insets, but not now.Scratching my head about this one. Best regards,

At least since beginning of july 2015 the service of frameusers.com (framers) is down, not avaliable, dead. Does anybody of You something about the destiny of this service ?I had to re-assign my account and then got just one mail from somebody else who did the same - but there are no digests since that time.Is'nt the admin of that listIt seems to me that the mailing list frameusers.com is hosted at http://www.beyondprint.com/ which is run by Brad Anderson.Has something severe happend to him personally?Thanks for any straw on this matter.Klaus Daube

As previously stated in the thread: Bad instructions in the FrameMaker 2015 Help File, sections have been rearranged, and references poorly established, such that it is difficult to understand the procedure for working in structured FrameMaker.Despite the problems, I managed to discern what the text was trying to say, and I had created an application before continuing with subsequent sections. In particular, I had created an application using the following sections:Build a structured applicationCreate a DTDCreate a structured templateConfigure the structured applicationCopy the application filesAs noted in the previous thread, you can't create the DTD prior to configuring the application, so the order of these sections actually needs to be:Build a structured applicationConfigure the structured applicationCreate a DTDCreate a structured templateCopy the application filesNow, in the Configure the structured application section, I note lines (4) and (5), which state:4)Insert a DTD element

Hi,FM11. I can't seem to get the Delete() method to work on commands, nor can I retreive the proper CommandNum property. For example:cmd = DefineCommand(1111, "TestScriptCommand", "TestScriptCommand", "^q");alert(cmd.CommandNum);...the message box displays some other number, like 48 or something. Then, cmd.Delete() seems to have to effect, because the command stays active and remains on any menus where I placed it.the Command() callback works OK. It properly executes on 1111 for the command.

aaaaaaaargh …… Just received a document with a number of diagrams that need updating: imagine my distress at discovering they are OLE links to Visio files … I do have Visio, but absolutely no idea of how to open the diagram that I see in my FM10 document in Visio. Is this remotely possible, am I better off saving the document as .pdf and trying to rescue the graphics with Illustrator, or is there some better approach I haven't thought of?Thanks in advance!

Hello.Yesterday FrameMaker 11 suddenly stopped working on my machine. It shows the message "Adobe FrameMaker 11 has stopped working. A problem caused the program to stop working correctly. Please close the program." It does not create any error messages though, no .txt file in Users\AppData\Roaming\Adobe\FrameMaker\11. This happens whenever I open a FrameMaker file.I tried uninstalling FrameMaker 11, reinstalling, and updating to version 11.0.2.384. Same result with my existing book file and with a new book file.I'm working on Window 7 Enterprise, MUI, language setting English.Help, I need FrameMaker and ePublisher to create my Online Help.

Hi All,I have a table which has Anchor Marker on Page 1. Then Table Starts on Page 2 with Title, Table header and Table Rows (only 2 rows and other half of the page is blank); then Additional Rows start on Page 3.So how can I make my table starts with the Anchor Marker and not leave too much blank spaces???     Hope my question makes sense. Thanks.

I made a superscripts with euation from FM in my  title of datasheet   as "I2"which "I" is the big number and "2" is the smaller on the top right corner of I .In bookmark doesn't display it.What can I do

An updated version with fixes and some new features has just been released. See Kapil Verma's blog for more details:FrameMaker (2015 release) – Update 1 released « TechComm Central by AdobeThere also are updates for RoboHelp 205 and TCS 2015. See these blogs for more details:RoboHelp (2015 release) – Update 1 released « TechComm Central by AdobeTechnical Communication Suite (2015 release) – Update 1 released « TechComm Central by Adobe

I just typed a huge explanation and this stupid text box lost it!Question in title should be enough if you are an expert.

Hi, in FM 12, how do I Customize Output for HTML 5?With the Publish dock open, and having already generated output, I see that one of my FM styles has been given a 144pt left position in the CSS. While this mirrors what the FM style is like, I want to edit that to be 0 in my HTML 5 output.So, I:Right-click Responsive HTML5 in the Publish window.Choose Edit Settings.Click the Style Mapping tag.Expand the Paragraph list.Select the style I want to modify (in this case, GlossaryDefinition).Click Edit Style. The CSS Rule definition for p.FM_GlossaryDefinition dialog box opens.The problem at this point is that the 144pt indent, that I can see in the HTML source, is not evident in the p.FM_GlossaryDefinition dialog box. Now, I know I can edit a CSS somewhere, but expect it will be overwritten each time I generate.So, why doesn't the p.FM_GlossaryDefinition dialog box have settings that reflect what I see in my output?Thanks,Sean

I am working in structured Frame (DITA) and want to modify the fm-xref formats in my template to use the <Link> building block.It seems that <Link> and <Default ¶ Font\> are ignored in the following XRefFormat’s in structured Frame; all building blocks are accepted in unstructured Frame.<XRefFormat   <XRefName `Example Number plural'>  <XRefDef `<Link\>Examples\x11 <$paranumonly\><Default ¶ Font\>'>> # end of XRefFormat<XRefFormat

Hi there,I have to publish a Framemaker DITA structured doc in French.Everything seems to go fine except for small strings called "generated text" such as "Note" or "Tip" that still remain in English in spite of my setting the xml:lang attribute to fr-fr in the highest level of the ditamap file (as per C:\Program Files (x86)\Adobe\AdobeFrameMaker2015\fminit\ditafm\DITA-OT\xsl\common\strings.xml).Any ideas so I can get those strings to display in French?thank youpilou

MIF-washing, rebooting, uninstalling/reinstalling are not helping with this book. Our FM12 installation is patched with the latest. I haven't seen any other 'fixes' from Adobe.I've used FM off and on since 1996 and have championed it everywhere, but I'm seriously considering recommending another authoring tool.

TOC problem when tags pulled include sub or superscript. After the sub or superscript the link is dead. Any way to fix this other than manually copying the hypertext after the sub/super?

I have a document I inherited from a client.  It is messy in it's design, but it works for the most part.  When I save it as a PDF I have 4 links in my TOC that don't work.  I have looked at the document (different chapters) and can see no differences between the working links and the non-working links.  Additionally, ALL the links work in the bookmarks panel.  Can anyone provide any help?

Hi,I'm currently trying up update multiple text insets in multiple documents. The pathway is incorrect, and when select an inset and click update it also says that the file type has changed since the inset was last imported. Is there any way for me to show all documents where the new insets folder can be found, as I'm currently updating each inset's pathway manually. I'm using 2015, but am saving into 12. Thanks!

Is it possible to add color definitions (using Framemaker 2015) using an Adobe Swatch Exchange (.ase) file?I'm hoping there's a way, perhaps by adding a pointer in the maker.ini file, to these rather than having to manually add definitions for all the colors in our corporate palette.

How can I create a watermark in FM 2015?

Whether I AutoRun at startup, or wait and run manually when needed,I add a menu to the main menu bar with this://Create menuvar myMenu = DefineMenu("Daves_ScriptingMenu", "Dave's Scripts");//Get the main FM document menu, so we can//add our custom menu, then add it.var fmMenu = app.GetNamedMenu ("!MakerMainMenu");fmMenu.AddMenuToMenu (myMenu);. . . I add commands, etc. that are working.The problem is removing the menu when I don't want it there.I'm trying this code. It appears to run, but nothing happens. And there are nomessages generated in the Console.Notice I tried using the menu name as well as its label.//Get the main FM document menu, and then remove custom menu.var fmMenu = app.GetNamedMenu ("!MakerMainMenu");//Using LabelRemoveMenu(fmMenu, "Dave's Scripts");//Using Name//RemoveMenu(fmMenu, "Daves_ScriptingMenu");UpdateMenus();Can I get a hint as to what's up here?Thanks,Dave

Running FMv12 on Win7 pc.I keep adding a list of scripts to the Catalog, under Favourite [Favorites].After closing FM and starting it again later, the list is empty again.What to do so the list stays populated?Thanks,Dave

Has anyone experienced the following messages. I am using the latest Framemaker 13.XSLT Processor MessagesError at file C:\Program Files (x86)\Adobe\AdobeFrameMaker2015\structure\xml\S1000D\xslt\core401.imp.xsl, line 69, char -1, Message: Illegal character in opaque part at index 2: C:\Users\xxxxxxx\AppData\Roaming\Adobe\FrameMaker\13\S1000D\s1000dConfig.xmlError at file C:\Program Files (x86)\Adobe\AdobeFrameMaker2015\structure\xml\S1000D\xslt\core401.imp.xsl, line 53, char -1, Message: Document has been marked not available: file:/C:/Program%20Files%20(x86)/Adobe/AdobeFrameMaker2015/structure/xml/S1000D/xslt/core401.imp.xsl/../C:\Users\xxxxxx\AppData\Roaming\Adobe\FrameMaker\13\S1000D\s1000dConfig.xmlTransformation Successful.Thanks

I see this show up in several places, in .ini files, and have tried commenting-out a few instances. But I cannot determine which lines will do the trick.Thanks,Dave

I have my preferences set to open documents as tabs, but they all open and minimize themselves. This makes opening a large number of files practically impossible as you have to find each one under Window and click on it. Then, drag it to the tab area. This is FM2015...