Questions

I have 300 clips exported from premiere pro, they are all in order on my time line. I place them in a bing and then send to media incoder. They are all in perfect order, but when I export them, they are all over the place. No matter how I sort them, by date created, name, etc. they are all out of order. I looked up adding sequential numbers automatically to the exported files and two options are "add a # sign to the file name and they will be automatically numbered" but to do that I would have to manually go through 300 clips and add the # sign to each one.  The other option was to "create an ingest preset" but the feature to modify exported file names seems to be gone from there. Is there any possible way to add sequential numbers to my file names or just keep the files in order when I export them? It's a music playlist and they must be in order.

i wanna set-up a streaming website like Netflix and i just wanna find out if Adobe Media Encoder can help me accomplish the task.

With the older encoder the upload panel was always on the right side (I never needed to move it). Sometime after I upgraded to 2024 the panel disappeared. I haven't done any work in almost a year so now it's just become a problem. i upload to multiple locations.  Can't find that panel anywhere and can't find a post that anybody else is missing it (iincluding searching here) fp

Hi!When I use Media Encoder to export videos from Premiere Pro, it exports without any audio effects. If I export one by one at Premiere Pro itself, it works fine and all the audio effects are exported.It's frutrating, because I need to export several videos everyday, and exporting one by one is not productive. It happened with me in all versions of AME, both in Mac or Windows computers. I'm using now a laptop with Windows 10, Intel i5 8th Gen, no graphic video card dedicated.

TLDR: Hi. I need this setting to stick with the pre-set when I save the preset. Here is what I'm doing, to many hundreds of file - so it's important that this work and I can export the complete settings for my presets in a backup file. A watch folder has been set up to wait for a video file. (This happens in many many folder, but let's just talk about one.)The video is CROPPED in Media encoder, 4:3, to chop off the sides. The final video is square, with the 4:3 action area in the center of the square, with an overlay covering the blank spots that contains branded info.The CROPPED video has an overlay applied.The final video is EXPORTED to a 1:1 video with audio removed.I use SHUTTER ENCODER to add our branded audio file to every video because Media Encoder wont do this.Currently, when I save the preset, the crop setting seems to vanish and does not appear when I just want to edit a preset. Help! Any suggestions?

We have seen a lot of crashers with the "Insta 360 Reframe" plug-in in our Dashboard lately. I tested with the latest plugin from https://www.insta360.com/de/download/insta360-x3 in("Insta 360 Reframe" V2 build 20) in  the standard location on Mac, and it did not crash. Please verify if you have the latest version, and install it correctly in the default location.

My project fails to render in Media Encoder 25.3 (Build 73). At encounter of the first clip with stabilizer effect I get an error. In the Premiere Pro 25.3.0 (Build 84), the first frame of the stabilized clip is black, before stabilizing it was not black.Is this a bug in stabilizer or in Media Encoder?Can I rescue the project?Error:------------------------------------------------------------- Kodierungszeit: 00:00:0906/30/2025 02:58:36 PM : Codierung fehlgeschlagen------------------------------------------------------------Fehler beim ExportFehler beim Kompilieren des Films. Fehler beim GPU-RenderingFrame kann nicht verarbeitet werden.Schreiben mit Exporter: H.264Schreiben in Datei: /Users/res/Downloads/xyz.mp4Dateityp wird geschrieben: H264Um Timecode: 00:00:21:03 - 00:00:22:10Rendering-Effekt: AE.ADBE SubspaceStabilizerRendering bei Offset: 21.050 SekundenKomponente: EffectFilter vom Typ GPUVideoFilterSelektor: 9Fehlercode: -1609629695Help is appreciated! 

...

The Media Encoder 2022 seems to be buggy on my side. I usually select different sections of video and find out that the videos are exporting the same videos that I didn't ask for. Is there some kind of issue with Premiere's version when it comes to transferring the videos to Media Encoder for you guys or is it just bugged on my side? Usually, when I export things in bulk, I don't get this problem but it's been annoying and I have to double-check what actually exported correctly.

Hello,I want  to render a movie with subtitle into DCP format using Media Encoder.If I render in H264 format, I get the mp4 file with an .srt file, when I open the .mp4 file with VLC, I can include or not the subtitle, eveything works fine.When I render in DCP format, I do not find the subtitle file into de folder.dcp wich contains only video and audio along with the various XML control files. What am I wrong doing ?Thanks, Frank.

when i load media encoder i get a error window 'adobe media encoder has encountered an unexpected error and cannot continue … the load window was sitting at AEXD ... if i the unload and reinstall the app everything is ok … for that session I did a support chat and i feel had a poor experience ... the first call was disconnected with no explaination after asking me to re-name folder 'common' did not work. The second call i was almost immmediately asked to load software and do a remote session. My backgound has been computer security ... i was unhappy to leap straight into this option without looking for known errors etc first ... again this call was disconnected with no warning/explanation Is this usual? Is remote session the standard support route? If so I can build a 'support user' to limit their access. However, in a flash of inspiration I found the solution ... Due to my security background i am reluctant to give applications, under macOS,  access to di

Hi, Media Encoder 2021 will just stop once it gets to 100% and need a fix for this ASAP. I'm a youtube video editor so I use media encoder to export multiple videos at once. No crazy settings just Match source - High Bit Rate 1080p 60 videos. A 21 minute video takes 6 mins to get to 100% but then the bar just stays full and doesnt move? I have adequte space on my hard drive and have tried software only and still get the same results. This was never an issue in 2020 but really don't want to have to downgrade back to 2020 as that would be a lot of effort. Hope someone can help  

Hi, i have a problem. When rendering the project from Premiere, AME suddenly stops and a dialog like this appearsplease tell me to solve this.thx 

I am using Adobe Media Encoder. It gives me error "adobe media encoder has encountered an unexpected error and cannot continue" Please help me fix it. Thanks!

Is there a way to create a workflow where the tape name of the file take automatically his filename ?I can choose that in davinci resolve but I don't see how it could be in media encoder.For the moment I can only do this file by file when I copy the file name into the tape name from my metadata and it's exhausting...

Logs at the time of termination  Log file created: 10/19/24 17:37:32-------------------------------------Ticks = 516 <61280> <DynamicLink> <5> Increase wait time to 2Ticks = 3875 <19108> <IR.InitIpp> <5> ippInit warning: ippStsNonIntelCpu: The target CPU is not Genuine IntelTicks = 3875 <19108> <IR.InitIpp> <5> ippInit warning: ippStsNonIntelCpu: The target CPU is not Genuine IntelTicks = 3875 <19108> <IR.InitIpp> <5> ippInit warning: ippStsNonIntelCpu: The target CPU is not Genuine IntelTicks = 6110 <49052> <AnywhereLocalClient> <5> Local Hub HTTP port retrieved, port: 4373Ticks = 8672 <60828> <GPUFoundation> <5> Done loading modules, sec: 0.395488, device: CUDA(0)Ticks = 8766 <19108> <AMEApp> <0> Time taken to load MediaCore plugins: 310.164 milliseconds.Ticks = 9797 <19108> <AMEApp> <1> Entering RunEventLoopTicks = 10641 <19108&

Hi.I'm trying to export an .mp4 from an image sequence (.tif) and add audio to it using the "watch folder" feature in AME. Unfortunately, I haven't had any success.I read that it's possible if the audio file has the same name as the first .tif file, but it's not working for me.Can you tell me if this is even possible using my method? If not, how would you approach this if you wanted to automate the process?Cheers 🙂

hi there, media encoder just crashed and I lost all the queue items, any idea if I can restore the queue? many thanks

Bug Report – Freeze When Exporting with CUDA (RTX 5070)Product: Adobe Media EncoderVersion: 25.2Operating System: Windows 11 ProCurrent GPU: NVIDIA PNY RTX 5070 12GBCurrent Driver: Studio version (latest available at the time of this report)Previous GPU: NVIDIA RTX 4070 Super (Gigabyte) – worked flawlesslyIssue Description:Since upgrading to a PNY RTX 5070, Adobe Media Encoder freezes during export when using CUDA acceleration. The issue also occurs when exporting directly from Premiere Pro. There is no error message; the application just becomes unresponsive at a random percentage of progress.Project Details:Resolution: 1080pDuration: 40 minutesExport Format: H.264No heavy effects or LUTs usedNo preview rendering usedExporting with OpenCL works, but it's noticeably slowerSteps to Reproduce:Open a 40-minute project in Premiere Pro (simple timeline, no heavy effects).Send to Media Encoder.Set export format to H.264.Ensure CUDA is selected as renderer.Start export.Encoder freezes at a ra

Hello, my problem is that the export of a Premiere sequence with growing files source material in XAVC-I 1080p50 via the Media Encoder is very slow (30min sequence in ~12min) as long as the growing file is not yet completed.As soon as you stop the recording of the XAVC-I file and thus finalize the file, the export is much faster (30min sequence in ~3min)The comparison workflow in DNxHD 1080p50 also works perfectly with unfinished growing files (30min sequence in ~3min). Premiere Pro 2024 / Adobe Media Encoder 2024Growing files are created with EVS IPDirectorPremiere sequence settings for both Exportcodecs:DNX 1080p, 50 frames/secPreview: DNX SQ 1080p 50 There are no 50p sequence settings for XAVC-I I'm looking for a “same as source” workflow with growing files for XAVC-I 1080p50 - preferably without reencoding, so that it works as quickly as possible. Where can I look for my mistake?

Hi! For the past month or so muliple users in our studio have been getting this popup error message, "ReferenceError: BridgeTalk is undefined". It typically comes up in the background/behind our apps, as such, it has not been obvious what is triggering the error. We ususally only see it after quitting our applications – After Effects, Premiere, Media Encoder, and occasionally Photoshop / Illustrator. Recently have updated many of the video apps to their latest versions (24.6.1 as of writing), and that hasn't eliminated the error. Does anyone have anyone have any experience what might be triggering? Note, none of us are using Bridge, but I've posted this here because it has "BridgeTalk" in the error. We're all running MacOS 14.5-14.6.1 generally, on Mac Studio M1's Thanks!

So I just bought Creative Cloud and have just started to try to figure out how to use After Effects today.I have imported a movie and added some text animations, and I am trying to export the video to the Media Encoder but I keep getting the following error.AEGP Plugin AEDynamicLInkServer: Adobe Media Encoder is not installed. Please download and install it to use this feature. Go to https://creative.adobe.apps . ( 5027 :: 12 )After I click "OK" I get the next message:AEGP Plugin AEDynamicLinkServer: Failed to connect to Adobe Media Encoder. ( 5027 :: 12 )So I really don't know what do because I have just started using After Effects but I would like some input on how to fix it because I would be able to like to export a video at some point.The Render Engine is installed but whenever I try to open it nothing happens but After Effects opens again. At one point I had four After Effects open at once and didn't realize it.If it matters, I did install the CUDA plugin.So if anyone could give

I have tried a dozen different ideas from the forums and can't find a solution.Windows 10, i7-7600 cpu @ 2.80GHz8gb ramAME CC 2017 (version 11.1.2.35 of AME)Created a video in Premiere and AME just stops and hangs when it reaches a certain part of the video. Premiere won't export it either. I have created dozens of videos so I have no idea what's different this time. The video is about 10 minutes of 4k drone footage with a music back - super simple.I have reset Premiere (shift-alt on startup) and deleted all the cache files. I rendered the clip where encoder hangs and then added it back, then I deleted the clip entirely, then I deleted the clip and the music track and no matter - it stops in the same place every time (about 14% done with Premiere, and about 14 minutes in on what AME estimates is a 2 hour job).I read a few places that people had a "bad clip" in their video, and once they removed it it worked - how on earth am I supposed to find the one "bad" clip if premiere previews fi

Hey thanks for this spiuffy update. But sadly it is broken. It won't open. And crashes instantly. I've uninstalled, and reinstalled and get the exact same issue. Really annoying.

Hi I noticed on the latest Media Encoder 25.2 when selecteing MXF0P1a the time code shows as drop frames. My source is 25fps and im encoding as XDCAMHD 50 PAL 422 and also AVC Intra100 1080 but the time code at the bottom set start timecode shows up as 09;59;50;00 instead of 09:59:50:00Is this a bug? if so is there a fix?Ive had to roll back to 25.1Anyone else had this?Thanks in advance