Premiere Elements

Hello,i am using Premiere Elements 15 for quite a while. Within the last weeks (did no use the program) a new error occured. I can create new projects and save them. I can reopen them and continue working.however - if i reboot my system (Win10 - fully patched), i am not able to open the project files again. Premiere says that the files are corrupted. this happens also with older project files which had been working in the past. i tried to delete all temp files (pre-rendering and all stuff that i could find related to the projects) - no effect.Is there a known bug with any Windows Update or so?Due to the fact, that i am using the Programm for my YouTube Stuff, i am in need of a fast solution. Thank you guys.Best regards,Santitan

Ich nehme Filme vom Fernseher auf DVDs auf. Im Computer lassen sie sich tadellos abspielen. Sobald ich den Film, der aus einzelnen VTS-Teilen besteht, in das Fotobearbeitungsprogramm Adobe Premiere 10 bzw. 14 hochladen will, erhalte ich jeweils beim ersten Teil nur den Ton, aber kein Bild. Bisher funktionierte alles einwandfrei. Wer kann mir helfen, woran liegt es?[Moved from the non-technical Lounge Forum to the Premiere Elements forum... Mod][Here is the list of all Adobe forums... https://forums.adobe.com/welcome]

Does anyone still have the 50p (or 60p) sequence.preset for Elements 11?

I'm a 1-day old user of Premiere Elements 15 on Windows 10.  Everything was going like clockwork until I closed the project, and tried to re-open.  Then I got a message saying the file format was not supported or I might not have the right Codec installed. All the imported clips are from an iPhone and thus in .MOV format.  After I close the error, Premiere ends up opening the project anyway, and I've successfully exported it to an .MP4 file.  Nothing seems to be wrong on the playback in Premiere or the exported file.  However, when I exit the project by closing Premiere, I get an error that "Premiere has stopped working".  Unfortunately, Adobe support isn't open on the weekend.  It all seems a bit shaky to me, and this is a very important project that is due tomorrow for work so I'm debating if I should just hold my breath and continue or stop and try to fix this (which is very risky due to my lack of knowledge on the innards of Codecs, etc). When I l

im thinking of buying adobe premiere elements 15 and was wondering if any special effects were included or if there are any free plugins to get things like explosions, gunfire, etc. into elements 15????? any help would be appreciated. i noticed i could get things like that with pinnicle for free but i want to get adobe because for the same price i can get photoshop included.

Ive have tried many ways to fix this problem and have spoken to the forums about this before and the problem has never been resolved. It seems people have given up or forgotten. Im going to retry and update you. The program wont even start up the start up page to get into the program. Ive restated computer, ive reinstalled it, which gets it to work then as soon as i close it down, id need to reinstall it again, thats too annoying. Please help and give me suggestions to fix this problem and i can say whether ive already tried it or not(i cant remember everything ive tried) If you could make the effort and help i would highly appreciate it.

Hallo,ich habe 2 Videos mit der Breite von 1280. Nun möchte ich die Filme nebeneinander laufen lassen. Ich habe ein Projekt gestartet mit einer Breite von 1920. Also verkleinere ich die beiden Videos auf 75%. Somit passen beide nebeneinander. Also so habe ich es mit Premiere Pro (testversion beim Freund) gemacht gehabt. Wenn ich nun versuche beide Videos nebeneinander zu setzen, sehe ich nicht alles auf der Arbeitsfläche. Also die sichtbare Arbeitsfläche ist kleiner als das Projekt.Wenn ich dann alles exportiere, ist alles richtig mit der Größe. Nur halt nicht auf dem Arbeitsbereich.Kann mir einer sagen, wie ich den Arbeitsbereikch auf die breite von 1920 bekomme?

Hey guys. I am from germany and my english is not the best but I have a question. I bought the program Adobe Premiere Elements 15. I installed it and everything was fine. I decide to open it to test if it work well. But it don´t opened. I become a error message that it isn´t working. In the messag stand that the program can´t performed cause of a problem and I don´t know why. I have enough memory and my cpmputer is new. Pls help me it will be great .

Hi there,I spend a few days shooting some video clips on my Nikon DSLR and make the rookie mistake of using the shutter speed to control exposure (I know to leave it at 1/50, but hadn't shot video for a while) and now, after shooting at faster shutter speeds, my video look jittery. Not over jittery, but enough that I notice a jitter/flicker rather than smooth motion of pans or of people talking to the camera.I am using Premiere Elements 11. Is there any thing that can smooth out the video for me? I read about using motion blur to give the sharp jittery video a slight blurr, but my version of elements doesn't have that.Do the later versions have motion blurr and will it work 100% to make the video look good?Anyway, any advice on how to "fix it in post" is appreciated. If there are any third party apps or software that can help, please let me know.Ronald

I'm trying to create an effect where a clipboard swings into view on top of another clip, partially covering it, and then swinging back out in reverse to the way that it swung in.  The clipboard is a PNG image file with a transparent background.I have successfully created the Swing In effect using the Swing In transition as follows.  The clipboard swings into view as if it were hinged along the right-hand side.At the end of the Clipboard clip, I want it to swing out in the reverse, again hinging along the right-hand side.  However, I just can't seem to make it work using the Swing In or Swing Out transitions.  Is it possible to do what I'm trying to do?

In the videos I've seen for Premiere Pro, apparently you can just change apply the "transform" effect and change the shutter angle. But in Premiere Elements, changing the value for the shutter angle does absolutely nothing. The effects page on the Adobe Support site says that the shutter angle control is an After Effects effect, but I don't know what they mean by that, since this is Premiere Elements, not After Effects. Is there another way of creating motion blur? Or if there isn't, how can I get the shutter angle control to work inside Premiere Elements?I'm using Premiere Elements 15, by the way. Just in case the version matters.

[German Text Below]Hello,i´ve Download the Trial of Primiere Elements 15 to test, if the Software works on my Computer.Specs of my System:| i7 6700k - oc 4.70GHZ stable 24/7 | MSI Z170A Gaming M5 | 32GB Corsair Venegeance LPX Rot | 8192 MB MSI Geforce GTX 1070 GAMING X oc. 2025 Mhz stable 24/7 | Corsair SPEC-01 RED | Samsung 750 EVO 500 GB | Samsung U28E590D 28" UHD | Corsair Hydro Series H100i v2 AiO |The Onboard Grapics ißve already activated. Both Graphic Cards are on the newest DriversAfter checking, if the Software will Work i had Buy the licence. I Activated PE15 an run it. PE15 started. i have work already 2 hours. everything fine.A few days later, i start PE15 again,( PC ran NO Updates!!!) but PE15 want to make an update of Something. And now i can´t start PE15. The failure is(when he try du load PlayerMediaCore.prm) : You have an incompatible Graphics  Driver. Please update the Display-Driver für a better an faster Performance.PE15 DOESEN´T start!!!!What can i do, to make

After importing my *.MOD moviefiles (from the JVC Everio camcorder), Premier Elements 14 is resizing the file, now I'm missing moviematerial on the left and right side (Only the center of the movie is still intact). What I see is a black field on both the right and the left, where I was expecting to see people. I've tried this: new file ->new project -> change settings -> tried every setting in the book, but the same effect still happens.What should I do?

My Premiere Elements 14 version has been working properly for many weeks, until some days ago, without any obvious reason that could be linked to the event (Windows/Adobe update), there was a change or bug during the youtube export. At some point you are always asked t classify your new upload into some categories. This field is no more active, at least it doesn't react to any mouse interaction. No big deal, I would say, but the field has to be filled to continue the export dialogue. Which means, I cannot do any direct export to youtube any more.Thanks in advance for all notices, that I can first export to a file and then upload to youtube, but for my father I would like to keep the prcess as simple as possible, and I simply cannot understand why it worked for a long time without any issues, and now it simply stopped wrking.Help or tipps and tricks very much appreciated.Regards Thorsten

I am using one of the wedding classic titles in Premiere Elements 15. How can I type over "John and Jane Smith" on template?

HelloI am using premiere elements and I have created a video project and the format is .prel. I am trying to convert the video project to mp4 or MOV but for some reason when I click File, the Export option is not highlighted. Any ideas why?Your help is much appreciated.

I recently installed Adobe PE, version 12, on a new windows PC, windows 10.  When trying to recover existing music to an existing project or add new music to a new project, I am receiving a new error message:  The importer reported a generic error. The music files attempting to be added have already been added/used/fully functional in other projects on the prior PC.  Checked for this error and just installed new updates as recommended, however the error persists.  Please advise

My premier elements was failing to launch after reaching the selector screen for PS, organizers, and premier. I tried running as admin, doing the ctrl, alt, shift thing I've seen people suggest, and searching for the lava program (I do not have any file with that name so I do not believe thats the issue here). I then tried uninstalling and reinstalling Premier and that worked for a few minutes. Then photoshop began to fail to launch and premier began failing to launch again. Included is a screenshot of the only error occurring at the same time the elements is failing to work. It does not list an adobe program as the issue but that is the only program I was attempting to use or had running and also the only issue on my computer currently. This has always been a Windows 10 machine and no new programs have been added recently. I am becoming increasingly frustrated as I need to use these programs for my business and now they are both down. Please help.

I have Premiere Elements 15 for Mac. I have been trying to superimpose a video of someone singing against  over another video. I have tried Videomerge but only bits of the background come through. I have also tried making mattes in Photoshop, but even though I have been following directions to the letter, the mattes don't work. Nothing works, except for a 4 point garbage matte. Even with adjustments, it looks awful. I wanted to superimpose the singer, not put him in a black box. I have been at it for hours and have searched the manual and these forums for ideas. I still cannot do this. I've tried using Difference Matte, Track Matte, and Non Red Key as well. I've tried so many things that I can't remember them all, and my head is spinning. Will I have to re-shoot my footage against a green or blue screen? I used black because that was my friend's setup. I hope someone can help me.

I have CC for Ps & Lr. Have run concurrently with APE 14 for months. No issues.  No recent updates that I am aware of since I used APE 14 last. Message recommends re installation. Attempted re installation of APE 14 - seemed fine but got message that it had not completed as it was aware of pending restart. Restart had no effect. .

Hallo,I have got a Nikon which makes videos only in mov-files!Is Premiere elements compatible with the mov-files? Do I have to consider anything? Which versions from elements are not compatible with mov-files?Thank you in advance!

After not using Elements for a couple of months, I recently tried to open a new project and cannot capture DV footage when adding media. I can add pictures and music, but every time I try to add DV material, I get the message, "Adobe Elements 12 has stopped working, a problem caused the program to stop working correctly."I tried the below tactics without any success:I removed contents in media cache files (also removed every item in media cache folder)unistalled and reinstalled program many timesupdated graphics card driversreverted graphics card to 2016 setting (tried all 3 versions listed below)reinstalled with a different user namedid disk cleanup and defragremoved Adobe Premiere Elements pref fileswitched project destination from C:\ to external driveright-clicked on program icon to run as administratorremoved Adobe Flash player and rebootedDell XPS 8700 desktopWindows 10 64-bitIntel Core i7-4790 3.60gHz CPU12 MB RamUsing NVIDIA GeForce GTX745 display card with6.27.17 update to 22.

On startup of the video editor, CFHDDecoder64.dll is missing.I have tried running the main program as administrator.

I have installed Premiere Elements 15 onto my Windows 10 machine a while ago and today is the first time I've used it. When I import videos there seems to be no sound from my speakers, I have used version 10 of this software for a while now and regularly use Magix Movie Edit Pro so I am a little familiar. It doesn't seem to matter which format MP4, WMV or anything else just no sound.I can see the audio track in the timeline but nothing from the speakers any help would be greatly appreciated.CheersS

Hi,I have an LG Google Nexus 5x mobile phone which takes videos in HD (H264 - MPEG 4 AVC 1920x1090 @ 30FPS) and also 4K (H264 - MPEG 4 AVC 3840x2160 @ 30FPS) videos. I downloaded the files from the phone to my desktop in order to open/import it into premiere elements from there. But it doesn't work. When I try to import any of these files there's always a "general error" popping up in elemens. What's wrong?