Lightroom Classic

Since updating LRC in the last few days I can not upload images from a USB stick and I also can not save work from Photoshop into LRC -What am I missing? 

So far, I've gotten multiple different answers to this question, so now I'm coming to the experts for advice. Looking specifically at the new(-ish) UGREEN DXP2800 or DH2300 NAS systems, I want to see if I could set up my LrC Catalog and photos to be stored on the NAS with the capability of accessing on both my home PC (Windows 11) and my Macbook Pro (M4 Pro).  Currently, both my Catalog and photo originals are saved to an external SSD that I can swap between the PC and Macbook Pro. I want to store everything on the NAS, which would be located at my house, so that I have the ability to pull up both my Catalog and photos from anywhere. I also want to be able to have my edits saved to the NAS so that if I edit a photo on my Macbook, I can later pull it up on my Windows PC and pick up where I left off. Obviously, I wouldn't try to have LrC open on both machines at the same time. This is simply my idea for a portable workflow without having to plug/unplug an external SSD

I want to use the Folders Panel in Lightroom to move photo files from one location in the windows file system to another.  I know I must use the Folders panel in Lightroom, rather than Windows Explorer or Lightroom catalog will lose track of where the files have gone.  Normally I use 2 instances of Windows Explorer to move files.  One instance is for source, the other for destination.  I cannot use this technique in Lightroom.  And the Folders panel is really too small to expose two locations in the hierarchical file system to make effective use of drag and drop.  There must be a better way to use this but I don't see how. Tom

I am having continuing issues with working along in Develop when suddenly Lightroom will jump into the Map Module. Very annoying as it breaks the chain of what you are doing and you have to check what was the last thing you did that registered against the photo and get back to the right screen within Develop for what you are doing.   Worse still if you are not online, a message to that effect comes up in a big box in the middle of the screen and the only way I have found to clear it is to exit Lightroom and start again. I have to do a lot of editting Off Line as living full time roaming in a motorhome we do not have internet connection in some places. All the AI stuff has to wait till we have connection.

Is there a way to change the default Denoise setting?  50 is way too high - I'm usually between 15 - 20, at the most...  Or, should I just create a preset  and apply it on import?

On my MacBook Pro, LrC 15.0 is great in terms of features but it is impossible to import new pictures into the catalogue.  That makes it kind of useless.  I had to go back to LrC 14.5.1    

Hello! Something in my Lightroom Classic corrupted itself again so I'm rebuilding all of my previews. For some reason, the photos from my Sony RX0 II don't automatically generate previews. The preview will generate if I actively select a photo and wait for it to get created, but doing the Library > Previews > Generate Standard-Sized Previews command just hangs.  Individually selecting photos is not a great solution because I used this to make timelapses and I'd rather not sit here at my computer pressing the right arrow every second for hours.  Is there something else I should be trying? I'm having other issues with previews but this is one that seems most actionable. System Info:Lightroom Classic version: 14.5 [ 202508061311-4cef2162 ] License: Creative Cloud Language setting: en Operating system: Windows 10 - Business Edition Version: 10.0.19045 Application architecture: x64 System architecture: x64 Logical processor count: 24 Processor speed: 3.6G

I am trying to upload a multiple page web gallery of over 200+ images in Lightroom Classic and only the first page loads.  When clicking from first page/index to next page/index nothing happens.  "translation available" appears in address bar.  Suggestions?  And thanks.

I have uploaded many books created in LR Classic to Blurb. As of September, I have been unable to upload a created book to Blurb. I have tried the PDF suggestion, and was successful in making a PDF, but not uploading the book to publish. I have contacted Blurb. They say it is a bug/ glitch at Adobe end. The book will not begin to upload to be published.I found a plug in suggestion online, and downloaded it but it is for InDesign. I do not plan to purchase another app simply to upload a book.I have restarted, and looked for updates. I have contacted support at Adobe, but the wait was so long, I abandoned the effort.Very frustrated. Has anyone has this issue?Thanks,Shirley Burris

Ik had voorheen een watermerk op mijn foto's. Deze had ik een keer uitgezet en sindsdien krijg ik deze er niet meer op. Wat doe ik verkeerd? Watermerk gegevens zijn gewoon nog bekend. 

outside LRc I have moved entire folder to new hard drive (from C to D),in LRc: with  "update folder location" I managed to get the new place and everything seems to work, however in the "metadata" and "absolute file path" I see the old path!!but when I click on it; it points to the correct folder  😉

Sync is not showing exported image in folder on external ssd.  Exporting to desktop the image appears.  Program says image in in folder on external ssd, but it hangs and never shows up.  a few updates ago I was just syncing the folder and the files were showing up without the import screen, now the import screen showing up has added another step. 

I updated Lightroom from 14.1.1 to 15.0 and AI Denoise has completely stopped working.   I have previously had Denoise failures with all other Lightroom versions higher than 14.1.1 that I have tried, which is why I've been using that version. Reverting to 14.1.1 always restores normal AI Denoise operation. I suspect there was a change to the Denoise implementation in 14.2 that causes it to consistently fail on my machine.   The exact problem as I'm experiencing it with 15.0 is as follows:   Clicking on "Denoise" for the first time for a raw file causes the "Applying Denoise" progress popup to appear, but it disappears when progress is only about half-way through, and afterwards Denoise remains disabled (as does Raw Details). This repeats if I then click on "Denoise" again, but with the popup being visible for just a fraction of a second, if at all, and Denoise continues to be disabled afterwards. If I then click on "Raw Details", Raw Details are immediately applied with

Bonjour. la derniere mise a jour de lightroom classic 14.5.1 ne m'est pas proposée, et j'ai beau faire, je ne trouve pas la solution. Autre probleme, ma sauvegarde de catalogue m'est depuis peu systematiquement refusé. merci pour votre aide

My catalog just updated and had lost files so I found them  but in douing so some how I ended up with a new 2023 folder and it has a subfolder I cannot delete.     

ayuda mi app de lightroom classic no abre, no se si es problema de creative cloud, cuando le doy en abrir me sale el icono de cargando en el puntero del mouse y no abre, intente abrir el lightroom normal y no abre tampoco ayuda de verdad mi trabajo depende de lightroom 

Bonjour,Depuis quelques temps, je remarque que LrC détecte bien les visages mais ne reconnait plus les visages déjà nommés plusieurs fois.une idée ?merci 

Hi GuysSince updating to LRC 15.0.1 if I attempt to crop an image having set the crop lines, when I click on the crop icon to carry out the edit, the crop lines disappear without performing the crop as if I had cancelled the edit. Settings are the same as I've used for the last 5 years:Aspect, CustomUnlockedConstrain to imageImages are usually Canon CR2 but I have also tried converting to .dng without any improvement. Any guesses where I'm going wrong please.Paul

Hello LrC Team, if you copy all settings (with KI NR) from a cropped photo & paste it to another photo will give some "nice" ghost effects. It will paste the content from the KI-noice reduction into the pasted photo. Hope you´ll fix it in the next version. 🙂 Many thanks René  

I'm seeing lots of discussions about transferring to Macs but haven't found much on Windows.  What's the best way to transfer everything from my old Windows system to my new Windows computer? Thanks all.  

Lightroom Classic will not open after the October 2025 update. I updated  my laptop and it worked fine. However, on my tower system with a very large date base of pictures it won't open. I click on the LrC icon, I can see it launches in the Task Manger but it just goes to EOJ without any error or any message of any kind. I"m up to date on my WIndows 11 system, and I updated the graphics drivers. If I try the many suggestions on the internet like holding different keys down and lanching Lightroom I don't get the response they say I should get on the internet. My catalog and backups are on a dedicated hard file on the main system while my photos are on a 10tb external drive. 

Hi everyone, I'm at my wit's end with a Lightroom Classic issue (latest v15.0) and I've run out of ideas. The Core Problem (The Anomaly): My Library Module is incredibly slow. When I cycle through photos (in Grid or "Fit" Loupe view), the entire LrC interface hard freezes for $2-3$ seconds on every single image. During this freeze, I cannot click anything—the UI is completely unresponsive. The weirdest part: my Develop Module is much faster. I can cycle through the same photos in Develop (using Smart Previews) with almost no lag. This is the complete opposite of how LrC is supposed to perform. "The Freeze" Details (What happens in those 2-3 seconds): When monitoring Task Manager during the Library freeze: HDD/SSD: 0% active time (no obvious disk access). GPU: 0-1% usage (not processing). CPU: A small spike (around 10-15%), which on a 3900X (24-thread) suggests a single-core bottleneck or hang. My System (It's not a slow PC): CPU: A

I copied my huge 132gb folder from my computer to my hard drive to free space....its still on my computer, but it has lost all of my edits on my photos I was working on...like the masks just have an exclamation point saying redo.  I sick!!!  please can anyone tell how I can make this  program find the edits that are obviously in there. I'm literaly lost!

Lightroom Classice 15.01. Denoise runs when selected for an individual image or when synchronising a batch BUT the iamges are not displayed as the denoised versions in Develop or in Library view. No matter what I try it seems that Denoise just does not work anymore. I have tried auto synch whic runs throughy all the images (yawn) and then fails to actually denoise them. Also on closoing LR down the program fails to make a bnack up of the catalogue depsite it being directed to exactly the same folder it has always used. I have reset preferences and that has not worked. Any help would be apprecaited because as it stands, this is pretty unusable...

Hi,I need help. Just upgraded to LIGHTROOM CLASSIC 15.0.1 and initally when openning had no photos. Then went to File - Open Recent and openned hwhat I thought was the most recent and I have no photos from the last 16 months on there. How can I find the most recent catalog? I'm on Windows