Lightroom Classic

When I begin to process a folder of images in Lightroom, I first save the folder to my desktop. I then edit in Lighroom, and the edits are saved to the catalogue on the internal hard drive. Once I have completed the processing, I save the image folder to two external hard drives, and also save a copy of the catalogue to the external hard drives (note that I have never needed to use the backup catalogue). I then delete the folder on the desktop. Sometime later I may revisit the images to do further processing. I have realised that sometimes I plug the external hard drives into the D drive, and sometimes the E drive of my computer,  and wonder whether this matters - can Lightroom still find the images if the drive letter is different? Would it be better to have one drive dedicated to processing, and the other drive be purely for backup? Should I stop editing images on the desktop?

I have an extensive keyword lsit, with heierarchy.  In an older version of LightRoom Clasic, there was a command that would export this list to a text file -- it worked.  How do I do this in LR 14.5.1?  The LR Classic Help section goes directly to Adobe Bridge.

Freshly installed Lightroom classic. Noise removla leaves such a terrible stains on pictures. Any idea how to fix that or at least what is wrong?  

I'm looking for a solution to batch processing images where I can add white bordering and my signature/watermark inside the bordering, like shown below;Probably hard to see on this forum due to the white background, but the signature is sitting in a white border frame.Thus far I have done this process by taking the image to PS (if not already in PS) and then increasing Canvas size and dragging my PNG water mark inside and resizing and positioning it (ZZzzzz....)It's ok when doing it for a shot here or there, but I also do event work (paid and non paid), the non paid stuff I tend to always watermark like this, but if there are 20, 40, 100 shots like this... that means popping into PS for each and every shot (for this process) whereas it's quite feasible I edited things purely in LR (and used Syncing features) to be quick about things, popping into PS for this process for each and every shot kinda defeats the purpose. There has to be a quick way to handling this, even outside of LR/PS?Th

Al usar Luminar AI me ha desaparecido el plugin de Topaz en Lightroom classic. Creo que es un problema de Lightroom, no me deja usar el plugin de Topaz que en teoría no se instala, sino que teniendo el programa, ya se instala como plugin directamente.Necesito que me ayuden.Gracias.

Bonjour Savez-vous comment déplacer des photos d'un catalogue à un autre sans déplacer les photos ?   Merci   [since writing about catalogs, it seems to be Lightroom classic - moved to the correct community - Mod.]

What is the best way to use LRC on 2 computers/Macs ? Thank you for advising me.

I have some vintage photos (taken at least 100 years ago) that I've carefully tagged using facial recognition in Lightroom Classic CC. I'd like to share these photos with each photo tag preserved above each face with family and genealogical societies. In some cases, I have class or sports team photos, and identification of the individuals in the photo holds a great deal of value for the people I'm sharing the photos with. Is there any way of exporting people tags with associated faces to the web?

In the past (2 month and earlier - I used LR from more than 10 years) When I am on the map module, if I click on one picture, Lightroom suggest datas for land, town. and state.Now (ver 14.5.1) I have no suggest.I haven't change nothing in the parameters.What can I do ?Thanks

I have a message of and error of the modules when I open any catalog, Many technicians of Adobe had try to solve the problem by delete and reinstall the software and nothing is working, only when one of them install the version 13. All my recent work is on the new version so I can't use my catalogs.

Looks like I finally have to leave Adobe Photoshop Lightroom 5 running on Mac Mojave and go ahead with a perpetual monthly subscription to Lightroom Classic (Dropbox just quit supporting Mojave):1. Am I correct in that this would be the app that replaces the editing and organizing features of Lightroom 5 with its catalog method?2. Can I store the photos and catalogs on a hard drive or on Dropbox? (Or do I have to use Adobe's web server.)3. Will my Lightroom 5 catalogs transfer over? Note: I'll probably not transfer over everything  but start new catalogs in Lightroom Classic. However, eventually I'll want to update the platform for the old photos.Thanks

I’ve been using Lightroom since version 1.0, and I’ve never had to fight this hard just to get my files into the app. This issue has persisted for months and is now actively disrupting client work.Setup DetailsCamera: Nikon Z8 (RAW only)macOS: Sequoia 15.6.1Lightroom Classic: 14.5.1Import Method: “Copy” via USB-C direct from cameraSecurity Settings: Full Disk Access enabledGPU Acceleration: Disabled❌ The Problem Lightroom crashes instantly when I attempt to import images directly from the Z8. The crash occurs before I can even select files. The camera doesn’t mount properly in Finder, and I have to physically disconnect the cable to eject it. Once I manually transfer the RAW files to my drive, Lightroom handles them perfectly. So the issue is clearly tied to the import handshake—not the files themselves.Troubleshooting I’ve Already TriedDisabled GPU accelerationReset Lightroom preferencesCreated a new catalogTried importing with minimal previewsVerified camera firmware and macOS

Les transitions c'est toujours pas çà... Quand je selectionne un ciel dans un paysage, je dois souvent soustraire la végétation (arbres) et là ça se gate. J'ai un liseré blanc autour de la cime des arbres difficile à sélectionner. Si je pousse un peu à gauche le curseur des hautes lumière ou de la correction du voile, çà donne un effet pas très joli sur ce liseré. Avez vous trouvé une solution à ce problème ?merci d'avance de vos réponses  Transitions are still not that... When I select a sky in a landscape, I often have to subtract the vegetation (trees) and then it gets bad. I have a white border around the treetops that is difficult to select. If I push the highlight or haze correction slider a little to the left, it gives a not very pretty effect on this border. Have you found a solution to this problem?thank you in advance for your answers 

Hallo,ich habe drei sony Kameras; Alpha 7 III, 7IV und 7rV. Beide sind aktuell in der firmware. Ebenso WIN 11 und LR classis.Wenn ich mit der Alpha 7 III tethere. sehe ich in der "Kameraleiste" in LR classis neben dem Kameranamen die Schaltfläche "live" und daneben Verschlusszeit, Blende etc. - Das funktioniert alles prima. Wenn ich mit der Alpha 7 IV oder 7rV tethere fehlt in der Kameraleiste in LR classic jeweils die Schaltfläche "live". Sonst kann ich ohne Probleme alles beim terhering nutzen.An was kann das liegen, dass diese Schaltfläche bei den neueren Kameramodellen nicht angezeigt wird?Danke für Eure Hilfe

*Solved- Resetting preferences and deleteing all previews seems to have cured the issue.Looking for some help here. For the last few days, when I open LRc no folders or folder structure appears in my Library Navigation Pane, only a filter folders box is there. (see photo)I can go to catalog>all photos and everything is there, but under folders it's completely blank. I can go to Collections and all is normal and working there. Eventually it (slowly) fixes itself and repopulates the folder structure, but something is very wrong. When folders are missing, if I try to right click a photo I get no dialog box, no way to chose "show folder in Library". I have Windows 11 and Nvidia 4080, everything current and up to date including GPU driver. All other functions on my PC are perfect and Photoshop is functioning perfectly. Also today my LR crashed during a large export, which has NEVER happened before. I don't know if I should reset LR preferences or reinstall LR? Or is it maybe a corrupt ca

After lightroom classic has started any menu that I click on freezes Lightrrom completely.  Has anyone any idea how to fix this please?

Updated to macOS Tahoe 26.0.1. today and LR Classic will not play 4K videos even in Library mode - it grinds to a halt as soon as 'play' is pressed. Looking at Acitivity Monitor it shows VTDecoderXPCService taking up 2-300% of CPU resources. Play appears to continue in the background without moving the display and when it has finished the VT... file clears. Before this the laptop would play OK in Library mode but not really in Develop. LRC version 14.5.1 running on MacBook Air M2 with 8GB. Any fixes out there please or should I roll back the OS for now? Thanks in advance.Simon

Bonjour,Utilisateur de Lr je rencontre une difficulté croissante à la lecture des panneaux latéraux :Textes blanc grisé sur fond pas très noir, police petite ou automatique minuscules, énorme à valeur 150 (zone de travail timbre-poste)Malheureusement, au fil des années mon acuité visuelle a baissé (serais-je un cas isolé ?)J’ai remplacé mon matériel ( Eiso 24’’) par un 27’’ de bonne qualité, sans en tirer bénéfice.Le temps passant je vois mal (si j’ose dire !) comment assumer la fatigue et l’inconfort de la situation.Quelqu’un aurait-il une solution – Adobe par exemple  …Bien cordialement

 I wanted to export my images for my client but when previewing them, I noticed the color of the woman's dress is off from the proof in Develop. I haven't had issues in the past on any session before this one. Color space SRGB. Please give guidance. I have updated Lightroom after this screenshot and it is same issue. 

I have just installed LRC desktop from within my new creative cloud subscription.  I want LRC to use (migrate?) my Lightroom 6.14 catalog, but before I can look for the migrate option as suggested in some help searches I am being prompted to upgrade the LRC catalog or choose another catalog?  Not sure what to do and I am paranoid I will destroy my current Lightroom 6.14 catalog before it gets input to and then the default catalog for my new LRC desktop?     

Hi community Has anyone come across the issue when uploading a book from Lightroom Classic  to blurb where it immediately fails when trying to upload? It goes through all of the 'rendering pages' steps, but fails immediately when it starts to upload the cover. It produces a very generic programming language error: An internal error has occurred?:0:  attempt to perform arithmetic on filed 'chunk_size' (a nil value) I've seen 'workarounds' exporting to PDF and then sending to Blurb, but it's not really a workaround but rather simply not using the integrated upload feature. Uploading the PDF to Blurb seems to work okay, even if it does complain that the page size is slightly different (which it is able to auto-correct during the web upload process) Lightroom version: 11.4.1Mac OS: Big Sur 11.6.8 ThanksMichael 

Sorry for the lengthy post, but it has to do with the LensTagger plugin for Lightroom. For several years, I've been successfully using this to edit EXIF data for manual focus or legacy lenses adapted to a non-OEM camera (e.g., Leica M lenses on Hasselblad or Sony cameras). The plugin uses exiftool and is not exactly robust, but if you set up the path for exiftool correctly and use the plugin's workflow as designed, it works. After I installed LR Classic 14.5.1, LensTagger stopped working. I endlessly get Error 256 or 512 or some other codes once in a while that I don't understand. About the only thing I can think of is, this plugin uses the /tmp folder to write/read some files, and it looks like there is some issue with the LensTagger plugin logic under macOS sandbox / integration and permissions. (My macOS is Sonoma version 14.6.1.) I've given both Lightroom and exiftool Full Disk Access on my MacBook, but that has not helped. If anyone else has experience with this issue or if the Ad