Premiere Elements

I have several tracks in my song. I want to sometimes have a lower track appear on screen, and other times have the upper track appear. So, I know to first use the scissors tool to put a separation, ie, in the upper track at the point where I want to see the lower track. However, I'd rather not delete that segment of the upper track yet, since I may want to change the timing in the future. Is there a way to just silence or turn off a part of a track. I know you can silence the whole track at the left of each track, but, as I said, I only want to quiet one segment of a track at a time. I guess I could use more and more tracks for each segment, but I already have a bunch of tracks.Hope that's clear. I could reword it if needed.LNovik

Hello everyone. I am looking for advice on improving my workflow and hardware of a new PC. Hopefully the many experts here can set me in the right direction. Thank you in advance. I use Premiere Elements 2021 to process videos of my kid's soccer games. The videos are just for parents (“Look at Jenny’s goal” that sort of things). Also my daughter goes through them to see how she can improve. Games are recorded on my phone. I set it up at one corner of the field at about 7.5 feet high, pointing slightly downward. The recording settings are UHD 4K, 30 FPS, wide angle (0.6x), and HEVC/H.265 encoding. I need to use wide angle to get the entire field. The position of the phone/camera is basically a rough guess because I can’t easily see the screen or make fine adjustments once it’s up there. But the wide angle gives me plenty of margin. I use only a few effects in Premiere Elements 2021 on the videos.Corner pin: Because of the downward pointing camera, vertical lines aren’t ve

Every time I boot up Premier Elements (2021), it makes me have to dismiss the screen shown below.How can I get that to stop, and go straight to the editor? 

El programa adobe premiere elements 2022 ha dejado de procesar, renderizar, los videos que he montado y estoy montando. No los exporta ni los comparte. No funciona correctamente

Here's an excerpted image from Adobe Premiere Elements 2022:The green audio clip at right (VID) worked fine. I added the green one at left (DW). Now the green one at right is silent. Using Undo did not restore sound to the one at right. Any ideas what happened?

I just tried to use Premier Elements with my iPhone photos but they wouldn't import. Looking into forums or the web reveals that this is a known issue... so I don't get it, most media developers work with photoshop and mac and iPhone, why not fixing this issue. I do have an iPhone X and started to import into Premier Elements 2018 latest version. When importing the photos onto my Mac with PE2018 it gives me an error that the codec is not supported. It's defiantly not an option for me to convert my files to another format because I have to convert a couple of hundred and thats a no go... Hase anyone a solution for this. Again, MAC latest version, iPhoneX and Premier Element 2018 latest version. Many thanks in advance,Chris

Hello. I am using the Defuault Roll text feature, but it goes much too fast. Is there a way to slow it down? I tried slowing it down using the Time Remapping tool, but it doesn't let you do it on text. ChickenKid21

Is there to make videos without a watermark using using an unpaid trial verion of the software

Hey all - I made a video that renders fine in the editor, but then has a bunch of weird graphical glitches when I export it. All of the clips are recorded on my Pixel5a in 1080p quality, and I tried to export that way as well. On export, only a few of the clips in the project hit the error, so I'm completely unsure what is wrong here. Can anyone help? 

Hallo, nach dem öffnen eines Videos in Adobe Premiere Elements 14 ist das Video asynchron. Das Video hat eine Länge von 32 Minuten und ist 3,54 GB groß.Ich habe das Programm schon mehrmals neu gestartet und neue Projekte geöffnet. Doch es passiert immer wieder dass das Video asynchron ist.Wie bekomme ich die Asynchronität weg?Vielen Dank!

Recently purchased PE2022 The PE2022 fixed the audio shift problem but I have encountered a video problem. Importing video camera files that are about 7 – 8 Gb. The files are taken from a HDMI to USB converter and then transferred to the computer hard drive, then imported to PE2022 Project Assets. This is all 1280x720 29.97 fps I know the converter works because I can run the same clip in PE2021 getting a satisfactory picture. With no further editing the playback and rendered results are a fragmented video on both the preview screen and the resulting .mp4 file. Tried everything I can find in the way of settings with no avail. The only solution to get a satisfactory output is to run the original file through Hand Brake. Do you have any suggestions?

I need to purchase Premiere Elements 2021 instead of 2022 as V2022 is not supported on Mac OS10.14 (Mojave). I have downloaded the trial version of 2021 but when I go to purchase it, the purchase checkout screen lists out the purchase details for V2022. If I go through with this purchase, will the serial number I receive for activation work with the V2021 version. Thanks

Hi !I wonder if I can buy packs for Adobe Premiere Element such as Title Pack or transition Pack, or sound, etc.If it is affirmative, where ?Tx a lot !

Hey guys... super quick question. Is there a way to get Adobe to default picture length to shorter than 1 second? No matter what I do, I can't get it shorter. I recently finished a stop motion project that had probably at least 1,500 pictures or more, and I had to manually drag each of them to a shorter length. I experimented with using time stretch, but I was constantly adding new pictures to the project and time stretch didn't seem to get the same length every time, so I had to keep manually dragging them shorter anyways. Is there a better way here? Thanks!

Since I purchased PE 2022 it has not stayed operating beyond a full minute. After a few tasks, it will crash instantly. To add further frustration, when trouble shooting, Adobe asks to make sure Premiere is  to date on the Creative Cloud. For whatever reason "Premiere Elements" cannot be seen on the Creative Cloud. Only Premiere Rush and Pro are available. Everything else is up todate, what am I missing?  

Preimer elements 2020 will not run outside of my works network. I can install it outside of work from my home.  However, the Premier Elements fails to load at the "quicktime.prm " component of the install.  The program then shuts off with no error message.  Once wifi or ethernet is available, program launces and runs correctly. Had this behavior once before when running windows 10.  It is now doing it again inside of Windows 11.  My district tech hasn't sussed it out yet. Software installed in defaults locations.  I run as an admin or not.  Only time it work is on wifi for the district or ethernet.

New to Premiere Elements 2022. Have used Premiere CC for many years. I'm playing a video I know has audio (played in Mac Finder just fine)I can see the audio waveforms. I can see the "Master" meter in Premiere move.Audio Hardware set to System Default HDMI.Master Clock: System Defaulr HDMI. HDMI monitor hears the audio when I play the clip in the finder. I can hear system beeps. I cannot hear the audio from the timeline.When I go into additional "settings" in the Audio Hardware preferences,To set up "Audio Devices" it is set to HDMI outputI can "Configure Speakers" and I can hear white noise from left and right. But I cannot hear my timeline audio. Somewhere in Premiere the audio is not making it to the system to gome out the monitor's speakers. 

How can I create a vertical video please (to be used on Instagram or TikTok, for example)?When I want to change the project setting, I cannot change the size.When I go to "new project", I can't enter a custom size. I have to choose from preconfigurations.Thanks for your help!

Hi all, this problem appeared two days ago and I haven't been able to find a solution; any advice or ideas would be much appreciated as this is driving me crazy. The problem: I want a section of audio to fade in, say, so I put in the nessicary keyframes and I get a linear fade between the two points, which is what I want.        I save and close the file. But when I re-open it the same fade looks like this, even though none of the settings I can find have been changed and it's still identified as the linear option.I've tried compensating for it with the other options but that proved tedious and the results not great, espcially on a large project with a large number of little volume adjustments. I've scoured the program looking for a setting that could've changed (I have, however, only been using P. Elements a few months so could've easily missed something). I've tried uninstalling and reinstalling the program but that changed nothing. &

How to increase video resolution using adobe premiere elements 2022 by resizing and increasing resolution a video from MiniDV videotape? Also how to enlarge things from videotape with better resolution like seeing better someone from far away. Also how to increase brightness from darkness and increase darkness from brightness from videotape.

Bonsoir !! En fait j'en ai déjà une petite Tablette graphique XP-Pen Star03 ( je l'ai payé 60 euros et je m'en satisfait pleinement ) mais elle a pas d'écran intégré du coup c'est la misère pour dessiner, j'y arrive pas du tout. Soit je regarde la tablette mais je vois pas ce que je fais, soit je regarde l'écran mais je vois pas ce que je fais non plus. Le seul moyen ce serait d'avoir un strabisme mais j'en ai pas. Du coup j'ai jamais vraiment dessiné avec et elle ne me donne pas envie.Alors j'aimerais bien me tourner vers une tablette graphique avec un écran, voire même de dessiner directement sur une tablette classique avec un bon logiciel genre Sketchbook.J'ai notamment trouver la wacom cintiq 13HD et la XP-Pen Artist 16 Pro ( https://www.xp-pen.fr/goods/show/id/265.html ) mais je sais pas lequel choisir .j'avais fait de nombreux comparatifs entre les marques, et franchement on peut pas dire que Wacom soit franchement en avance sur XP-Pen.Wacom est la meilleure marque de tablette gr

I have a couple of questions about the programme.Does elements have a histogram?Would it be able to use proxy files?And would it be able to edit 4k?  Thanks for your answers

Hello,I have Premiere Elements 2021. I run the application on a Dell XPS 9500 4k (NVIDIA GeForce GTX 1650 Ti). I have two external QHD monitors. I need to use the application on one of the external monitors which is not the main display. I can open the application on this monitor. However if I try to maximize the window or simply resize the window, the application jumps to the main monitor automatically. What is the problem? Thank you for the support

I have a long video that I'm planning to upload to a YouTube channel. Because of its length, I need place bookmarks that several intervals, so the viewer can jump to specific topic.  Can this be done in Premiere Elcmnt 2022?  Or it best done after uploading to Youtube?Help please.Cheers,Andy

I'm new to this forum and I don't shoot (or edit) much video, so please excuse my ignorance. I mostly shoot stills and post-process with Lightroom.I have Adobe Premiere Elements 15. I want to take a video recorded (on my Sony RX100M6 in portrait mode) to fit into a PORTRAIT shaped frame on a PowerPoint slide.  On the PowerPoint slide I have reserved a space for a portrait oriented video.  I need my video to fit into that space. I already to know how to rotate the clip and how to scale it so I get rid of the black bars, but the final product is still in landscape orientation. I need the clip to fit into a portrait frame without the black bars.When I go into project settings Edit>Project Settings>General>Video I see the landscape orientation of 1920 x 1080. I want the reverse (1080 x 1920) but the numbers on the screen can't be edited (even though they are not grayed out).So ... what's the easiest way to produce a video clip that is in portrait mode (1080 x 1920) witho