Photoshop

@Sameer K, I tested this again just now and noted the steps (Windows 11 Pro; Photoshop 27.8 Release).Launch Photoshop from the Creative Cloud Desktop app.Open TIFF file.Image > Canvas Size. Dialogue opens in Pixels.Change to Inches.Click OK.Close TIFF file.Open JPG file.Image > Canvas Size.Dialogue opens in Pixels.Change to Inches.ADD a width of .25 Inches.Click OK.Canvas is extended correctly, but I want to add more.Image > Canvas Size.Dialogue opens in Pixels.Change to Inches.Click OK.Rinse and repeat ad infinitum!

Ich habe tagelang gesucht und am Ende etwas gefunden, das ich hieraufschreibe, um euch vielleicht viel Zeit, Stress und ärger zu ersparen.  ## 1. Das Symptom Lightroom Classic und Photoshop starten ganz normal, aber die Grafikkartewird nicht genutzt. In den Einstellungen (Bearbeiten → Voreinstellungen → Camera Raw → Leistung) steht, dass keine GPU verfügbar ist.Entrauschen dauert länger als es sollte, die KI-Funktionen sind lahm. Dabei ist der Rechner völlig in Ordnung: Spiele laufen flüssig, der Browsernutzt die Grafikkarte, alles andere funktioniert. Nur Adobe nicht. Bei mir: Notebook mit NVIDIA RTX 4070 und Intel-Grafik, Windows 11, 16GB Ram. Also kein High-End Gerät aber mehr als fähig für die Grafikbeschleunigung... ## 2. Alle Standardempfehlungen — ohne jede Wirkung Ich habe wirklich alles durchprobiert, was man dazu im Netz findet: - GPU-Einstellungen in Camera Raw zurückgesetzt- Den GPU-Ordner von Camera Raw gelöscht (mehrfach)- Voreinstellungen von Lightroom und Photoshop zurü

I just updated my Photoshop this morning to version 27.9.0 and now, no matter what file format or options I use to export an image, the export appears washed out or sun-bleached.On a Reddit, I found the solution (posted 11 hours ago, very much in the same timeframe as I began experiencing it), which is to go into Preferences, under Performance, and uncheck Use Graphics Processor:https://www.reddit.com/r/photoshop/comments/1vak5kj/photoshop_update_and_now_my_images_look_washed/This should definitely be fixed. Thanks so much.

VERSION: 27.5.0: While creating in Photoshop, if I hit CTRL + Z, it then reverts my artboard to a random save point. When I hit CTRL + Z + SHIFT, it as no effect. Essentially I can’t undo anything without starting over to a random point of my design.

Qualcuno ha la libreria it_IT per photoshop cc 2018 che renderebbe i menù in italiano…?

The new version of Photoshop V22.1.0 promises support for HEIC files but I still can't open the Canon HIF files produced by the R5 and R6. I believe these are HEIC format but they won't open even after installing Windows 10 HEIC and HEVC extensions or renaming the file to .HEIC. Only the Canon DPP app opens them at present. There was also a Canon firmware update that promised improved compatability but this makes no difference. Is it a Canon or Adobe problem?

Issue summary: After creating a CMYK color swatch, restarting Photoshop will change the color elements.Product and version: Photoshop 27.9.1  It does not occur before 27.8.Operating system: I checked it on macOS 15.7.8.Steps to reproduce: Create a CMYK color swatch. Example: C0 M0 Y0 K100Restart the appExpected result: The color swatch as created is retained.Actual result: It has changed to a color value that has been converted from CMYK to RGB to CMYK.

I’m getting incorrect transparency showing in documents in the latest version of Photoshop. I’ve had to roll back to 2025 for documents to work correctly.In the below image you’ll be able to see a faint outline of the underlying transparency/alphas that are in my photoshop document.As you can see, I’ve got a solid colour fill at the top of the stack with another black & white image placed above it. I’ll be using the B&W image for making perfect alpha selections.The solid should give me a fully-solid background, yet transparency is still visible. This can lead to incorrect masking if I’m using the RGB channels for selections.This has been happening since Adobe messed around with the new alpha selection for EXR layers/files that are brought in.Please get this fixed asap, we shouldn’t have to roll back to previous versions for stuff like this.Photoshop 29.9.1 / Windows 11.  

J'ai decouvert un bug avec les objets dynamiques vectoriels, des éléments disparaissent où sont déplacés après modifications/enregistrement dans illustrator puis mise à jour dans photoshop.Photoshop v 27.10Illustrator v 30.8.1

I have several M1 Macs—from Mac mini to iMac—and they all have the same issue. Whenever I open Photoshop, Illustrator, or InDesign, even if I don’t do anything, WindowServer will jump to around 80–90% GPU usage. Once I start working with files, even just opening a single image, the whole system becomes choppy and starts dropping frames, with GPU usage almost maxed out.But : if I switch the app to full-screen with menu bar mode (press F), the window shadows disappear, GPU usage drops back to normal, and everything runs smoothly—even with large files open. This makes it pretty clear the issue is related to how window shadows are being handled in macOS 26 and how it interacts with Adobe apps.It’s been months since Adobe 26 came out, and I’ve been waiting for updates to fix this, but even the latest versions still haven’t solved it. At this point, I’m wondering if it’s even fixable.M1 Macs are not that old—most Mac minis and iMacs from around 2021–2022 are still M1, so they’re definitely n

Since the 27.10.0 update (installed around 27 August 2026) Generative Remove has been unusable on normal camera files. ENVIRONMENTPhotoshop 2026, version 27.10.0 ReleasemacOS, MacBook Pro 16 inchPaid individual subscriptionStandard generative features listed as unlimited, 1980 of 2250 premium credits remaining STEPS TO REPRODUCE1. Open a 6884 x 4302 px PSB (a cropped 30 MP full frame camera file), ProPhoto RGB, 16 bit, multiple layers with smart filters.2. Select the Remove tool. Generative AI on, Sample all layers on, Create new layer on.3. Paint over a small object and press Enter. RESULTThe Removing area progress bar appears and stalls at roughly ten percent. After about a minute the dialog disappears, the mask is discarded, and no Remove tool edits layer is created. Nothing in the document changes. Sometimes the message Please check your internet connection and try again is shown. Often there is no message at all, so there is no way to tell a failure from a slow success. EXPECTEDTh

Hi everyone, I would like to report this explicitly as a bug report, and I kindly ask that it not be converted into a question. The behavior is reproducible in my setup and, from my point of view, affects WinTab support in Photoshop 27.6. After updating to Photoshop 27.6, WinTab still no longer works reliably. I need WinTab because pen input is much smoother and more precise with it, especially when working with sliders, numeric input fields, and Photoshop UI controls in general. Reproducible behavior With WinTab enabled, Photoshop 27.6 freezes as soon as I move the brush size slider. Important detail:The freeze happens even when I move the slider with the mouse, not with the Wacom pen.To me, this strongly suggests that this is not simply a Wacom pen issue, but a problem in Photoshop’s WinTab handling itself. Test results in Photoshop 27.6 WinTab enabledopened a new test document selected the Brush tool moved the brush size slider using only the mouse Photoshop freezes immediately afte

Hi everyone. The new “Light” adjustment layer added in version 27.10.0 causes extreme lag when I work on that layer (using Dodge & Burn, for example)—once I hide that layer, everything runs smoothly again (Mac Studio M1 MAX, 64GB, OS 26.6.2, German). THX for feedback …

Hello,I have encountered what appears to be a GPU-related rendering bug when converting RGB images to CMYK in Photoshop.SystemPhotoshop 27.8 macOS Tahoe 26.5.2 Mac Studio M2 Ultra Apple Silicon GPUProblemWhenever GPU acceleration is enabled, converting an RGB image to CMYK produces severe black rendering artifacts across the image. The artifacts appear immediately after the color conversion and make the document unusable.The issue occurs with multiple images and is fully reproducible on my system.Steps to ReproduceOpen an RGB image. Make sure Use Graphics Processor is enabled under Preferences > Performance. Convert the document to CMYK (either Image > Mode > CMYK Color or Edit > Convert to Profile). Large black artifacts appear throughout the image.Expected ResultThe RGB image should convert normally to CMYK without any visual corruption.Actual ResultThe converted image contains large black rendering artifacts that were not present in the original RGB document.WorkaroundDi

Sorry to bring this up again, previous thread is locked. The bug that has run throughout all of version v26 of photoshop is still here on my machine on v27. After opening a couple of raw files the 'Could not open 'file name' because of a program error' dialog is displayed until Photoshop is shut down. PS can be used okay without opening raw files, but it's fairly critical to my workflow so I'm still stuck on v25.9.   Has anyone actually found a fix for this other than building a new computer! I've tried uninstalling and cleaning all PS software and raw, uninstalling and reinstalling graphics card and drivers (radeon 6650xt on both adrenalin and pro drivers) win 10, i9700k 32gb ram. Thanks in advance!

I have a series of panels docked to the right side of my screen.  Since updating to the latest version of PS these won’t stay the way I set them to work. Each time I open Photoshop, the top three panel groups (Navigator, Color and Adjustments panels) are fully expanded height-wise, while the Layers panel is collapsed at the very bottom of the screen.Before I can work, I have to double click the Layers tab to expand it, then resize the other panels to how I want them. It’s a rather annoying inconvenience. I do have my workspace Locked (Window>Workspace>Lock Workspace).I’ve attached pix showing how they look when PS opens, and how I set them to work.Running Photoshop V 23.3.1, Windows 11 Pro build version 10.0.26200.PC - Core i7-10700k, 16gb ram, 8gb GeForce RTX3070  

Over the past two days, I have encountered an issue where the Gemini-powered AI Assistance features are not functioning when working with 4K resolution files in Photoshop (v27.10.0). While GPT-based models appear to be working correctly, the Gemini models are failing. Additionally, the Reflection removal tool in both Photoshop and Camera Raw within Lightroom Classic is also completely non-functional.I have already attempted to resolve this by signing out and back into my Adobe account and restarting my computer, but the issue persists. Could you please investigate this? 

Mein Workflow ist, dass ich grundlegende Änderungen in Lightroom vornehme und die Datei dann als Smart Objekt in Photoshop öffne (Bearbeiten in → Photoshop als Smart Objekt öffnen ...).Entferne ich in Lightroom nun Spiegelungen über Entfernen → Spiegelungen, lässt sich die Datei nicht mehr als Smart Objekt in Photoshop öffnen. Es erscheint keine Fehlermeldung.Versionen:Lightroom Classic-Version: 15.5.1 [ 202608131348-cab7eed5 ]Adobe Photoshop Version: 27.10.0 20260824.r.26 9d9635d  arm64 (final, Release)

The bug is a seemingly random and intermittent brush lag on a Mac M4. It persists after all troubleshooting procedures (versions 27.9.1 and 27.10)Product: Adobe PhotoshopVersions tested: 27.10 (current),  27.9.1 — identical issue on both, 26.0 and BetaSystem: Apple Silicon M4, macOS (latest version), 24 GB unified memorySince: The issue first appeared roughly on the latest versionRandom slowdowns occur while drawing or erasing brush strokes in Photoshop. The stuttering happens unpredictably, with no discernible pattern, and delays and groups every action made during the freeze at the end of it. Tool changes and windows also freeze. The document involved is not large and the issue is reproducible.Causes ruled out through diagnosis:The issue persists in all of the following configurations, which eliminates each of these as a cause: •⁠  ⁠Rollback to version 27.9.1 (identical lag) •⁠  ⁠Full reinstall of the latest version with preference deletion •⁠  ⁠New standard macOS user account (ident

Bonjour,Quand j'utilise l'Outil Correcteur Localisé en cliquant avec ma souris sur une zone de la photo à l’écran, une multitude de lignes partent dans tous les sens. Donc cet outil ne fonctionne plus depuis plusieurs jours. Est-ce un bug ?

Any time I attempt to edit a photo with any tool, the screen display has multiple title bars or will cause the screen to go completely black. 

I have been with Photoshop since version 1 1990. I have to say this the WORST version that ever was released. Stop sending you IT to [cursing removed] we are getting [cursing removed]  as product.   Every time saving in EPS and trying to reopen the same file we get this message “This document contains Adobe Photoshop data which appears to be damaged.  Continue and ignore the Photoshop data?”  It doesn’t happen with any other file format saved.

System: Photoshop 2026 on MacBook Pro M5 ProSteps to reproduceCreate a Timeline Frame Animation. Create three layers: Layer A, Layer B, and Layer C. Set up the frames as follows: Frame 1: Layer A visible only Frame 2: Layer B visible only Frame 3: Layer C visible only Select Frame 2 and duplicate the visible Layer B.Expected behaviorIn Photoshop 2023, 2024, and earlier versions, the duplicated Layer B is visible only on Frame 2, because that is the frame on which the source layer was visible.Actual behavior in Photoshop 2026The duplicated layer becomes visible on Frame 1 as well as Frame 2.The same problem occurs when pasting content with Cmd+V while working on Frame 2: the newly pasted layer also appears on Frame 1.This significantly disrupts frame-by-frame animation workflows because every duplicated or pasted layer then has to be manually removed from Frame 1.Possible cause: “Propagate Frame 1”This appears to be related to Propagate Frame 1.Disabling “Propagate Frame 1” does not

Issue summary: Since Photoshop 2025 (exact version unknown, but after 25.12.4) direction-based brush strokes, when set in the brush settings (Shape Dynamics - Angle Jitter - Direction), are not working properly. The very first 'pixel' of nearly every stroke is angled about 90 degrees perpendicular, before correcting itself immediately as the stroke continues. This breaks a previously working workflow. The problem is only mitigated by using external stabilisation (I’m using Lazy Nezumi Pro with light smoothing), which suggests the issue is related to how initial pen input samples are handled at stroke start. I also ideally need to have 1% smoothing enabled in Photoshop, or the bug can lightly reoccur occasionally. Using older Photoshop versions avoids the issue, but this is not a viable long-term solution due to other compatibility and stability concerns. I have used these brushes for years with no issues until recently.Product and version: 25.12.4. (laptop) the bug does not occur in th

I am experiencing a reproducible issue with Generative Upscale in Photoshop 27.10 on macOS.When I use Generative Upscale > Firefly Upscaler, the resulting document is created, but the image is completely black.Steps to reproduceOpen an image in Photoshop. Choose Generative Upscale. Select Firefly Upscaler. Run the upscale. The result opens as a solid black image.Expected resultThe upscaled image should be displayed normally.Actual resultThe resulting image is completely black.Important detailsPartner models such as Topaz work correctly inside Photoshop. Firefly Upscaler works correctly in the Firefly web app. The problem occurs only with Firefly Upscaler inside Photoshop. I tested with sRGB, RGB color, and 8-bit images. I reset the Photoshop preferences completely. I signed out of Creative Cloud and signed back in. None of these steps fixed the problem.The UXP log repeatedly shows errors related to the newly created document:handleNewDocument: activeDocument nullhandleNewDocument: d