Lightroom Classic

Hallo miteinander, seit einige Tage habe das Problem, ich bearbeite fortlaufend die Fotos teilweise auch mit KI genererator, und am Schluss wenn ich die Bilder exportiere, werden die Bilder in Original (unbearbeitet) exportiert. Ich muss die Bilder bearbeitungen aktualisieren und dann sofort einzeln exportieren, erst dann funtioniert, kann mir jemand helfen an was das Problem liegen kann? Habe Lightroom neu installiert und die Gallerie aktuialisiert aber geht es trotzdem nicht.

Can anyone with help?Why can Lightroom read all 300+ files on my SD card but Lightroom Classic only seems to find 2 photos? Last shoot it could read all with no issue but the time before I had the same problem, 500 files on the SD card but only 100 according to LRC. & when I tried the workaround of uploading the photos to the Cloud via Lightroom it freezes when syncing the photos to Lightroom ClassicThanks

Hi, Im going crazy over here. My .NEF files look like horrible .JPG files when i try to develop them in Lr, camara raw, etc.. i dont know what is happening. please help me!

Well I loved AI masks and the ability to batch edit for efficiency.  Now for some reason I have to 'update AI settings' on every photo after the mask has been copied.  I can't copy and paste settings of masks (only does one picture at a time even if I've selected more).  I've tried different hacks from these forums.  NOTHING!  I'd be so grateful for a solution.  It used to be that I could edit one picture with masks, the copy those settings to the following ten pictures.  Now for some reason it's not possible.  ANY suggestions welcome!!!  Thanks!!!

Hii work with LRC, on desktop computer, very strong  new computer.and LRC is slowwww...for example, i click a thumbnail in order to see the enlarged photo, it may take 2-3-4-5 seconds to update the big image. and sometimes it doesn't update. it stays stuck with the previous image. i click a new thumbnail and yet see previous photo.is there a way to solve it ?

Since the last update from 17 june 2025, I have difficulties sending my photos to PS from LrC. It takes minutes to send a photo to PS, but most of the time it fails and PS does crash from my Windows PC.

it is possible to split an HDR photo in all the photo that has been shotted? I would erase one of them because not on focus 

When an external or network volume is disconnected and later reconnected, the Metadata panel can sometimes still show "File not found" in File Size rather than the actual size.  I think this is another bug with the caching of metadata in "<catalog> Helper.lrdata". There have been three recent reports about this: https://community.adobe.com/t5/lightroom-classic-discussions/file-size-not-shown-for-files-on-network-drive/m-p/13588066 https://www.lightroomqueen.com/community/threads/metadata-says-file-not-found-in-the-file-size.46971/ (two reports)   The workaround is to exit LR and delete "<catalog> Helper.lrdata".   To reproduce:   1. Import a photo from an external drive with Add.   2. Exit LR, disconnect the drive, delete the "<catalog> Helper.lrdata" file, restart LR.   3. Observe that the photo is correctly marked missing and the Metadata panel shows "File Size: File not found":   4. Exit LR, connect the drive, restart L

LrDevelopController.getSelectedTool() returns "masking" rather than the documented "local_point_color" when masking Point Color's eyedropper is selected.   To reproduce in LR 14.2 / Mac:   1. Place these lines in the file "getselectedtool.lua" in the Scripts folder: import "LrDialogs".message ( import "LrDevelopController".getSelectedTool ())   2. Restart LR.   3. Open a photo in Develop.   4. Add a linear gradient mask.   5. Select the eyedropper in the masking Point Color subpanel.   6. Do the menu command Scripts > getselectedtool.   7. Observe the message dialog says "masking" (incorrect) rather than the documented "local_point_color" (correct):   Note that the SDK documentation indicates "local_point_color" should be returned:      

Calling LrBinding.makePropertyTable() in a script in the Lightroom Scripts folder always fails with the error:   "LrBinding.makePropertyTable: missing functionContext"   This prevents making simple scripts using LrDialogs. presentModalDialog(). It also makes it harder to file bug reports involving dialogs.    To reproduce on LR 14.3 / Mac OS and / Windows 11, place this script in the Scripts folder: local LrBinding = import "LrBinding" local LrDialogs = import "LrDialogs" local LrFunctionContext = import "LrFunctionContext" local LrTasks = import "LrTasks" LrFunctionContext.callWithContext ("X", function (context) local success, err = LrTasks.pcall (function () LrBinding.makePropertyTable (context) end) LrDialogs.message (tostring (success), err) end) LrFunctionContext.postAsyncTaskWithContext ("X", function (context) local success, err = LrTasks.pcall (function () LrBinding.makePropertyTable (context) end) LrDia

Pet peeve. Was LR developed by a bunch of 20-somethings? The fonts are too small for my 60+ year-old eyes! I have font size set to large in Preferences>Interface. This problem occurs throughout. Develop module is terrible, the letters are gray on gray, there's not enough contrast. Library module too, casn't read the file names in the extended thumbnail. And the extensions, absurd forget it! Take a lesson from Bridge, and make these fonts so people like me can read them. My vision isn't that bad, it's 20-30 and i wear reading specs. Even the damn Preference Panel makes me squint. This is such an unnecessary mistake that has been made. At least make the font color white instead of gray, you're sacrficing readabilty for design, which is the same as bad design. If the Develop Module used tabs instead of lines you could make the font larger. Just sayin'. Please rethink this, Adobe.

Do the updated remove tools replace at the original images full resolution?

I store my presets with my catalog, and that catalog is on an external drive that I switch up between my desktop and laptop when I'm traveling. All the presets show when using my desktop, but when I use my laptop and pull up the same catalog, a good amount of the presets are missing. If I import them again while using the laptop, then when I plug the harddrive back into my desktop, they appear twice. How can I get them to be consistent between machines? I thought that was the whole point of storing them with the catalog, but maybe I'm missing a step somewhere?

Remove reflections works with sony an nikon files but not my Olympus Raw Files (ORF).

In the Compare mode the Sync button next to the Zoom slider is greyed out and I do not know why. Two photos are showing, which is a common cause but not here.  Please see the attached screen shot. I am running LR Classic 14.3.1 on Mac OS 15.5. Any help would be appreciated. Thanks.  

The new AI People and Reflections detection features are not working. People is not detecting people and Relfections doesn't even appear to be an option. I have updated via My Creative Cloud Desktop app and uninstalled/reinstalled Lightroom Classic to no avail.  I've attached screenshots of a photo I was testing and how my Lightroom Classic interface appears with only the non-working People feature.

Por favor, me ajudem Meu lightroom está lento, a ponto de quase não conseguir editar. Na hora que ele está aberto, o notebook fica lento também. E isso só acontece com ele, outros apps como Photoshop e Premiere, não apresentam esse problema Versão do Lightroom Classic: 14.3 [ 202504141032-10373aad ]Licenciar: Creative CloudConfiguração de idioma: ptSistema operacional: Windows 11 - Home Premium EditionVersão: 11.0.26100Arquitetura do aplicativo: x64Arquitetura do sistema: x64Contagem de processadores lógicos: 20Velocidade do processador: 2,6GHzVersão do SqLite: 3.36.0Uso da CPU: 1,0%Fonte de alimentação: ConectadoMemória interna: 32508,4 MBMemória GPU dedicada usada pelo Lightroom: 23,2MB / 6010,0MB (0%)Memória real disponível para o Lightroom: 32508,4 MBMemória real usada pelo Lightroom: 971,4 MB (2,9%)Memória virtual usada pelo Lightroom: 894,6 MBContagem de objetos da GDI: 820Contagem de objetos USER: 3034Contagem de alças e processos: 2703Tamanho do cache de memória: 0,0M

Installed LrC but do not have the modules - Library, Develop etc. Can't access my photos from past years.  On a Mac running 15.5 Sequoia

It showed up when I first started using LRC.     Now all I have is Quick Develop.     Also, is there a dust and scratch remove tool?    Or do I just use Generative AI remove?    I'm working with old photos.   Thanks.

I discovered this today after a painstaking couple of hours. I am on the latest LRC 14.2. I am not going to bore you guys on how I found this issue but here it is.    Canon R6 MK2. Shooting RAW.    I was working on some wedding photos and was applying adaptive blur Circle to the RAW files. All the RAW files that had this adaptive blur were failing. Good thing I didn't apply this to all images so I was able to go over my steps and figure this out.    I didn't check all the adaptive blur types but this was annoying time lost as I had also done AI enhance on my images which took forever. It doesn't matter if you enhance or not, the issue persists just for the adaptive blur Circle. 

I don't know what my next steps are because nothing really works.     Here is the error rport Moderator: We’ve removed your pasted Crash Report from this post. Crash reports are of little use in a vacuum. It is far more important to submit the Crash Report with your email attached so it can be reviewed in full by the engineering staff. Additionally, posting this much text into a forum post breaks several forum features, including translation. Lastly, Community Experts are not likely to scroll dozens of pages to review the information here. If you feel you must post a report in addition to submitting it via the dialog, please use an attachment instead. 

Thank you for your understanding. 

Every time I have to start manually with a catalog in my documents folder, and I don't even know how it got there.  

I just can't get a photo to email in LrC. I've tried everything. I have a Mac fyi. It's a problem with the outgoing server I'm guessing.