Lightroom ecosystem (Cloud-based)

It's been a while since I realized that I couldn't use the "create edit replay" in my Lightroom Mobile. I have tried looking around in the forum, reinstalling it, deleting cache, and I have sent the Diagnostic Log(?) file to the relevant email address. Is there any solution for this certain bug? I remember that this is a rather rare occurrence since in the past thread it was said that it was really a very uncommon one.

Can i transfer (copy) images imported to LR CC to an external drive

Just installed latest (as of today) verison of Lightroom CC on my Macbook Pro M4. I already have it running fine on my Macbook M1 Pro. Both using Mac OS 15.4 if im editing an image, then hit G to go back to the libary view, i end up with a panel to the right titled Grid view, and tells me edit tool arent avaible. if i hit I i can get the Info panel, and thne pressing G slides it out of the way when going back to Libary. If i then edit an imabge and press G im back to the Grid message panel. On my M1 mac this doesnt happen. I have trashed the prefernces and unintalled and reintalled twice. 

Hello,When I click on "Off" to change the geometry, nothing happens whereas I should see the contextual menu to switch between Auto, Guided, Full etc...

If I purchased the Lightroom Mobile subscription for $4.99 a month, would I also be able to access Lightroom CC on a desktop computer?

Version 9.5.1iPad Pro M1, iPad OS 18/18.1 but also iPhone 12 Pro Max and desktop on Windows 11Thumbnails are not generated in Galery (screenshot attached)I tried reinstall, cache deletion, nothing helped. It's not happening for newly imported photos, only older ones

Estou tentando remover uma pessoa da foto, faço a seleção dela, mas não tirar o dedo da tela, automaticamente é selecionado uma área maior que eu desejo, antes eu utilizei diversas vezes essa função e funcionou normalmente, agora está dando esse erro. Na área vermelha é a que eu selecionei, e a branca é o erro que está acontecendo.

When I try to sync videos from my desktop to the cloud using Lightroom mobile, the application does not allow me to sync the videos. It syncs my photos, just fine, but it shows the videos grayed out, and I can't select them for synchronization. I have converted them from Apple format to MP4 and or MOV. Any help would be greatly appreciated .

In the past, I have been able to connect my Canon R6 and or connect a card reader directly to my phone or iPad Pro and hit the add images Button. It would then access the card or camera and show me all the thumbnails as a preview that I can select to import. For the past month or so all of the images are great out, so I cannot see the preview. I can select them, but I cannot see them.when I connect my device or card reader to my laptop, there is no problem. My workflow includes on the go editing and it's very convenient to be able to do this on my phone and or iPad Pro.       I have since having this issue deleted like remote and reinstalled and I have gotten a new phone which has reinstalled. I also have the codec from normal raw to Craw just to see if there was a difference and there is not.

Bonjour,Serait il possible de corriger dans lightroom le point d'autofocus réalisé lors de création d'une photo au format RAW SVP ?Ce serait magique, mais je pose la question en doutant d'une réponse positive 🙂 

After rotating a photo within the iPhone's lightroom app, the adjust white balance feature does not align itself with the rotation. So one cannot use the eyedropper tool since the colour on the wheel doesn't match the colour in the rotated photo's pixel

Roundtripping to PS with as a smart object does not carry over the RAW development settings done in LR. If I do the same thing in LrC it works as expected. Please see the screencast I recorded:   https://youtu.be/sDTwr69MByE   MacBook Pro M1 Max Sequoia 15.2 Lightroom 8.1

I an getting a folder called "auxiliary" showing up when I export a file(s) to a seperate folder. Nothing appears to be saved to this folder, but it appears the first time I export a file. If I delete the folder it does not reappear if I expoet more files.   Ian Winter    

Product: Adobe Lightroom Version: 8.1 Operating System: MacOS OS Version: Sonoma 14.5   Issue: When exporting a User Preset to the same file name, despite the warning about the file being replaced, the file is not overwritten.    How to replicate: 1. Create a User Preset 2. Adjust White Balance Temperature 3. Right Click and Export Preset with filename Test.xmp 4. Open the Test.xmp exported preset file in a Text editor like TextEdit and Note down the Temperature value. (should be something like: (crs:Temperature="5000") 4. Change the Temperature value in Lightroom 5. Right Click and Update Preset with Current Settings 6. Right Click and Export Preset, select the same location and file from Step 3 7. Click Replace when the warning about overwriting the file shows up. 8. Open the preset file in a Text editor and look at the Temperature value.   What is expected: To see the changed temperature value   What is observed: The same, unchanged temperature value.  

I recently got a new computer. When I try to use lightroom CC, the tone curve is blank. Even if I adjust exposure settings or drag the curve, I can't view the histogram. It's still compltely fine on my old computer. I tried quitting and restarting and nothing has fixed it. Any suggestions?

Hello, I would like to use lightroom to correct the distortion by the ETZ Adapter ring. And when I want to choose the profile manually, the select box only jump to "内置" , and can't change anymore. But I use the lightroom classic, it works well. Is it a bug on lightroom or my wrong operation?       The normal on lightroom classic:     And by the way, is there a way that I can correct at jpeg by using profile manually? There are only few profiles at jpeg profile. However most profile (like sigma 90 dgdn can't be used at jpeg but it can be used at raw)  only can used at raw?  

I'm so devastated.  I finally finished all of my edits from a photoshoot, all 7,613 photos, on my ipad and went to open the desktop version to send them off to Smugmug, just to watch as slowly, thousands of edits were reverted. The amount of time it's going to take for me to go back through each of these photos and undo this bizarre bug is just heartbreaking.    The worst part? This isn't the first time this has happened on this same batch of photos. Something has to be done about this. I made sure my iPad was fully synced before opening the desktop, and it still appears to be a consistent issue.   Everything is much faster to edit from my iPad, as the desktop app takes far too long to load each photo when going one by one. 

Lightroom has been having issues with some, but not all video files, saying it cannot import because I do not have disk space for thousands of petabytes (which isn't even possible). I have had this issue with videos from both my GoPro and Nikon Z30. Lightroom thinks the file size is enormous, but everywhere else the file size is correct.   If I import with Browse and navigate to the camera folder, it does not have any issues, but that's not a good fix for me when I have to hunt through an import of 400 files to uncheck the culprits so I can import the rest normally. 😞   I have no idea why this is happening or how to fix - I am trying to do more video editing, and it'll keep being a pain in the butt if I can't get to the bottom of it. Happy to take any advice.   Thanks, Sarah

I'm running LR 8.1 on a Mac (Sequoia 15.1.1), and there seem to be some really severe bugs. First off, some of the slider controls will suddenly disappear - I can see the number value, but not the slider itself (e.g. Temp under Color, but I can manually enter a new number for the temp, which is very time intensive when I'm trying to hit the sweet spot). In the Info section (metadata), the fields and their titles will initially appear, but if I've entered something, those fields may disappear and I only see the titles (and sometimes I can click on the solid grey area below the titles to make the text appear when highlighted, but not always). Closing and restarting LR seems to help for a bit.   Finally, the memory issue with LR has gotten even worse with this version. I have to close and restart the app a couple of times a day, and *never* leave it open overnight, because otherwise it'll freeze up, with a system message saying that it's using nearly *60GB* of application resources (

I have my OS in English US, all my apps in English US including Adobe Creative Cloud.However when I install Adobe Lightroom out of  Creative Cloud it gets installed in German.WFT? To make thigs worse there seems to be no way to change it to English. How can I get the software to show an English UI?

When I share a photo album in Lightroom iOS with people using the link option it sometimes displays the cover photo in the WhatsApp link and sometimes do not show the cover photo What can I do to rectify this so the link and the cover photo both show on a the WhatsApp message. Refer screenshots. Album underlying settings are exactly the same 

LR is giving me an error message when trying to use generative remove tool."We've encountered an issue and can't complete your request at this time. Please try again later."I've tried freeing up space on harddrive but no help...

  Lightroom Ecosystem - March 2023 update   Welcome! Spring has sprung and so has the March edition of the Lightroom Ecosystem newsletter. This month we are sharing another tip from Rikk Flohr, Customer Advocate for the Photography products at Adobe, about the difference between posting a Discussion or a Bug on the Adobe Community Forum. We also heard some exciting news with the introduction of Adobe Firefly, a new family of creative generative AI models focused on generating images and text effects. Read more in the News and Blog Posts section.   The Adobe Community forum is the place to have discussions about our products or report Bugs. Here’s how it works.   Do I post in Discussions or Bugs? When presented with a New Post screen in the Adobe Community, you are given three options for Conversation Type: Discussion, Bug, and Idea.  The New Post window will default to Discussions if you search in Discussions, likewise for Bugs and Ideas.