Questions

The audio transition effects like constant gain, constant power, exponential fade etc. are very useful in Premiere Pro. But why these are not available in Auditon? Audition is an audio editing software and these awesome audio transitions are not available in Auditon!So, I request to add these transitions in Auditon. It would help many users.Thanks and Regards.

Hey Guys,  I have seen a lot of videos for Mac Users fixing this problem, but nothing for Windows.  I want to assign tracks to different inputs.  Track 1 - USB Rode Mic, Track 2 - Skype or other audio.  I was able to do this in Voicemeeter Banana, but for some reason it stopped working for me. Any thoughts on this?

Is it possible to remove a preset that is no loner shown in the history for a file? I went through and edited my files and then added some presets. Saved them and they were then applied to the .wav file.  I know which presets I implemented, but I no longer see them in history. Is it possible to revert them now?

What do I need? Can I use Adobe Audition with a mac and a good pair of Senheiser mics?  Regards! I'm a Novice 🙂   

HiI check, also with Adobe Support, that CD Audio Mastering doesn't work on 14.2 and 14.1 Audition versions..........I use Italian language so i try to translate error about "Impossible to load CD Masterin library. Please reinstall Audition". But uninstall/reinstall activity does't solve.As per all Suite software, each release introduces new "easter eggs" bug....is terrible...So if ou need to create a CD you must install 14.0 version (or previous).regardsDB

hi - I have just watched Durin Gleaves video about the new podcast features to be found under diagnostics and presets. I really want to use Clean Up Podcast Interview preset, but it is not to be found. @DurinG mentioned there was a way to clean preferences to enable them. Could someone explain what I need to do. Thanks in advance. David

Hi Adobe Community. I bounce into Audition from Premiere for a little audio editing and find it's always telling me I'm about to run out of disk space. I have removed temporary files, etc. I have also cleared cached from within Audition. Now it's telling me "Audition has reached the limit of audio data it can use. Please close some files to continue." Which files does it want me to close? I only have the one audio file open. Where should I go to delete? Thanks in advance! 

So for a podcast for a client, this has happened the past two weeks during recording (see attached file). The audio starts recording normally, but a few minutes in (10mins or so?) the audio begins to sound like this. It sounds like it is speeding up? The actual length of the file gets stretched too and loses sync from the zoom recorded file (which records fine). It seems when monitoring the audio while recording they don't notice this happening, but once recorded and playing back it''s obviously screwy. Some things to note:- We are still remote working, and they self record. I only get their files and mix- They are simultaniously recording into zoom as well as Audition, using a Focusrite Scarlet 2i2- Signal path is Sm7 --(xlr)-> cloudlift cl-1 --(xlr)-> Focusrite --(usb)-> PC --> Recording session on their zoom call for producer QC/Audition simultaniously Without being there, I've suggested ensuring that the system sample rate of the Focusrite as well as Audition

How much more difficult could it possibly be to just have it autosave for a basic waveform instead of ONLY doing multitrack saves? My audio just disappeared and when to my cloud and it only saves MULTI-track?What is the possibly use for only saving one type and NOT the other?

how can i change my language to chinese ? 

I was wondering if some brilliant person out there could assist me with figuring out why my recording is so spectacularly crappy. 😞 I do voice over using Adobe Audition CS6 with a Neumann TLM 103, but lately I keep hearing this weird echo sound toward the end of sentences. It doesn't always happen, but it's enough that I feel like it continually ruins the recording. I've attached a sample here. Don't mind the plosives and horrible ssss's. At the end of the word "morning" and the word "America," you can here the weird echo "vroom" sound. I don't even know how to describe it, but it is driving me absolutely nuts. You can actually hear it throughout the recording, but it is especially bad at the end of sentences. Does anyone know what this is and how I could fix it? I don't have the best studio set up, but I'm surrounding myself with professional studio foam. My walls are concrete though, and the floor is tile. Could that be the problem? I've done voice over for ove

Hi! I have to include parts of interviews that were recorded during the Zoom conference (through the Zoom application) to the podcast I'm making. Of course, the quality of the sound is quite bad but those are the only recordings we have. Does anyone have any tips on working with those audios in order to make them sound anyhow better than they are?  Thank you!

Ctrl-Shift N for a new file gives me two tracks on my timeline. For the life of me, I cannot find how to view one single waveform. I attach what it used to be and what it is now. I am a simple audiobook reader and I jst want to see one waveform track.This is the result of a 4-hour stint yesterday trying to reinstate my crashed Acc. Eventually, a really expert guy from adobe took over my computer for about half an hour cleaned uninstalled reinstalled with 14.2, which on my computer still gives the blocking on Spectral display, so I have reinstalled 13.0.13 and in this process have lost all my presets, etc, and find I cannot open a new file with just one track. Can anyone help, please

Hi,Since Windows 10 update in January. Been having  recording problems with Audition version 1.5Use 2 sound cards Behrenger and Realtek and updated drivers.It is an old version of Audition. Is it compatible with Windows 10. Any advice would be gratefully recieved.thanks, Josh 

Wheneven i have an audio clip loaded in audition and press the play button the audio cuts really loudly over the audio clip and is then fine. it doesnt change the file or anything like that but it makes it hard to edit smaller portions because i have to go back 5 extra seconds to hear it because the clip is crackling up until that point. it didnt happen before about a week ago but its every time i press the play button to listen to a clip. the audio files sound fine when played through any other software its just with audition. Thank you

I recently formatted my pc so i could install some SSD on it. since i installed the adobe package, all seems to be fine, except for Audition. It opens with a lot of blank spaces and is i reshape the window it kinda of shows the missing parts but then another part goes blank. Any help on that? 

Hi.I've tried Google searches and another Audition group and so far have no answer for this mystery.  'Hoping someone here has the answer.I've been runningn my trusty old 3.1 for more than a year on Win10 with no problem.  Yesterday it started locking up everything the moment I tried to start playing a file.  But only in Edit mode.  I can open, move, cut/copy, paste, highlight...but press the space bar or click the play button and everything freezes.  I have to force a re-start on the computer, since I can no longer get to task manager. Have emptied every cache I can find, checked to see I have enough disc space/temp folders available, run spybot and malwarebytes, updated as many drivers as I can find.  Nothing changes.Any ideas?  Thank you in advance.

Auditon 14.2 for the Apple M1 has removed the Loudness Radar which was a somewhat critical tool for broadcast TV work.  There exists a tiny loudness meter to replace it, with a tiny momentary bar that replaces the Loudness Radar. Any fix to get it back in operation?  Would running Audtition in Rosetta be a solution? 

All of a sudden I'm getting a message about hardware. When I go to Preferences and Audio Channel Mapping it tells me what my device is (Yeti Stereo) but it's telling me that [L] (Mono) is (Unavalable)

Hello there. can anyone tell me if the Audition Portal is working for them? Nothing from the main page will open for me.Jimmy 

I'm editing audio that I brought into Audition from Premiere using the interchange. Throughout the process it has shown all my clips in the Multitrack view, and then I've been able to double-click each clip to edit it in Waveform view. I was working on a clip in Waveform when Audition crashed. It restarted in Multitrack view, and there are 2 clips missing. I checked the Temp folder on my main drive and there are no backups there. There is a backup folder within the Audition Interchange folder inside the Premiere Project folder, but all of those backups are also missing those same clips. And the clips are totally missing from the Multitrack, not like in Premiere when the clip is still on the Timeline and you can just click on it to relink it. How can I restore the session or just get those 2 clips back where they're supposed to be?

I got the rodecaster pro and have it setup with the ASIO4ALL driver with Audition.  I have all the multichannels setup and can record tracks no problem. However, I cannot hear the playback at all, not through the rodecaster pro or my laptop speakers even though the equaliser is telling me that an audio signal is being played back.  When I go into the audio channel mapping, it states that there are no connected device channels in the output segment. 

Hi there folks, I'm an Audition newbie (but longtime user of many other Adobe apps), and would love some help with the following issue. Thanks! I am using the Soundcraft 12FX mixer to mix two seperate audio sources and send them to my laptop via USB, recording them with Audition's Multitrack mode. By setting up two channels to Record and Monitor, and setting their inputs to come from the mixer (labelled as Analogue 1 and Analogue 2 by the Mixer) I am able to record two seperate audio tracks in. However, both channels record at a relatively low volume and are complete unresponsive to any changes I make on the mixer. I may have misunderstood some things about sending audio data over USB, but I would have expected increasing the volume at the mixer end of things to also increase the volume of that track within Audition. but it doesn't. Instead, all levels are completely 'static', and any changes on the mixer are ignored!?  If it's useful to know, my mixer drivers are u

April 2021'''just downloaded trial of audition to windows 10 laptop.Using Allen Heath 16x2 mixwizard 4 with usb card.Checking out mixer in audition with mic connected to channel one of mixwizard.Arm 8 trax in audition,get signal on all trax.Shouldn't I only be getting signal on track one only ?I record multi trax at once(sequences),need instruments to only record on their own designated track.....Help !

i used music enhance on audition and now its gone and i cant use it anymore. i used it on one song, how do i get it back. i used low pass on the eq on one song and now i cant use it again. i cant find it or use it. how do i get these effects back