Lightroom Classic

SystemLightroom Classic 15.4.1 macOS 26.5.2 Intel Core i5 iMac AMD Radeon Pro 5300 (4GB VRAM) 72GB RAMIssueSince updating to Lightroom Classic 15.4.1, Generative Remove has become extremely slow. Even a very small brush stroke (for example removing a tiny newborn skin blemish) can take over 4 minutes to complete.The standard Remove tool works normally.Troubleshooting completedI have tested all of the following:New Lightroom catalogue. Existing catalogue. Catalogue stored on internal SSD. RAW files stored on external HDD. Camera Raw cache purged. Catalogue optimised. GPU enabled. GPU disabled. Lightroom restarted. Mac restarted. Different images.None of these resolved the issue.I also compared the exact same RAW file and edit on an Apple Silicon MacBook running the same Adobe account. Generative Remove completed much faster on the MacBook.Most important findingI installed Lightroom Classic 15.3.1 and repeated the same Generative Remove test on the same Intel iMac.Generative Remove is si

It just won’t open.

Just spend a little time udating font settings and give us more control how the boxes display in library side. Show us you still plan on keeping us around in 10 years. I know it’s the idea to get everything to the cloud but problem is us old timers and maybe so now new comers are figuring it out, we don’t want our personal images on the internet on someone else’s servers. Who knows what will happen and all it takes is a wind storm to disconnect you from your entire life’s collection. Not permanently, at least not so far but shows you how easy this would be to achieve. Keep it local and keep it personal. Let us know you care about LRC please. If there was a single option like Capture One that could handle a 300k library as efficient as LRC, I’d move over in an instant. You should think about that and make that decision a little more difficult because Capture One or someone WILL eventually catch up (I Hope). 

It’s not that the thumbnails are slow to display; they never display until they are selected.  Images are stored on an external drive.  The catalog is on the iMac SS.

Hey, I read the best monitor for photo editing and decided to buy this one: https://www.monitor-picker.com/en-us/monitors/lg-27ep950-270-3840-x-2160-60-hz-monitor. Which one would you guys recommend me instead? My budget is u pto 700€

Ich habe in LrC ein Foto entwickelt, bearbeite es in Photoshop weiter. Für das daraus entstehende Bild werden die Entwicklungen in Content Credentials nicht angezeigt, weil ich Content Credentials so tut, als ob das Foto noch nicht bearbeitet wurde. 

LRC will not open

Hallo,  ich bin auf der Suche nach einer L R Classic Version aus 2021, da meine Mac mit Mojave leider nicht die neueren Versionen unterstützt. Kann mir vielleicht jemand weiterhelfen. Der Support hat leider nur die 22er Version. Diese läuft aber auch schon nicht mehr unter Mojave... Für Hilfe wäre ich echt dankbar...  

See horizontal and vertical line on right. half of the pictureThe artifacts (lines) became visible in a part of the pictured that I repaired with the Remove - Generative AI tool. The artefact only appears if Denoise AI is applied as well. Disabling one of them, makes the artefact dissapear. No other edits applied. Camera is Sony RX10iii, cRAW (.ARW file).Lightroom version 15.4.1macOS Tahoe 26.5.2

I have ~800 missing shoot-date folders that all need to be reconnected under newly created YYYY-MM parent folders. Is there any supported way to bulk update folder locations, or must Update Folder Location be performed one folder at a time?All the files and folders are present on the disk.  I just need to find an efficient way to tell LR where they are.  All folders in folder panel have question marks.I originally successfully moved the folders under new sub folders from within LR.  Unfortunately, the catalog I used for this got corrupted.  I have a backup catalog, but because the folders were physically moved on the disk, the backup can’t find them.   Many thanks!

Because of problems running LR CC with Tahoe etc I decided to changeover to a new MacBook Pro M5. Migrate the old Mac to the new will give deviations and is not advisable (mentioned in this forum).Is the only way to copy all details from old LR CC to a harddrive and paste them into the new LR CC new MacBook Pro M5?

The Denoise box the noise more aggressive and adds a lot of sharpness. How can I gently reduce the noise? We didn't have this problem before    

Lightroom Classic 15.4.1Windows 11 – up to date as of mid JuneAMD 7 3700X32GB MemoryGPU: RTX 2060 6GBNvidia Studio drivers 6.10.62 (June 16,2026)Catalog on C: - an internal M.2 SSD (NvMe) – 512GB with 130Gb freeCatalog holds 260K images, lrcat file is just over 5GB, the llrcat-data folder is just over 40GB (full system info below)Preferences:Use GPU for display – YESUse GPU for Image processing = YESUse GPU for Export – YESuse GPU for Preview Generation – NOEnable HDR in Library - NO  Symptoms:From time to time, Lightroom launches but does not appear on screen.There is no splash screen.Sometimes there is a single line banner approx. 1/3rd the way down the screen with white text on black, with a message ‘Loading Catalog xxx’.If you click on another application, then that banner disappears. Observations:Lightrrom is visible in task manager with low CPU and memory usage.The lrcat-wal file exists and is just over 4000Kb in size.On more than one occasion, I had this issue after the followin

I just did a huge camera upgrade this past week from a 5D Mark IV with the old Mark I EF 100-400L to a brand new R5 Mark II and the RF 100-500L lens. I do mainly aviation/airshow stuff. I often start my edits in LRC by just seeing what the auto tone suggests, it’s usually been pretty close on RAWs from the 5D IV. With the new camera it’s been very hit or miss, often drastically over or underexposing the images, clipping the blacks and highlights etc. Am I missing something here that I need to configure in LRC? Is it somehow expecting my old camera and applying the algorithm as if it’s that or something?Thanks, appreciate any help - definitely still just scratching the surface on learning the R5 II, I know things have changed pretty drastically with these mirrorless cameras vs. what I’m used to so it may be something I’m doing wrong.

Images from a synced Lightroom Classic (12.3) collection appear distorted (vertically squashed) when viewed in the generated web gallery.  This is consistent across browsers, devices, OS (but working primarily on Mac 13.3.1 and iOS 16.2).  I saw that there was a similar discussion from June 2022 but the proposed solution (check the metadate projection field for equirectangular) did not resolve the issue. Interestingly, when I access the collection on a mobile device, the images are distorted in the collection there (not just a generated web gallery).  However when I hard press on an image (a gesture that typically shows before/after states) the original unedited image briefly appears (as expected) but when it pops back to the current state, the distortion is gone. For background, these images were shot on a Sony a7iii with the aspect ratio accidentally set to 16:9 (versus the native sensor 3:2).  Once imported I batch reset the crop to include the whole sensor captu

I am trying to tether my Sony A7V to Lightroom Classic on my MacBook Pro.  When I try Lightroom just gets stuck trying to detect my camera.  I was able to connect my camera using Imaging Edge Desktop so I know it's not an issue between my camera and computer or my USB-C cable.  Both my camera and Lightroom are completely up to date.  I’ve tried following every tutorial I can find but I haven't found any specific to using the A7V.  My menu titles are all slightly different and in different spots than older versions of the camera so I’m not 100% sure I have everything set up right on my camera.  Since it is working with Imaging Edge though, I assume I am.  I’ve also tried deleting Lightroom Classic preferences on my Mac which I saw in a few posts with similar situations but the files I was supposed to delete did not exist.  Could it be something to do with my camera being a relatively new release?  I have only started being able to open RAW files in adobe in the last couple months becaus

Is it possible to create  a Searchable Prompt  in Lightroom Classic to select all files with specified maximum  dimensions or file size? 

I'm seeing a very strange Lightroom Classic issue and would appreciate any ideas.Lightroom Classic: 15.2.1OS: Windows 11SymptomsThe photos definitely exist in the catalog. I can find them under All Photographs. I can edit them normally. Show in Explorer opens the correct local folder. If I try to import the same file again, Lightroom correctly reports:"This photo has already been imported."However, when I select that folder in the Folders panel:Lightroom displays "No Photos in Folder". The folder badge still shows the correct number of photos. The status bar at the bottom says 0 photos.Example:Folder 2010 shows 6 photos. Subfolders 07 and 09 each show 1 photo. Selecting any of these folders displays no photos at all.Additional observationsGo to Folder in Library from a photo found in All Photographs doesn't jump to the folder. Instead Lightroom starts "Analyzing Photos" and appears to hang indefinitely. Running Synchronize Folder produced this internal error: UNIQUE constraint failed:A

필름스트립에서 일정 이상 가운데를 벗어난 위치에 있는 사진을 선택 했을 때 멋대로 스크롤되어 가운데로 옮겨지면서 사진 선택을 상당히 힘들게 합니다.설정 옵션이 있다면 끄고 싶네요.

I recently transferred Mac’s. My light room pictures transfer but not my light room classes. None of the pictures or presets. I need those presets for my business. They should have been stored in your cloud but have not. Do better. 

I cannot get my lightroom to open.I first noticed an issue when Lightroom Classic was not resuming at the previous pictures but returned  to a picture edited some days ago, however in other respects everything seemed to be working.  This may have started after the last update.It first failed to load after I had done a backup. I tried loading this backup and then a previous one but kept getting corupt catalogue message.I eventually got a backup from June 5th to load, though the catalouge had to be updated to the new format before appearing to open and operate correctly.  However on closing the program it would not open again.Since then I have reset preferences and reinstalled lightroom from the adobe creative cloud app, all without any change.Today I launched the reinstalled Lightroom with a new empty catalogue and imported an old catalogue (over 500000 pictures). It took some hours but after it loaded photos and then loaded masks it did open and appeared to function correctly.However,

Hoping someone can help! I have used Lightroom for 7+ years and this has never happened until yesterday… After I imported a session into Lightroom, I realized all the photos are extremely overexposed from how I shot them. When I open the RAW file outside of Lightroom, it is exposed the way I shot it (Pictures for reference). I shot these with the same Camera I’ve used for years (6D Mark ii) and use Lightroom all the time and have never had this happen to me until yesterday. I have googled, YouTubed, and attempted everything I could find, but nothing has fixed it. So I’m hoping someone here can help!! Also for reference I have tried rolling back to an older version of Lightroom… I have tried purging my cache… I have made sure I don’t have a preset turned on when importing… I have looked under preferences at camera defaults… Desperately trying to finish sessions, so all help and suggestions are appreciated!