Premiere Elements

When playing back clips in Premier Elements 15, I cannot hear the audio. It worked fine the other day, but just stopped now. Audio speakers work fine with all other programs on the computer, and I can see the audio levels moving on the screen. I'm running Windows 10. Any ideas? 

After the latest Windows 10 update I can only open elements and load clips into the time line. I can't play or edit them. After 30 seconds the program crashes. I have re-installed the program twice and tried the registry trick from the Phothoshop people. It does not work with Premiere. Any ideas? Thanks!

I asked this question, but did NOT get a clear answer.If one has a perfect system, but the monitor is small, ADOBE will not run at all. It will not run at all. I used that as an example.So here is my question.  Adobe has a cutoff frequency at 2.0 GHz.If the CPU is below 2.0 in Frequency, but will turbo boost ABOVE 2.0 will the program run?This is critical.All the other specs are in order, but the base frequency is below 2.0 GHz.  However it will turbo above 2.0.Will Adobe Elements detect the base frequency below 2.0 and refuse to run, or will it go by the turbo boost higher frequency.Again, all other specs are in order.This is not a repeat question. It is an additional question.

So my computer was out of commission for about a year or so. I just got it running again (it was a RAM issue), and picked up an old video editing project that I'd been working on before the issue had cropped up. And now, for some reason, any playback audio in Premiere is just this high-pitched, trilling/chirping sound. The original audio from the clips is missing. (The audio does work fine in the original raw video files) When exporting, the issue persists in the exported file.I'm using Windows 7, and the clips are video game scenes captured with FRAPS and Bandicam in .avi format. I've already updated Premiere. Tried it both with existing clips that were already in the project and with new clips, same thing. I tried normalising the gain, and it just made the noise louder. (Dunno if it's worth noting, but in the clips from Bandicam, the trilling noise isn't as loud as in the clips from FRAPS, but it's still present, and the original audio is still missing)EDIT: For further reference, I'

While exporting my 12 minute video project to my computer, Premiere Elements 15 shuts down and closes about 25% into the exporting. I have updated the registry as others have suggested and that seems to work a little better, but the program still doesn't complete the export. Any suggestions?

I am working on a Dell Inspiron N5010 64 bit Windows 7 Home Premium SP 1 with Intel i5 2.67 processor, 6 GB RAM.Both Adobe Premiere elements 9 and Photoshop Elements 9 are installed and were working (for years) up until recently.  Both suddenly developed a problem with the Organizer.If I double click on the desktop icon to open Premiere, and then click on the Organize button, I see this message:Elements 9 Organizer has stopped working.If I then click on "View problem details" I see this information:Problem Event Name: APPCRASH  Application Name: PhotoshopElementsOrganizer.exe  Application Version: 9.0.3.0  Application Timestamp: 4d90791c  Fault Module Name: mc_demux_mp2_ds.ax  Fault Module Version: 8.5.0.27572  Fault Module Timestamp: 4c6e25d8  Exception Code: c0000005  Exception Offset: 000ef2da  OS Version: 6.1.7601.2.1.0.768.3  Locale ID: 1033  Additional Information 1: 0a9e  Additional Information 2: 0a9e372d3b4ad1913

My problem:If I run a seamlessly-looping video (stock footage) through Premiere Elements 13 (Windows 10), the result pauses briefly at the end. There's something in the way PEL exports the video that creates this problem.Details:Our church projector is 1024x768 (4:3).Using PEL, I'm trying to crop/resize a 1280x720 (16:9) stock video (seamless .mov loop from Worship House Media) to 1024x768.My workflow uses a 4:3 project preset and a custom 4:3 .epr export preset.This example uses the same 4:3 project preset, but exports at 16:9 to simplify debugging. (Standard export preset, not my custom preset)It's just "place media, export video".The source video is 1280x720 (16:9), 29.97 fps, 30s 30ms. It loops seamlessly in Windows Media Player and my target presentation software, Easy Worship.The PEL project preset is "Flip Mino and Ultra 29_97p (not HD)" to edit in 4:3.I drag the video onto the project.I export using Computer > MPEG > HDTV 720p 29.97 High QualityPlaying the exported video

I can not get adobe organizer or premiere elements 2018 to create either a slideshow or instant movie.  In either case I get the spinning wheel and then either the adobe application fails ( disappears) or the system locks up and I have to do a hard stop on the computer.  All updates are applied on both the adobe software and on windows 10.  Have tried everything I can think of: run as administrator, selected smaller number of slides to be included when adding to time line.  Nothing seems to change outcome.

My previous post stated,When reinstalling PE 15, from disc, I get the message to install Adobe Support Advisor, because  "Installer failed to initialize". I am using Windows 10.I am not able to find in Adobe Downloads, Adobe Support Advisor thus I could not try using itI was able to remove both OOBE files;as recommended however that did resolve the issue.Is there a way to do a total uninstall of Photoshop Elements 15 and Premirer Elements 15. I trying to uninstall and reinstall to solve a PE 15 issue. Also, is there a way to respond to Adobe replies, rather than start a new discussion?

Can someone please tell me how to add a transparent eps logo to a video project. Does Premier Elements accept eps files? Thank You.

When reinstalling PE 15, from disc, I get the message to install Adobe Support Advisor, because  "Installer failed to initialize". I Am using Windows 10. Also, I tried to indicate a "CORRECT" response on a previous post and the link provided did not work.

I just bought a new Dell laptop, 2TB, 16 GB RAM, Intel core i7, 8th Generation; basically one of Dell's top laptops as far as specs, but for whatever reason, PE 14 keeps crashing when I attempt to add a photo or video to the timeline. I tried uninstalling the program and reinstalling it which didn't change anything. Every instance where I tried to add a photo or video to the timeline, the program freezes for about 10 seconds, then the screen turns gray and I get the "PE stopped working" message and it kills the program.I had an older Dell (which was stolen) with lesser specs, but PE 14 worked brilliantly on it, so I'm a bit at a loss here. This is quite frustrating as I need to complete a work project. Any suggestions?

hellothe following is the screen shot of my computer propertydo these criteria meet the requirements for running adobe premiere elements 2018 smoothly?i have actually downloaded and installed adobe premiere elements 2018 on this computerbut there was an issuethere was no problem adding video clips to my project assetshowever, when i pulled a video clip onto the timeline, there was no reaction when i clicked the play buttonand after few second, the whole application kind of froze, and i have to force quit the applicationcan anyone help me with thisthanks

I am using Windows 10 with Premiere Elements 15 and I have totally lost audio in my projects. Photoshop audio works fine. Any support most welcome.

Das Abspeichern von Bilddateien  ist nicht möglich, es erscheint folgendes Fehlerbild:Arbeitsspeicherstaus des PC:Der Fehler trat wahrscheinlich nach dem großen Windows-Update (Windows-10) auf.Frage: Hilft eine Neuinstallation?

Adobe Premiere Experts, I will admit I am new to the video editing business and there may be a very simple solution to my problem.  Operator error is certainly within the differential.  Below I have included, my PC specifications, video card info, Adobe Pr version, and a freeze frame of the problem.   I can add *.mp4 video to my timeline, and play, but only the sound is previewed at this time.   When I first installed Pr elements, the videos very briefly displayed in preview, but this stopped functioning after adding several videos, and now will not work even on new projects.  I have tried clearing the cache, looking for updates, un-installing Adobe PS and Pr elements and re-patching, updating the Nvidia driver and deleting all video files and re-importing.  Nothing seems to allow these to videos to preview.  Clearly I am fumbling in the dark, someone please light the way.   

Helloi had adobe premiere elements 14 installed on my computer few years ago.now i am considering to upgrade to adobe premiere elements 18.so is it correct that i only need to pay 79 us dollar for the upgrade?if so, after the upgrade, i want to install this software onto another computer.so the the version that installed on my second computer will also be adobe premiere elements 18 right?thanks,Eddie

I shot a two hour video using a Cannon XA30 camcorder that records in MP4 format. It records both left and right channel as separate audio. When I imported this file into my Elements Premier 15, it lumped both audio channels into one!  I need to keep the left and right channels separate until burn time then merge into stereo.  Which program should I use to do this? My older version of Premier elements used to do that, but alas no more.

Recently Windows 10 did a major update.  I can still alter photos in Photoshop 14 however when I try to save it I get a message saying it can't be saved as there is not enough RAM.  Is anyone else having this problem? BJ

I had to tweak the speed of some audio by unlinking it from the video and speeding it up a hair. How do I re-link it back to the video?The instructions say that the option should be in the "clip" sub-menu but as you can see that is not the case. How do I do this?

Hi.  I have had Premiere Elements for some time now but never really used it.  I have use for the following and want to know if the Premiere program will do this.  Is it possible to have continuously looped video playing in the background and then have another layer of photos or other objects that will also play on top of this layer?  I have a project to do and need to know if Premiere can handle this.  If so, is there an example or two I can see and how complicated is it to do?  Thank you for any help.Jan

Running Windows 10APE 14 Movie Menu Disappears. I bring up a movie menu and edit it.  I change Play Movie to Play Program, and color it yellow. I also move it and the grey bar up a little.  I replace Movie Title Here with my Title, Running a Small Business. I save all. When I come back my title Running a Small Business is gone and it reverts back to Movie Title Here  But the editing of Play Movie is untouched. Thank you.Cheers! Phil

Bei mir steht das da und es geht nicht weg. Egal was ich mache. Es läuft weder das Programm noch irgendwas. Alles neu gestartet. Aber es steht immer noch da und ich habe keine Chance zu Speicher oder zu brennen oder zu exportieren. Stunden der Arbeit umsonst. Danke wenn jemand helfen kann

Me again. Now I have a problem with the sound. I can see it on the time line. I fades in and out as I instructed it to do. The sound came from spitting if off the video (separating it) the video plays but no sound comes out. I have gone and checked the original video - the sound is there as expected. I tried reloading the video and starting again. But no sound!! Help please> many thanks in advance

I load my project, it first come up with a window of which asks to skip, kip all, offline etc etc. I have tried several different buttons. But they all end up the same...loads the project with these red slides with writing on them only.I have spent many days working on my project. I came back to it yest after a couple weeks away. Now it loads only red slides with all different languages over the slides. Something about support media offline. It is on all the slides. The time line works with all the animations, but the pictures have been replaced. I went to the add media window to see the picture I''ve put into the timeline, now that has changed too. two arrows going around  circle and no pictures to be seen.What has happened?? I so far have not been able to use this programme and gotten any good results. Apart for the hours of time and the money, it is doing my head in!! What is wrong with it?