Photoshop

CC 2024 Verion 25.12.2Win 10 (updated)AMD Ryzen 7 2700X CPUGigabyte X570 PCIe 4.0 SATA 6GB/s USB 3.1 AMD X570 ATX Motherboard64 gig memory:Corsair Vengeance RGB Pro 32GB (2 x 16GB) 288-Pin DDR4 SDRAM DDR4 3200 (PC4 25600) Corsair LPX 32 GB 3200 MHz C16 DDR4 DramMSI Radeon RX 590 8GB GDRR5 Memory Graphics CardSamsung 970 EVO 500 GB PCIe M.2 2280 SSD2 EACH WD 1TB 7200 rpm Sata 6 gb/s, 64 mb cache Hard Drive.2 each 2TB Western Blue 7200 RPM Hard Drive I have used BrushBox since 2017.  Few if any complaints.  About 2+ years ago I did experience loading issues. Derrick confirmed that other users have also encountered the issue. His explanation.....none.The last version was released I believe in 2023. It has been quite stable.  Until about a week ago.Suddenly it would not load in cc 2024.  I then tried 2023.  BB loaded.Decided to reset Preferences in 2024.  BB loaded.  I then made changes to my preferences, closed 2024 and reloaded.  BB would

Issue: Assigning the new organisation colour options to actions does not display properly in button mode.  Photoshop version: 26 OS: Windows 11 Steps to reproduce: Assign colour fuschia (for example) to an action. Go to button mode. Result: Assigned colours display as either the wrong colour or no colour. 

For the last week or two, I've had problems with "Save as a copy" or "Save as" if I try to save a book cover image as a PDF. It will almost immediately jump to 99% on the save bar at the bottom left, but then gives an error dialog after a minute or so stating "Could not save a copy as “FILENAME” because of a program error." This is a slight improvement over previously (before I updated to the most recent version), where it would simply crash the program. I followed all the steps under "Program error while saving files" on https://helpx.adobe.com/photoshop/kb/program-error-opening-psd.html (except for reverting to a previous version). None of them help. I even recreated from scratch the initial file I was creating when I ran into the problem. It seems to be fairly random whether it has the problem, but once a file has the problem, I can't save it as a PDF no matter what I do. Here's the error output (obtained through the plugin mentioned on the above help page). I've also atta

Good evening, I have a problem with the raw camera filter, it tells me, the raw camera filter could not be completed, because there has been a program error, and I cannot save for the legacy web, please help.

The function to use the chosen brush as an eraser doesn't work in the german Version, even though it is mentioned in the official list of shortcuts.

Quando utilizo algum mockup e finalizo, não consigo exportar em png, faço todos os passos, salvo em meus arquivos mas quando vou ver a imagem está toda preta ou  com grandes pixels verdes, alguém sabe como resolver? 

This happened today- though it kept happening with my other files as well. What kind of issue is this?-Version 25.12-Windows 11-Unknown steps to reproduce problem-Expected result was to draw like normal using a pattern layer atop said drawing layer. This pattern layer is set to soft light. 

Scripts installed in Photoshop 25.12 Presets/Scripts folder are not copied to the new install of Photoshop 26.0.

Hi zusammen,  ich habe folgendes Problem mit meiner Photoshop 2024 25.12.0. Version: Wenn ich ein Fenster geöffnet habe und den Kopierstempel benutzen möchte verschwindet das Fenster um die Werkzeugeinstellungen vorzunehmen hinter dem Bild.Egal ob ich rechte Maustaste benutze oder oben in der Leiste auf die Größenauswahl gehe.Siehe angehängte Screenshots. Habe das Problem erst seit dieser Woche. Vor meinem Urlaub also vor dem 13.09.24 ging das ohne Probleme.iMac 27 Zoll 2017Betriebssystem: Ventura 13.6.9 Kennt das Problem jemand und hat eine Lösung? Das nervt mega und beeinträchtigt den Workflow immens. Lieben Dank schonmal und viele GrüßeCarina

So im having a photoshop problem and I can't find any solution... my keyboard shortcuts stopped working almost entirely. It works on other Adobe apps such as Premiere and SP and Illustrator, but PS remains stubborn to do nothing when I press any regular shortcut. The only thing that I noticed that DOES work is when I press the spacebar to use the Hand Tool. ( for example, B for brush, E for eraser, V for selection tool - all not working. CTRL+ anything doesn't work either). I reset PS settings, reinstalled it twice, changed system language to English - nothing works. If anyone has any ideas for a solution - I'd be delighted to try. Apperently the F keys (F5 - brush settings for example) still work. My mind is blown by the inconsistency with this issue

This is a bug that has existed since macos introduced time machine backups. As a user I think it is about time that this issue is addressed, it has cost me countless hours of work time that I had to use working around this bug that it has become really expensive for me. Step to reproduce: use a mac os system and run time machine. Work on it until disk fills up and do regular time machine backups. When the disk is full, free some disk space, moving finished photoshoots to a NAS is a good way. (Don't use lightroom when doing it, because it *will* eventually have hickups and fail and then a simple task of reliably copying a half copied folder to a new location becomes a pain).Now confirm in finder that you have more than enough disk space available to import a new shoot from a large card. You can also confirm that Lightroom will likely not reflect this and show a lot less space than is available (in my case just now it was 700GB! The exact number lightroom sees unfortunately is

Ich kann leider mit der Neusten Version 25.12 nicht Arbeiten, weil meine Pinsel dann plötzlich sehr stark zeitverzögert abeiten.  Gibt es schon hinweise zu diesem Fehler ?  In der Vorgänger Version habe ich diesen Fehler nicht

Hola, desde que puse un nuevo código para seguir con mi subscripción de photoshop se me ralentiza al punto de no poider trabajar, cualquier acción como juntar capas tarda más de 2 minutos, al cabo de un rato trabajando se va internet en mi ordenador ¿Le ha pasado a alguien más? ¿Habeis encontrado solución? Gracias

Alguém sabe o motivo deste bug?Acontece em tudo que eu faço na tela, exemplo: arrastar objetos usar ferramentas.Como visto na imagem acontece um bug visual

Unfortunately I have to revive this but:https://community.adobe.com/t5/photoshop-ecosystem-bugs/p-completely-broken-hand-tool-ps24-5-hand-tool-sticking-sticky-not-seeing-mouse-up/idc-p/14660275/page/26#M106438@CShubertsince you asked about this as the last post there:We wanted to update this thread that the issue was fixed with the release of 25.6. If you are still having this issue with the most recent Ps version, please start a new thread with your information so the team can investigate further.Unfortunately this bug is still happening to me on every single machine I own (all different PCs; all Windows 10 but each with otherwise different hardware specs - none of these computers have ever had a tabloet installed so there are no tablet drivers or tablet hardware associated with this). The issue was never resolved for me in 25.6 as said in that thread, but unfortunately has (and still) persists including in the most recent version. I am now on 25.12 and it is still a problem.I am not

Al momento de usarlo dice "No se ha podido cumplir porque ha habido un error de programa." y sus soluciones es solo ir a un foro de discusión. Ya desinstalé e instalé nuevamente para ver si así funcionaba pero nada.Photoshop Error informationCode: -1Text: porque ha habido un error de programaMessage: No se ha podido cumplir porque ha habido un error de programa.Stack:Adobe Photoshop 25.12.0 20240903.r.806 055f5e9 - x860 address: 00007FF6CFF1DC82 base: 00007FF6CC880000 module name: 'Photoshop.exe' symbol info: 'curl_formget:-1 in n.a.'1 address: 00007FF6CFECCDCD base: 00007FF6CC880000 module name: 'Photoshop.exe' symbol info: 'curl_formget:-1 in n.a.'2 address: 00007FF6CD0E3611 base: 00007FF6CC880000 module name: 'Photoshop.exe' symbol info: '??0?$singleton@V?$extended_type_info_typeid@VModeler@dbrush_0011011100@@@serialization@boost@@@serialization@boost@@IEAA@XZ:-1 in n.a.'3 address: 00007FF6CD0E162C base: 00007FF6CC880000 module name: 'Photoshop.exe' symbol info: '??0?$singleton@V?$e

Hi We are having a problem with Generator in Photoshop 2022. Photoshop 2021 works fine. Does anyone have this problem or a fix?   With Photoshop version 23.3.0  File Menu/Generate/Image Assets works normally on files on my local Mac Drive, but when running it on a file located on our company server no image assets are created. Note that it does create the designated subfolders, but they are empty. With Photoshop 22.5.7 generator works fine on the same file, on the same server. It generates subfolders and files. I am not accessing the file via VPN. I am in office. I have uninstalled the newer 2022 version and reinstalled it with no change in behaviour. All the setting seem identical in both versions. The generate jsx files in both Photoshop folders are identical. macOS Catalina 1-.15.7  iMac (Retinal 5K, 27 inch, 2020)   Thanks in advance, Ron Troyer  

So the thing is, every time when I try to open more than exactly 2 smart objects, my Photoshop crashes and I have to open up Task Manager and Kill Photoshop to get it back to work. This is getting irritating since I need to work on multiple files at once. I don't know if this is due to my system specs or else.It used to work just fine. But recently I am facing this.

The problems I’ve posted here since upgrading from Catalina and PS 22.5 to Ventura and PS 24.x included wonky Photoshop Manages Colors Print windows operation and info. Plus, when I hit ‘Print’ Photoshop sent data to the printer but simply spit out blank paper. After thoroughly uninstalling the Epson driver and PS and manually deleting the remaining folders and files and reinstalling the printer driver and PS 24.x over and again, still no luck. I got the same bad behavior.  Turns out the problem was the Canson paper’s custom .icc that I created and had been happily using in Catalina with PS 22.5. It not only doesn’t work in the upgraded OS and PS versions, it also causes the above-stated tear-ones-hair-out problems. What’s truly maddening: I could select that .icc profile in the Printer Profile window—it wasn’t greyed out and there was no other indication it was causing problems. And, though I’ve researched reasons for these kinds of problems, I haven’t read anything about th

(BR)Fiz atualização do Photoshop para versão 25.12 e minha ação programada para Navegação em guias usando a Roda de polegar  parou de funcionar, apenas nessa ação, as outras ações recomendadas pelo próprio programa estão funcionando normalmente, apenas essa ação que parou de funcionar, então diz o downgrade para versão do Photoshop 25.11 e voltou a funcionar normalmente, pelo visto o problema está na versão mais atual do Photoshop 25.12. Gostaria que esse bug fosse corrigido para poder usar a versão mais recente do photoshop. (US)I updated Photoshop to version 25.12 and my programmed action for Tab Navigation using the Thumb Wheel stopped working, only in this action, the other actions recommended by the program itself are working normally, only this action that stopped working, so it says downgrade to Photoshop version 25.11 and it started working normally again, apparently the problem is in the most current version of Photoshop 25.12. I would like this bug to be f

I'm trying to develop an Adobe CEP extension for Photoshop 2024 on my mac M3, but can't seem to enable legacy extensions on my settings pannel since it's greyed out:  How can I develop and test extensions on my system?

Bonjour, J'ai un soucis récent : Je n'arrive pas à basculer de lightroom à basculer Photoshop avec mes photos au format CR3. Pour le format JPEG, aucun soucis. Mais lorsque je fais CMD + E pour modifier dans photoshop avec le format CR3, il ne se passe rien.  Pouvez vous m'aider ?

Once again I upgraded to Mac OS 13x from OS 10.15x on a 2020 Intel iMac that’s still running PS 22.5 hoping to avoid problems I previously encountered.  No luck—this time due to new problems printing to the Epson SC-P800 I’ve deleted all P800 in System Settings, /Library/Printers…, /Library/Preferences/Adobe PS (1999 the 2021) Settings folders.Additionally, I reset Printers in System Settings, downloaded the appropriate print driver from Epson’s site, and rebooted the iMac, the Epson, and PS…numerous times. The problems: 1) In the Print Settings window to open Printer Manages Color (in Color Handling) I need to hold the space bar while choosing Print, or it won’t open. 2) Even then, the generic window for Printer Manages Colors comes up, not the PS Manages Color. 3) When I hit Print the P800 print window opens, sends data to the printer but then spits out blank paper.  Any help would be much appreciated.

I am trying to make a text follow a curved path that I draw with the Curvature Pen tool, but when I try to move the text through the curve it starts to disappear in the path in some parts and finally I can't fit it in the center part so to say. In the picture below I wrote "THIS IS MY TEXT" as example, and when I tried to move the text through the line, the word TEXT was gone. 

Hello, I have recently encountered an unusual issue with the Frame Tool in Photoshop. I’m working with a file that contains multiple groups and layers. At the top level, within a group I named "Intro Slide", I have three groups/folders : "2 Speakers," "3 Speakers," and "4 Speakers," each containing several layers. Within these layers are objects created using the Frame Tool. The problem occurs when I try to insert a new layer containing an image near where these Frame Tool objects are placed on the canvas. Upon committing to the transform, the image automatically embeds itself into the top layer containing one of the Frame Tool objects, even though these layers are both locked and hidden from the canvas. This behavior was initially difficult to diagnose because, after committing to the transform, the new layer would disappear. It wasn’t until I made each group and layer visible one at a time that I discovered the image had been embedded into one of the Frame To