Premiere Elements

I am unable to import some new clips. Nothing has recently changed to my knowledge. I have attached the properties of one clip. The camera was set to MP4 2160-25.00p/HEVC LongGOP 72M. I have tried different project settings in PE but they all give the error  "This type of file is not supported, or the required codec is not installed."The file plays OK on an i7 PC although the CPU is running at 100% whereas 4K files normally run at around 40%. May be a red herring.Just to confuse the issue further, if I run the clips through Handbrake, with no change of format, PE then accepts them BUT the new filesize has dropped from the original 118Mb to 20Mb. Not sure what Handbrake has done to it as the framesize is the same but the bitrate has also dropped from 69423kbps to 12309 kbps.Possibly 2 separate issues but could be related. I'm struggling with this one.

Let me mention that up until now I had been using Widows Movie Maker and that software had a feature that automatically adjusted the display time of each slide so a slideshow would begin and end with the chosen music track. It was done with a simple click of a button. Unfortunately I upgraded to a new computer and the program I used does not come iwth Windows 10 (&^#*$#). So I have purchased premiere elements thinking there would be a similar option in the program. I have 50 slides that display for 3 minutes (in total) and a song I want to sync that is only 2:30 minutes. I would hope there is a simple command to adjust the display time of each slide to an amount so that they song and the slide show are the same length. Can someone help me here? I have seen a lot of discussions and videos on syncing time between songs and video but not with a slideshow.  Please don't tell me I have to go in and adjust the display time of every one of my slides manually. Thanks for any help!

Bonjour, Je dispose de Premier Elements 2021, malheureusement je me sen sde plus en plus limité dans les choix de titres, de transitions vidéos et d'animations notamment.  Je suis tombé sur ce type de Pack : CINEPUNCH(voici une bonne vidéo montrant les possibilités du pack les deux premières minutes : https://www.youtube.com/watch?v=5Duk7_53Feo&ab_channel=TUTOPREMIERE )Malheursuement ceci semble réservé qu'à Premiere Pro et After Effect.  Ma question est la suivante: Savez-vous si il existe de Pack/Extension de transitions, titre ou effets pour Premiere Elements 2021 ? Merci pour votre aide

Hello!This might seem a silly question.I have been transferring some holiday videos from VHS to my pc.I use a USB 2.0 device and Honestech VHS to DVD software.Some videos come out the full screen and some letterbox, even though I have created the video in PRE9 with the same settings. Any ideas why this is happening, please?Cheers

New to video, but long time user of photoshop. In photoshop, you open an existing PSD file (PSD1) make any change you want and save as a new PSD file (PSD2). These two files (1 and 2) are totally diferent projects. You open 1 and you see 1, open 2 and you see 2. I thought Premiere Elements works the same way, but at least for me it doesn't. I open an existing project (PE1, make changes to it, and save as a new project (PE2. In a diferent folder name, just to be sure. I can export the new project (MP4) and it looks correct. After I close the program and open the new project (PE2) in Premiere Elements, however, I don't see the new project but the original one (PE1), even though the name of the project is PE2. I must be missing something, otherwise what would be the purpose of "Save as"? Thanks for your help. 🙂

I'd like to be able to export in 9x16, portrait, format.  Application is using a smart phone video taken in portrait with a green screen background, using FX on the background, and then exporting while maintaining the same format. Edit/Project Settings/General has a selection for Frame Size horizonal and vertical.  Mine are not grayed out, but I can't change them.  (Is it because of the note next to the OK button that says "Mercury Playback Engine Software Only"?  I've been posting in another thread about my video card, it's way too lame for video editing work, have ordered a new card, it's on its way) I've also tried Export/Custom/Advanced Settings, changing the width and height in Video/Basic Video Settings.  This exports to portrait format like I want, but shrinks original video down.  See pix of original, unedited smart phone video and pix of export output preview. How do I correct all this?

I'm new to Premiere Elements, though not to video editing in general. Is there a way to get rid of that blue-green ribbon that you sometimes get on old VHS tapes? (I've imported something using a VHS to PC converter, through PE.)And also, to fix the bad tracking that may not be fixable by the adjustment on my VHS recorder?If there are any posts/articles/instructions somewhere, I'd appreciate a link. I'm coming up blank, but it may just be that I don't know what terminology to use to find it.Thanks! 

I am currently using the Trial edition of Premiere Elements 2021 on a Dell G3 laptop with 16 GB RAM, SSD drive, Windows 10, etc.  The program generally runs quickly, but I am seeing a sync issue with some recordings from our online church service.Several MP4 files play well inside and outside Elements, but a couple are out of sync between audio and video by quite a bit.  Strangely, those same 2-3 minute clips play fine in Windows Media Player, Power Director 15, or Windows Photos app.Any sugestions?

What is the least expensive video card for an HP Envy 700 series desktop computer that supports GPU acceleration in PE 2021?  I saw the list of compatible cards, but thought some cheapskate like me might have done the research already.

Two issues: 1) I am evaluating Premiere Elements 2021 and just received a new Dell external DW316 DVD burner. When I try to use Elements 2021 Export & Share to burn a video DVD, it says, "No burners detected." 2) I created an ISO image from my own video recordings (no commercial content) and burned it to DVD using WinX DVD Author. When I put the DVD in one Sony DVD player connected to my TV, it says "Playback Prohibited by Area Limitations." I don't see any settings to solve either issue.I am using a new DELL G3 15 3500 laptop with 16 GB memory and a new Dell External DW316 DVD writer.

Hi everyone,I am evaluating the new Premiere Elements 2021 and get impressed by the companion software Elements organizer.The latter is able to produce very beautiful automated slideshow.However, one is expecting that both software are able to cooperate, and hence that, when the EO software has firstly produced  the slideshow, one can then import it to PE2021 to further editing and personalizing it. One thing is for instance to change music and add more tracks and voice comments, onether is to modify the duration of each single image, another again it to trim some videos. All of these are impossible to control from the automated procedure in EO. In the available guides from Adobe, it is referenced that EO slideshow con be then imported in PE, but this is not the case in 2021, when I get an error like "Unable to open the file test.mcmemories" since it is in the wrong format. Even worse is that if I was supposedly satisfied of the slideshow, I cannot use the export to DVD

Attempting to reinstall Photoshop/Premiere Elements 2020.  Photoshop Elements installs without error.  Premiere Elements does not.  Windows 10 ver. 20H2, Nvidia drivers up-to-date.  Install.log attached.How to I manually uninstall Premiere Elements 2020 (as the error message indicates)?

I'm currently using Premiere Elements 12 and until now it has satisfied my requirements. I have been sent an MP4 file and when I open a new project it only plays the music without playing the video.  When I try and play the MP4 file outside of Premiere Elements I received a popup message saying it needs an HEVC (High Efficiency Video Coding) extension.It there a file that can be installed on Premiere Elements 12 which will enable me to work with this MP4, or does this now mean I must upgrade to the latest version of Premiere Elements.This also make me ask a secondard question.           Will the latest version already have this codec in the package? Please forgive my lack of knowledge on this subject. I hope someone can help to steer me in the right direction. Many thanksDave

  This is the last log I get :<14912> <dvacore.StructuredLogging> <4> We have timed out on an async source. This probably shouldn't happen and will result in performance problems, media Can anyone help me with this problem? Thanks

I have Premiere Elements 18 and up until today I have been able to make cuts in the video timeline anywhere I want. Today the timeline marker is jumping from frame to frame instead of letting me cut anywhere. Snaps are off. Why is this happening? I have already spoken with customer support and reset the preferences. That didn't fix the problem.   Moved from Using the Community (which is about the forums) to a better forum... ModTo find a forum for your program please start at https://community.adobe.com/

1. Is it possible to make an Audio volume adjustment for all clips in a track with one tool and or one command?I can only find adjustments for each single clip.2. is there a tool or a plug in that can handle  2 screens more professional in Windows 10?Thank yu for any support

All of a sudden I get an error message (PE11) that an incompatible display driver has been detected ... update your display driver.  Have been unable to do so.  Program is up to date 

I have reviewed the discussions and it appears the answer results are not clear.Will Premiere Elements 11 install and function properly on a Win 10 20H2 build PC?Thank you

I am using PE21 on a new Computer (Win 10, 64Bit). I cannot export my short Video on DVD nor create an ISO file. Altought PE says its finished successfully the folder on my C drive stays empty. I have also disabled the hardware acceleration and changed the main menu in attempts to export an ISO file but neither of those changes have worked. Is there a solution?

Having purchased Premier Elements 2021 with a licence for two computers, how do I install it on the second computer? Will I need the activation code and if so how do I find it again? Thanks

Whenever I click the Play-button on the video paying controls, the timeline freezes. Then, if I try to close without saving th project, Premiere Elements freeze.Does anyone have a solution?I attach screendump with my system data (in danish, but I think that it should be recognizable)I have 243 GB free space in my C drive.I also attach a small video displaying the process triggering the error.RegardsJan Grenov

I have a very good machine IMOi9-9900K32GB DDR4Intel UHD 630 &Nvidia Quadro P4000 with 8GB RAM But as soon as I have upgraded to Premiere Elements 2021, I cannot believe how bad the performacne is.  First of all it do not support Nvidia Quadro P4000 for GPU accelerated tasks. So it is depended on Intel UHD 630. Premiere 2020 performed better without any acceleration.I tried both enabling/disabling these options but no luck -It also seems like the video rendering time has increased a lot. Timeline playback has huge lag. I have added Premiere Elements exe to use Nvidia 3D but no luck. I have another laptop, i7 with 16GB RAM and only Intel Graphics. That machine is really struggling to run Premiere Elements 2021. This is really bad news. When rival applications like Filmora, Power Director are improving performance, this one is stepping backword I assume. Is there any suggestion I can improve this or should I go back to 2020? I am willing to bet

I am running a Dell Latitude E5570 (laptop), with an i7 6600 U processor at 2.60-2.80 GHz, with 8 GB RAM. Graphics are AMD Radeon R7 M360 and Intel HD Graphics 520. The laptop is 4 ½ years old. It runs Windows 10 Pro, version 20H2, 64 bit. The hard drive is a SATA 256 GB with 26 GB free. I do much of my editing on an SDD 2 TB external hard drive.With some new links from Adobe I’m loaded HEVC video extensions. I’m editing drone video from a DJI MA2. I’ve not had too many problems exporting edited 4K video until I shot in slow motion, even in UHD. The video was taken in the late afternoon and was a bit too dark so I used the various tools Premier Elements v 18.0 makes available to lighten it. It came out fine in Elements, but when I try to export it, even at low resolution (SD 720), the picture is all black. I know my system's RAM is low and that its graphics capabilities are not geared for 4K video. But would 16 GB RAM fix this (I can add to RAM), or are the graphics a lost cause (I can

Hello, Is there a compatibility issue with Adobe Premiere Elements 2021 on MAC M1 chips?When I launch the application it crashes directly. Thank you for your help.SyntaxError-C64

Es sind alle Voraussetzungen gegeben und ich habe alle Schritte von Adobe verfolgt. (Ich nutze Windows 10) Dennoch ist es unmöglich HEVC Videos zu importieren. Alle anderen Softwareprodukte z.B. Filmora, Windows Moviemaker, Windows Foto App können HEVC Videos problemlos importieren. Man erhält folgende Fehlermeldung:Ihr System muss für den Import von HEVC- oder HEIF-Medien konfiguriert sein. Klicken Sie auf "Weitere Informationen", um zu erfahren, wie Sie diese Formate für den Import aktivieren. Ich habe die Adobe Software nur aus diesem einen Grund gekauft! Da auf der Webseite explizit steht das es funktioniert:Unterstützt Photoshop Elements 2020 & Premiere Elements 2020 die Formate HEIF und HEVC?Ja. HEIF-Fotodateien und HEVC-Videos lassen sich sowohl unter Windows als auch unter macOS importieren und bearbeiten.