Questions

I am running Mac OSX 10.13.6 on an iMac, 32GB RAM.I recently went to AME 2019.  I export a QT reference from Avid.Bringing it into AME, it does not see the video, only shows the audio.I have re-exported the ref file from Avid, checking all settings.The file plays back fine.  The only thing different is the AME version.  All was fine previously,on AME CC  2015.3.  I am also unable to open 2015.3 now,after uninstalling 2019, which I thought perhaps was causing a conflict.Thoughts?

Is there anyway to pause the current video I'm queueing  in the media encoder in favor of another video?  Or would I have to wait until the first video is finished queueing  or cancel it out for it to queue a different video? I've tried pausing the current video that is rendering and queueing the other video, but every time i click" ready" it just renders the first video instead.

Hello,So following these instructions I was able to batch export AI Illustrator files to PNG.IMCOMPLETE SOLUTION:You can add the .ai files to the queue. I set up a pre-set with the following settings... Format: PNG Keep Export Video checked but uncheck Export as Sequence. Match Source for the other settings. Then add the .ai files to the Media Encoder queue and run the queue.MY QUESTION:So with the "Imcomplete Solution" above I was able to batch export lots of AI files BUT I was not able to export the files in high quality, I tried all settings available but exports come out pixelated. Does anybody know how to export in high resolution? with multiple .AI files?

I have the following error since CS6 when exporting some videos: Export Error. Error compiling movie. Disk Full.All my drives have plenty of space, NTFS 7200rpm, everything was fine with CS5.5. Same problem with Encoder or Premiere Pro.Much of the stuff I export is going fine but I have this error with some sequences and formats.It always crash to this error when exporting sequences with "Match Sequence Settings".For one of my projects, when exporting to wmv, out of 6 sequences one always crash to Export Error. Error compiling movie. Disk Full. If I encode those sequences to mpeg2, everything is fine.I installed the new update this morning but it doesn't help.

Hello,is there a way to limi the media cache use in AME?There is an option in Premiere to limit it to a certain GB size - that option is missing in AME.The result: I cannot have AME run without watching it because it will fill up my drive until it crashes.thanks!

Hey  i edited  in a 1920 by 1080 29.97  setting and I have   to convert a file to the following specs format: MXFbit rate: 30 mbpsResolution: 720 by 480aspect ration 4 x 3Frame rate: 29.97Chroma forma: 4.2.0bit depth: 8 bitsscan type: interlacedvideo standard: NTSC I noticed that when i put the Format MXF OP1a and Present IMX 30 NTSC  in media encoder, it automatically goes to 720 by 486 and I can't change. Not sure what to do. Any help would be greatly appreciated

Hey I recently Joined Adobe After Effects ive already known how to use it and everything else but one app that annoys me so much is media encoder. I simply cant be patient anymore. Everytime i try to render a project it starts rendering like nothings wrong but later come to find out, It Failed this is the error logA Few things before you respond. Ive turned Cuda off and tried and it ended up in the same situation. Another thing is that this has been happening for 3wks. I talked to a adobe tech support and he couldnt figure it out. so is this a adobe situation? He reccommended iw wait for cc2020 like what? So ill be pay till adobe decides to fix this issue or something. im  not sure but it would be great to whoever replies to this knows this isnt a new thing and has been happening to a few of us.Render ErrorRender returned error.Writing with exporter: H.264Writing to file: \\?\F:\Uploads\Bhad Bestie.mp4Writing file type: H264Around timecode: 00:00:05:19 - 00:00:05:36Rendering at of

Hi,I've noticed that the default "Match Source - High Bitrate" preset for exporting in HEVC (H.265) in AME (v13.0.2) and Premiere Pro (v13.0), uses the FRAME BLENDING option in Time Interpolation, which can cause a bit of frustration to those using that preset if they don't understand why their renders turn out weird. All the other H.265 presets in the lists use the FRAME SAMPLING option as per normal. So changing the default time interpolation to frame sampling is a fix I would like to recommend.Oh, and also weirdly, the preset renders a 1080px high sequence to a 1088px high render! Another fix/ explanation needed!Regards,Michael

Hi, I wish i could find this solution without having to post a thread but i don't know much about encoder so here it goes.the log says :- Encoding Time: 00:00:0103/19/2019 03:40:21 AM : Encoding Failed------------------------------------------------------------Export ErrorError compiling movie.GPU Render ErrorUnable to process frame.Writing with exporter: QuickTimeWriting to file: /Volumes/ELPIX Video/Master Final Videos/Personal/Vlogs/Sugarpine Inspiration_2.movAround timecode: 00:04:20:20Rendering effect: AE.ADBE SubspaceStabilizerRendering at offset: 130.600 secondsComponent: EffectFilter of type GPUVideoFilterSelector: 9Error code: -1609629695I am using iMac pro, Encoder 13.0.2 and Premier CC the most recent update.  All my files are in Lacie 2TB SSD drive connected with USB C cable to the mac.The failed footage is from DJI mavic 2 zoom, and film convert has been applied , as well as a movie bar.  Media Encoder failed to export the video (Btw i am using Open CL for render

Where is the Plug-ins folder for Adobe Media Encoder for Mac?I've searched the web and cannot find the right answer. I have found the location for Premiere (which I don't have installed) and the location for older versions, neither of which exists on my Mac.I am using AME 13.02 (build 39).If it helps, I want to install the WebM plugin created by fnordware but don't know where to put the file.Thanks

Hi! I am posting this here as I couldn't find any other suitable avenues to solve my problem. I am trying to merge a set of short video clips (some .MOV, some MP4); however, when I try to do some with this app, the end result has a greenish-purple distorted colour. I have only recently downloaded the app and am a beginner with it. I have tried multiple different outcome file sizes and types all with the same result. Any and all help welcome! Cheers.

As in title, I would like to import .ae project to encoder to batch all compositions, and it doesn't work. Video below.My spec:Adobe Media Encoder CS6 (6.0.2.81(64bit))After Effects CS6Mac OSX 10.8.2Project don't have any third-party plug-ins

Hi,I'm trying to finally render out a large project, the project file is ~4.5mb and the final render is about 45 minutes long, and have run into an issue. When Media Encoder gets about 1/3 the way through the rendering process, my hard drive disconnects, ending the render prematurely.Possibly Relevant information:Premiere Pro and Media Encoder are installed in and run off of an SSD that I use for my main Drive (C:).The project file, the data, and the file destination are all on a 4TB HDD, Drive (E:).My hardware is:Processor: Intel Core i7-6700 CPU @ 3.40GHz / 3.41GhzRAM: 32.0 GB DDR4System: 64-bit operating system, x64-based processor.Windows 10 Home.I am really not sure of how to proceed, but I'm going to try to restart my computer and render it to my (C:) drive to see if that helps, because after i restart my computer the drive is mounted again, it's just that Premiere or Media Encoder somehow forces it to dismount mid-render.I had considered the possibility that the render was overt

I've set up AME on a second PC that I want to use for all rendering.  Got watch folders set up.  I save PPro projects to watch folder and it gets processed automatically.The problem is, our videos all end with a MOGRT (motion graphics template) and as an outro, but this AME won't render this, I get "Media offline" error as below.I can export fine from my PC, either exporting direct from PPro or queuing to AME.  The projects I work on are all on a network drive, and on both PC's the drives are mapped to the same letter so the locations use exactly the same url.  The MOGRT is saved in my Creative Cloud libraries, and I drag into any projects that I'm working on, as it's a standard outro template.How do I get this working?  The whole point of rendering on a second PC is to free up my own so that I can carry on working.Thanks in advance.

!!!! Disclaimer: NVENC-export is third-party software that is not supported by either Adobe or NVidia. It comes with no warranty -- use at your own risk.nvenc_export is a NVidia GPU-accelerated H264/HEVC export-plugin for Adobe Premiere.  It is a "proof-of-concept" that provides quick encode times by offloading the computationally intensive video-encoding operation to the NVidia GPU's dedicated hardware block NVENC.Compared to high-quality software encoder such as x264/x265, NVENC currently produces inferior visual quality and compression efficiency.  However, due to the nature of fixed function hardware, it does offer significantly faster encode times than software alone, with significantly less power consumption.  The speed advantage is helpful for turning out many draft-quality videorenders quickly.Moderator Note: Removed. Download links are not permitted according to our community guidelines.Minimum hardware requirements: (1) NVidia Kepler GPU    (a) f

Hi all,First of all I can't use the latest versions of after effects and premiere because it crashes when trying to start up the program. So I am using the version before. Second, AME sometimes gives this error.Export ErrorError compiling movie.Accelerated Renderer ErrorUnable to produce frame.Okay, but when closing everything and opening it again and finally being able to render. The footage that has the Keylight (1.2) on it shows as if missing (with the SMPTE color bars). This is while trying to render it as H.264 (which I would rather do on AE but it doesn't show up). I can render on AE with Quicktime Animation which is a work around but I just don't understand why this requires such a work around to get this working. So, my question is how can I fix this?I am using windows 10, Nvidia GTX 1080 (which is on its latest update), intel 17-8700k, 32 gb RAM.Build 13.0 with AME Build 16.0.0 with AE

I have tried to import J2K files (MXF and other) produced by the Kakadu encoder (from Resolve) - to no avail - I specifically used IMF packages in order to produce standard BCS profiles.For RGB files, I keep getting "Invalid format or damaged file".Some YUV files can get imported but do not render correctly.These files are decoded just fine with all other tools, including ffmpeg.Is the problem with the Adobe decoder?Here are some test files:Dropbox - Resolve-Kakadu-IMF-Tests - Simplify your life

It crashes when it gets to "LoadingImporterPhotoshopAE.prm  I've already reinstalled and did not solve the issue,

Hey guys! need serious help. I used to get hardware acceleration on both premiere and media encoder initially but now somehow media encoder fails to detect it. So everything i export is using software acceleration. However, premiere detects my Radeon 570 card and drops down OpenCL settings. How to fix this? It annoys me a lot! Will re-installing from creative cloud helps?Thanks.

I just recently updated PPCC 2019 and I have had several crashes when trying to export from PP. Im using a iMac Pro 3 GHz Intel Xeon W 128 gig ram with Radeon Pro Vega 64. This just started happening recentl. I recall it started during the last two updates.

So, here's a fun one. I have set exports in Media Encoder, they finish, say "done" and then I click on the hyperlink to take me to the file - and it doesn't exist! What? Please send help.Oh, for the people that will be like WHAT ARE YOUR COMPUTER SETTINGS?????? BECAUSE THAT ALWAYS MATTERS!!!!!!!! --- DON'T SPEC SHAME ME! Ok - so it's an iMac, High Sierra (IT guy won't let us upgrade to Mogave) Late 2015 model. I'm using the latest Media Encoder version.Some files have worked, some files have just disappeared. All of them exporting to the same place (a NAS) all of them exporting as H264's. Some files work, some don't. Some from the same project file. H E L P   M E   A D O B E.

Hi all, I could really use some help please, please, please.I've made a video in Premiere for a client that 5760x1080.I now need to supply him with a high res. .avi file.The only way I can export the media in the correct format is as a Targa sequence. QT, H.264 etc all won't export in that frame size. Would you guys agree this is the best thing to do? It's Mute so I don't need to worry about audio.Then I import the Targa Sequence into Media Encoder and there's no .avi export options. Another problem. Can anyone help?Thanks,Nigel

Hi we have very specific exporting formats, presets only work with ME 12.0 not 12.1.  ME 2017 or 2019 also do not let them work.  How can I get the version of ME 12.0 on my system??? Have spent a long time trying to figure it out, including pasting a version from a friend's computer onto mine via We transfer (I get error messages though when trying to open).Can anyone help me please?Thank you!

Hello, had this problem since the start of the year were I'd bring a video to be exported, into media encoder, get to a certain point, and either :1. the video would stop rendering, and say it came across an error (with the 'baaaa' sound)2. media encoder itself would crash completely, and pop up with a send crash report3. media encoder would just completely close itself with out a send crash report window checked the error log :------------------------------------------------------------- - Encoding Time: 00:10:2102/25/2019 08:13:40 AM : Encoding Failed------------------------------------------------------------A low-level exception occurred in: Mercury Playback Engine GPU Acceleration (CUDA) (AcceleratedRenderer:10)Export ErrorError compiling movie.Exception Occurred!A low-level exception occurred.Writing with exporter: H.264Writing to file: \\?\D:\Projects\Raw Cuts\UNO\this one 3432.mp4Writing file type: H264Around timecode: 00:13:03:27 - 00:13:03:40Component: Mercury Playback Engine

Hi,I'm using Afer Effects 16.0 and Media Encoder 13.0 When I start a render queue in Media Encoder (h.264) I have this error message...Render Failed because I have an alpha inverted matte layer (well I think this is the problem...) I don't have this message whit other projetI don't want to remove this effect I need it !I already tried to update AE and AME and it didn't work...Can somebody help me ? Thanks !PS...sorry for my english this is not my first language