Premiere Elements

Bonjour.Dans Premiere Elements 2022, est-ce qu'il est possible que le changement de vitesse se fasse de manière dégradée ?Cordialement

I just bought elements to begin editing videos. However, I'm unable to import any video of any length into the software to begin editing. Anytime I try, it says, "This type of file is not supported, or the required codec is not installed." Any help or advice is appreciated.

Hi,I found this scratch disk location bug with Premiere Elements 2021, but the same problem exists in 2022. I open a project and change locaion -Now I make changes to my project, save it and open the project again. I find the scratch disks location have been changed to original -Now I open the file with Premiere Elements 2018, do the same and now eveything is fine. The reason I want to keep the scratch disks location separte is to keep the project folder clean. But now I cannot. It looks like garbage -With 2/3 updated after the release of Premiere Elements 2022 for Windows, I believe Adobe team took this application seriously. My request is to look into this issue and fix it before the next release.

Hello, I upgraded  from Elements 16 to Elements 2022 and now some things don't work as well as they should, or at all! I'm on Windows 10 on a fast machine purchased for film editing.Pan and Zoom shows me the whole video clip that was filmed, not just the segment I want to work on, so I have to guess where to put the boxes, check the preview and adjust, time and time again to get the zoom or pan where I want it to be.If I use an old video (not filmed in 4K) as B roll, there is some weird metalic fuzziness on my finished video as it transitions from the old footage back to my new 4K footage. I can't see this in Elements while I'm editing, it only shows once the video is exported.All transitions, like film fade or cross fade, also have the metalic fuzziness on the finished video, but not on the timeline.Any suggestions for how to change these issues would be very gratefully received.

Hello, I just purchased and installed PRE 2022 v20.0 (20220702.Git.main.e4f8578). My video card (NVIDIA GeForce GTX 1050 Ti) is listed as a recommended card. It is detected by PRE 2022 but it is not supported. My PC runs Windows 10 Pro v21H2 and the CPU is Intel i9-9900K w/ 32GB memory, C drive is Samsung SSD 970 PRO 512GB, D drive is WD Black 2TB HDD. I have the latest NVIDIA Studio driver installed for the video card. Also, the video card IS detected and supported by PSE 2022, and PS 2022 v23.4.2. Is there a solution to fix this?Thanks for your help. A few screenshots are below.

I've been using APE 11 since its release, to edit my holiday movies, and have had no previous problems with it. However, for part of the movie that I am currently editing, the video is running slowly and is out of synch with the audio. The clip in question is of considerable length - around 50 minutes - and I'm wondering whether this may be related to the problem, although another possibly relevant factor is that, unlike the rest of the movie, the clip is from a Samsung Galaxy 'phone, whereas the rest of the movie clips are from a JVC Everio and an iPhone. Thanks for any advice.

I just installed Adobe Premiere Elements 2022 and to be honest I'm shocked by the performance! Everything is jerky and sometimes takes seconds until something happens! Even Drag & Drop of some pictures to the timline is a mess.I am using an iMac 27" 2020 with macOS Monterey 12.4, 40 GB RAM and SSD.I do not need all the possibilities of premiere pro, so i bought PE 2022. But now i am very unhappy to have spent money for that....Also the "Update-Button" is grey and cannot be used. The istalled Verion is 20220702.Git.mai.e4f8578...

Hi,i want to use the Motion Titles. I can put one of the available Motion Titles to my timeline and that works. My question is, how can i change the default background picture of the motion title?When I go to the background tab there is a dropdown with a selected "Backgroundimage" but no option to change the image. How can i change it? Thank you

I would think this is a simple task, but I'm not finding how to replace an existing picture with a different one on the timeline. I've finished adding transitions and music, so I'd like to keep all that in place. Is there a way to simply replace an existing picture for a different one?

What is the easiest way to use the Photoshop Elements Organizer with Premiere Elements? By search on Adobe Support I found the following on how to use the Photoshop Elements Organizer with Premiere Elements:Right-click/Control-click the media file, and select Edit With Premiere Elements. . . .You can open Adobe Premiere Elements for editing video files using the Editor > Video Editor option in Elements Organizer.Organize your photos, video files, and audio clips in Elements Organizer, and drag them onto the Adobe Premiere Elements Project panel.(1) The first 2 don't work because I get a box telling me to install Premiere Elements (already installed, with a permanent license) from a DVD, or to download it from Adobe. So the only option is to drag individual files onto one of the editing pages but I would love to be able to do the other 2 from the existing organizer which contains hundreds of videos already tagged etc.(2) I also cannot open Photoshop Elements Organizer from the home s

I purchased the full version and put in the serial number - but the watermark is still there.  How do I remove it?Thank you.

Hello...I need help with title effects.. I need to make a "Star Wars" effect for the intro title but I cant seem to find the way into the Basic 3d effect, can anyone help me with that? By the way 🙂 I'm using Adobe elements 2018 Martin 

Hi everyone! I recently picked up Adobe Premire ELEMENTS (the 2021 version) for the first time ever to help me make reels for instagram, but for the life of me I can't seem to figure out how to use some of this programs settings. This is despite their being a beginner mode and an expert mode.For some reason, some of my settings appeared to be "locked" and I do not know why. Can anyone tell me why this is and how I can fix this?My copy of Adobe Premire ELEMENTS also seems to look fairly different compared to some of the versions that I've seen in Youtube channels which kind of just adds to my fustration.    Text edited by mod: changed Pro to Elements.

Is is possible to crop the sides of my video to narrow it? I dont want to scale it cause that zooms in and i dont want to do that. The recording is wider than i want, but I cant find a crop tool anywhere. I use Premiere Elements 2022.

Hello.I bought HEVC codec on the MS Store but the file still won't import neither in Premiere Elements nor in Elements Organizer. The files are from an iPhone 11 so should be pretty standard. Everything works fine with HEIF files or playing the HEVC file in the default reader from Windows 11.Also, if the problem cannot be resolved, does someone know how to get money back ? It seems required to contact support but none seems available.

I'm finding conflicting information online and even within the adobe website. A live agent informed me that it's not possible with Premier 2022 but IS possible with Premier 2019. But this same rep also told me that the whole CAPTURE feature is not available in the 2022 version, which doesn't seem to be accurate. I'm just trying to find out if this feature is available, otherwise I will have to find another program to use instead. I'm also a bit frustrated that it took almost an hour of research and support with no clear answers. ThanksAlso, the topics listed below are very limited and don't clearly cover everything.

Hey all I have an annoying problem and I cannot find any help on the Internet, so I am asking here to help me troubleshoot. I am working on a video where I have recorded all my "footage" using OBS Studio to an MP4 1920x1080 30fps video. When I watch each individual raw video footage in VLC, they are 1:1 of how my screen looks like and I can easily read the text:  However, when I import these videos (which are all in the same format) into Adobe Premiere Elements, some are rendered as expected:  But for some reason, other videos are imported very pixelated: And the exported video gets this problem as well. I have tried;- Reanalyzing the video- Moved the raw video to a new location and then in Premiere retarget it- "Replaced Footage" with a copied version- Rendered the video preview frames I have no effects on either video, I've just been splitting. And if I check properties of a working video vs a pixelated video, they display the sa

Ich bin am Verzweifeln. Nach über 100 Stunden ist mein Film fertig, aber leider ist der Export nicht möglich. Immer kommt eine Fehlermeldung und zwar egal, welches Ausgabeformat ich wähle. Auch das Rendern dauert ewig und irgenwann stürzt das Programm ab.Was kann ich machen, damit ich doch noch zu meinem Film komme?Herzlichen Dank für jedwede Hilfe.

Hi Team I am using Adobe premiere elements 2021 getting this "error compiling movie. UNKNOWN ERROR" can anyone provide advice on how to resolve. Thanks Joe

Photoshop Elements Premiere 2020 -- In the past I could have a title page of a movie that showed the title and subsections of the movie. When clicking on the subsections, it would go to that part. After an update, I can't find it. Does anyone know what it is called and/or where it is?  Thanks.

Previewing video would just randomly stop playing. You'll have to hit play to continue.This causes problems when adding Narrations. Again, this is totally random, sometime it plays for a couple of seconds, sometimes a little more but it always stops randomly.

Hello, I am having trouble using my Bose 35 headset with Premier Elements 2021. When I add it to output, the sound of the recording is in slow motion. When I change the Default Audio Input to "No Input" I cannot control the sound volume on my computer (Macbook Pro M1) Please advise. Thanks.

I've been having WYSIWYG issues with keyframing on PE14 where the output doesn't match the preview.It happened on Windows 10 and 11... Does anyone know what causes this? Attached pics for example. 

Although APE doesn't always freeze but it does freeze quite frequently when applying Hollywood Looks. At that point the only choice you have is, you kill the task and then relaunch APE and start all over.

I have music concert DVD and Blu-Ray discs I want to rip and then extract specific video song files (to add to a video playlist I later compile) using the latest version of Premiere Elements. What is the easiest and best way to accomplish this?