Premiere (Beta)

I can't do any motion edits. When I select a clip, the response time is over 30 seconds.

First experienced in Premiere v25.2.0 Build 58, might have been introduced a build or two sooner.Steps to reproduce:- Open any project or production- [Open any project in that production (Note: the projects are not displayed as locked by any user)]- Try changing anything in that projectResult:The project panel has a small lock next to the name in the header, as do all sequences you open within that project. You can't create any new sequences or assets or change anything in existing sequences. Tried across multiple productions and project files on multiple backends (network share and local drive).Everything works fine in release v25.1.0, as did it a day or two ago in v25.2.0 beta when I last tested a previous build.Furthermore:Creating a new (local) project file without any production gives me the following error message about permissions:https://imgur.com/a/dRXI6AAI can then make changes to that test project, but cannot save them, getting the same error message each time.So it seems Pr

The Info.plist that is flattened and embedded inside the PProHeadless executable should have the same exact information as the Premiere Pro app, just so that third-party plugins can correctly identify their "environment". Instead, the flattened Info.plist embedded by the PProHeadless executable contains generic/wrong information. In particular, it has the incorrect bundle identifier, bundle version and signature:     CFBundleExecutable = PProHeadless;    CFBundleGetInfoString = "PProHeadless .., Copyright \U00a9  Adobe. All rights reserved.";    CFBundleIdentifier = "com.apple.product-type.tool";    CFBundleInfoDictionaryVersion = "6.0";    CFBundleName = PProHeadless;    CFBundleShortVersionString = "..";    CFBundleSignature = "????"; The PProHeadless executable appears to be launched to render projects via AME, as a background-only version of Premiere Pro (no UI ever presented). It appears that

Previously (like, a week or two ago), I was able to select all of the captions in my sequence and the Essential Graphics panel would show all of the properties of the captions (that is, font, position, etc.) and I could edit everything at once. Life was good.In a very recent beta version, all the editing functionality disappeared from the Essential Graphics panel (in fact, the Essential Graphics panel was gone and replaced with the Graphics Templates panel), but the Properties panel still worked to do it. This was fine, but an odd change (especially since the Captions and Graphics workspace only included the Graphics Templates panel and not the Properties panel).In the latest beta that I just installed yesterday, I can no longer bulk edit the captions from the Properties panel either - I can get it into a mode where I can bulk change the font, but not the position (by "upgrading" the captions to graphics.So, to put it simply, there is no longer an Essential Graphics panel, the Graphics

I'm trying to edit a MOGRT from MOtion Array. My computer is choking!

Applying the mask to opacity is not visable. If I apply opacity as "free draw bezier" is not visable. If I apply it as a elipse or polygon is OK. What I am supposed to do? I can not finish my current project... Help, please!

Updated to Build 58 today and it's locking me out of any project I open and not allowing me the ability to edit at all

Premiere does not appear to correctly parse linear timewarps from OTIO imports - even it's own exports.  e.g. -1000% is read as -123.45% when imported into premiere, but shown correctly when imported into Resolve. Also +1000% resolves to 909.09%. The speeds are (nearly) correct when the PP .otio export is converted to EDL with otiotool. This was a 23.976 sequence, using offline files, but I think the math is incorrect regardless of frame rate. There are discrepencies with timecode when using offline files too - e.g. sometimes the bin start is different from both the start time when it is loaded in the source monitor and when added to a sequence. Seems that the <TimecodeFormat> isn't correctly set for those masterclips.  https://drive.google.com/file/d/1S7rr-lung217W7483ru7sGMGSZhk6nQY - has project and OTIO and EDL export from PPro. The EDL shows correct speeds and in points. EDL export from PPro  001 OFFLINE1 V C 01:0

V25 0.2 beta (also apparent in previous versions)MacOS https://drive.google.com/file/d/1RlTZldPxuyYExpCMn6OD9e5hq74Gr4i0/view?usp=drivesdkScreenRec of issue. Watch this first will be quicker than trying to understand the following... I have a base multicam, named '1.1 MC' feeding nests that are part of a 2nd multicam ('1.2 MC'). The 2nd multicam is then edited into a sequence. This is all within standalone 'project 1' Project 1 is duplicated to 'Project 2' and amended slightly (3-box landscape nest is swapped for 3-box portrait, plus audio in 2.1 base multicam is slipped back 8 frames.). Multicams renamed in project 2 to '2.1 MC' and '2.2 MC'. Both projects added to a production by dragging from finder and dropping on production window (individually, to avoid 'duplicate projects being created - which is potentially another bug?). Fresh 'project 5' + sequence created in the production, project 1 opened and the project 1 edited sequence edited into the proje

After updating to lates beta build 25.2.0(Build 54), Pr pro UI is nomore selectable for some time even if I zoom in and zoom out from timeline. Already reset the app preference from startup (shift click).SpecI7 10gen processor64 GB RAMRTX 2060OC 

If an Iris transition is present, any visual effect plugins applied to the outgoing or incoming clips are fed incorrect frames in the portion of the clip that overlaps the transition. The problem seems limited to the Iris transitions.  Steps to reproduce:- Make sure a recent version of our software is installed: https://fxfactory.com/download/- Once FxFactory has been installed, launch our app and download the trial version of FxFactory Pro.- Launch Premiere Pro- Create a new project- Import one clip and create a new sequence from that clip.- Cut the clip in two, creating a seamless insertion point for a transition.- Apply the FxFactory Pro Color Correction > Levels plugin to the second half of the clip. Adjust some of the parameters to make the effect obvious. - Scrub the playhead over both halves of the clip. Aside from the output of the second half being color corrected by the Levels plugin, the correct video frames are rendered.- Add an Iris Round transition

I have been trying for 3 hours to render and export a half hour video which i do every single week without issue. I have done every single troubleshooting suggestion google can find and nothing has resolved the issue. This work is due for a client to be published and syndicated by morning and I cannot afford to lose this client because your software is buggy. I always have issues with exporting and rendering, it always takes forever, sometimes hours to render and export the hour long shows I work on. Then I have to wait for the uploads and the processing of the host sites, it is hours and hours of my week sitting around babysitting a progress line to make sure it doesn't kick me an error message and stop and make me start all over again. I have tried copying my project to a new project, I have tried opening my project in the standard premiere pro 2025, I have tried exporting to media encoder but it keeps saying it is not installed when i fact it is installed. I try to confirm my downlo

al momento de estar trabajando en algun proyecto de premier pro se congela la pantalla y congela solo algunas acciones solo al momento de dar guardar con ctrl+ s vuelve a su estado normal.

Hi, This error is driving me insane. PPro Beta crashes or gets extremely laggy when I work with simple files in Source Panel/Monitor. Only solution is a PPro restart. Some video files with 48kHz 4 channel audio or just a small simple preview stock audio at 44.1kHz opened in Source Panel gives the Event Panel work to do: "Audio and video clock out-of-sync at" ... "Adobe Player". Does the "Clock" relate to this? I have only one option here: I have never had any issues like this before using this hardware and PPro. If I play the same file in a sequence and Program Panel it does not create the same problem. Only in Source panel?! I've tried the following:set all audio devices to match 48 kHz : No differenceChanged audio driver setting (external audio - Audient ID14) default from 48kHz - 24 bit to 16 bit  : No differencetried changing device class to MME > ASIO > MME : Made audio work better, but video froze - changed back to MME.change lat

If you don’t mind I just want to ask a solution. I’m facing small issue in premier pro beta. When I use effect control in scale and rotation , whatever I used , the timeline is lagging for a moment . Can you share with me some advice for this issue ? I attached a file below for symbol.Thanks 🙏 

I have some 59.94fps files with attached proxies. I transcoded the full res files to 29.97fps, at normal speed, therefore, skipping every 2nd frame.After replacing the full res 59.94fps files with the full res 29.97fps files, the proxies now plays at 29.97fps, but half the speed, as if it is interpreted to 29.97fps instead of skipping frames.

Hi there,The short of it is that the 'Create Clip Marker...' feature within Scene Edit Detection isn't working, at least not for me.  It creates the cut points no problem, but not the markers.  I dragged the clip to the New Item icon so the sequence settings match the clip.  Just running Scene Edit Detection normally didn't work.  I tried removing the audio and running it again... that didn't work.  I also tried to nest the video and run it and that didn't work.  Lastly, I tried it on the clip within the nest itself and that didn't work.  Not sure what else to do...Premiere Pro 24.5.0 BETA2017 iMac Pro2.5 GHz 14-Core Intel Xeon WRadeon Pro Vega 64 16 GB64 GB 2666 MHz DDR4Ventura 13.6.3

Hi, Every time I cut footage, the timeline freezes for about 5 to 7 seconds before unfreezing. This issue wasn't present in the previous update. Do you have any suggestions on how to fix this issue? I'm working in 4k with proxy.System info:x64-based PCTUF gaming x570-plus64GBNvidia GeForce RTX 306012GB for PremiereAMD Ryzen 9 5900X 10-CoreThank youJorge

Version of the App:Premiere Pro Beta, Version 25.2.0 BETA (Build 55)Platform and OS Version:Windows 11, Version 23H2When opening the project window in any project, the program crashes immediately, making it impossible to access the window. Also, the project window doesn't open automatically when first loading a project. To reproduce the bug, launch Premiere Pro Beta, load any project or create a new one, and observe that the project window does not appear. Any attempt to manually open the window causes the application to crash. The expected result is for the project window to open automatically when a project is loaded and to be manually accessible without issue. Please investigate and address this issue as soon as possible.

Hi This is happening on both PP 24 and 25, on a MBP 2023, 36 GB memory, Apple M3 Pro Chip, running Sonoma 14.5Crashes started when tempting to export, still running 2024. I updated my software which landed me in 2025 and it still crashes on export. I have done the following, and nothing has changed the crashes when I attempt to export:-trashed preferences and media cache-changed export settings, also just video or just audio-used encoder -copied the sequence to a new project-tried exporting other projects, stored both on my hard drive and on the external drive where the original crashing project has media stored-run Adobe Creative Cloud diagnostics beta version - which after the first run suggested I crash preference, and running again after that said no compatibility issues or any other issues have been foundThoughts on what else I can try? Yesterday I sent a screen recording to my client to begin reviewing a rough cut. I don't know what else to try! Thanks

É Algo reecorente e muito frustrante, nunca consigo imnportar arquivos sem ter problemas, ou não aceitam audio ou aceita o audio mas não imperta o video. as vezes importa no inicio mas depois não funciona mais. se eu excluir o mesmo arquivo e tentar colocar novamente não vai. arrumem isso por favo, está impossibilitando o uso.

25.2.53 W11/24H2

Es constante, es como si se desconectara la interacción del programa, solo luego después de guardar me permite mover, pero a los segundos igual.

Show Favorite font and Linked styles where are those stored? Every time I trash prefs I lose these settings. @AnnikaKoenig 

Every time there is an update, I lose the Preview Area and thumbnails in list view in the Project Panel. This has been going on for quite some time now. 25.2.53 W11/24H2   It used to be just the thumbnails, but now that the Preview Area is default off it does it with the Preview as well.